|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-05-2020, 10:32 PM
|
#1 |
|
Senior Member
 Join Date: Jan 2013
Location: Napa, CA
Posts: 240
|
P/Ns for '83 C30 Crew Cab front (DRW) wheel bearings?
I am collecting parts for installing the drop spindles & springs on my 1983 Chevy C30 Crew Cab 2wd Dually and I will be installing all new parts including bushings, tie rod ends, rotors etc.
Are the following P/Ns correct for the inner and outer wheel bearings? Front Inner: AC Delco S21 (#00457232, 457232) Front Outer: AC Delco 457043 (#00457043, 9431854)
__________________
Sent by the random thoughts from the voices in my head... |
|
|
|
09-08-2020, 06:44 PM
|
#2 |
|
Senior Member
Join Date: Jan 2013
Location: Napa, CA
Posts: 240
|
Re: P/Ns for '83 C30 Crew Cab front (DRW) wheel bearings?
No one????
__________________
Sent by the random thoughts from the voices in my head... |
|
|
|
|
09-08-2020, 07:36 PM
|
#3 |
|
Registered User
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
|
Re: P/Ns for '83 C30 Crew Cab front (DRW) wheel bearings?
sure it needs bearings and races yet ? lot of good money to spend on most parts that dont need changed out yet .
i just serviced my dana 60 1ton front on my plow truck . had to swap out rotors and the last time it was apart was 2001 ish and prob a good 50-60k miles and HARD miles of mud tires / offroading / plowing / daily driver . and all i had to do was clean / check / repack with new grease and good to go .
__________________
77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great. |
|
|
|
|
09-08-2020, 08:06 PM
|
#4 | |
|
Senior Member
Join Date: Jan 2013
Location: Napa, CA
Posts: 240
|
Re: P/Ns for '83 C30 Crew Cab front (DRW) wheel bearings?
Quote:
Anyone know if those P/Ns are correct?
__________________
Sent by the random thoughts from the voices in my head... |
|
|
|
|
|
09-09-2020, 10:00 AM
|
#5 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,910
|
Re: P/Ns for '83 C30 Crew Cab front (DRW) wheel bearings?
I don't know GM numbers. I just used local auto parts replacements. Timkem is what I used if I remember correctly.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
