Radio - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gary2232 · 03-30-2009, 01:46 PM

Was at the GoodGuys car show this weekend. i am looking for a radio/sterio that will fit into dash (72 chevy) with out cutting and not spending a bunch of money. I found some at show but way to much money. Ant suggestions?

tecky11 · 03-30-2009, 06:59 PM

2 questions.
1. does your truck have an existing radio?
2. if so it is probably a single din radio at most they are 50-60 at walmart or solemplace like that

Outlaw_71 · 04-03-2009, 06:47 PM

This is what I plan to put in my new 71-

http://www.retrosoundusa.com/products/details/id/9

Supposedly they fit right where the old on would have gone.

Longhorn Man · 04-03-2009, 10:47 PM

tecky, if he doesn't want to cut his dash, then he probably doesn't have a din sized radio... that would have him complaining that someone cut the dash on his truck.

The first thing we need to figure, is what kind of money Gary is lookin to spend. The ones made fot fit and look some what like they belong there are not cheap, and most say they don't sound good either.

***Liz*** · 04-03-2009, 10:55 PM

moved to truck audio..

AceX · 04-04-2009, 08:59 AM

I'm gonna have to do a write up on this eventually. This quesiton is asked some many times...

Ok, basically, there's two companies out there that offer something that will work, both are offered through LMC and both are not that cheap.

Custom Auto Sound is the first of the two. Their products fit well at first, but wear easily and sound bad.

Retro Sound is the second one and from what I am told they have a much better product than Custom Auto Sound. There's a couple members here with their new parts and I've only heard one complaint, but their customer service is top notch.

dan42 · 04-04-2009, 11:40 PM

Ditto - although I have sent mine in twice so far. (retrosound). They are going to send me a new unit in a couple of days, and hopefully this will be the last one. I have been having problems with the thumb drive unit. My thinking is to keep the dash whole (although I cut my doors today) in the hopes that someday the new technology will not require a extra wide hole to accomodate the media it uses (i.e, CD's). I will keep this section posted as to how this unit is working out for me. They have been very good in working with me but I believe that their source in China has quality control issues. Stay tuned.

Riveted1 · 04-08-2009, 07:13 PM

If it doesn't have to be anything special, why not go on Fleabay or the like and just find a shaft radio? Probably can get one for cheap. Maybe even find one that controls a CD changer....

gary2232 · 04-15-2009, 06:39 PM

Thanks for all the replys. great info here. The retro is what I would like to do now that i see it. Thanks for link. I was hoping for a cheaper setup but it looks like I will need to spend on this. Do not want to cut dash. Thanks again and sorry for the late responce got busy at work.

03-30-2009, 01:46 PM	#1
gary2232 Registered User Join Date: Jul 2008 Location: Tracy Ca Posts: 171	Radio Was at the GoodGuys car show this weekend. i am looking for a radio/sterio that will fit into dash (72 chevy) with out cutting and not spending a bunch of money. I found some at show but way to much money. Ant suggestions?

03-30-2009, 06:59 PM	#2
tecky11 Registered User Join Date: Jan 2009 Location: phoenix,AZ Posts: 451	Re: Radio 2 questions. 1. does your truck have an existing radio? 2. if so it is probably a single din radio at most they are 50-60 at walmart or solemplace like that

04-03-2009, 06:47 PM	#3
Outlaw_71 Registered User Join Date: Mar 2009 Location: Seymour Tennessee Posts: 72	Re: Radio This is what I plan to put in my new 71- http://www.retrosoundusa.com/products/details/id/9 Supposedly they fit right where the old on would have gone.

04-03-2009, 10:47 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Radio tecky, if he doesn't want to cut his dash, then he probably doesn't have a din sized radio... that would have him complaining that someone cut the dash on his truck. The first thing we need to figure, is what kind of money Gary is lookin to spend. The ones made fot fit and look some what like they belong there are not cheap, and most say they don't sound good either.

04-03-2009, 10:55 PM	#5
*Liz* Catchy title goes here.. Join Date: Mar 2002 Location: Rockwell, NC Posts: 39,731	Re: Radio moved to truck audio..

04-04-2009, 08:59 AM	#6
AceX >130dB Moderator Join Date: Aug 2006 Location: Sacramento, CA Posts: 2,130	Re: Radio I'm gonna have to do a write up on this eventually. This quesiton is asked some many times... Ok, basically, there's two companies out there that offer something that will work, both are offered through LMC and both are not that cheap. Custom Auto Sound is the first of the two. Their products fit well at first, but wear easily and sound bad. Retro Sound is the second one and from what I am told they have a much better product than Custom Auto Sound. There's a couple members here with their new parts and I've only heard one complaint, but their customer service is top notch. __________________ Living Life @ 130dB LED Tail Light Conversion; How-to Friend. Father. Brother. RIP El Jay ------------------------------------------------------------------------------------------------------------------------- CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum.

04-04-2009, 11:40 PM	#7
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: Radio Ditto - although I have sent mine in twice so far. (retrosound). They are going to send me a new unit in a couple of days, and hopefully this will be the last one. I have been having problems with the thumb drive unit. My thinking is to keep the dash whole (although I cut my doors today) in the hopes that someday the new technology will not require a extra wide hole to accomodate the media it uses (i.e, CD's). I will keep this section posted as to how this unit is working out for me. They have been very good in working with me but I believe that their source in China has quality control issues. Stay tuned. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

04-08-2009, 07:13 PM	#8
Riveted1 Tasty Cakes! Join Date: Apr 2003 Location: Gilbert, AZ Posts: 2,112	Re: Radio If it doesn't have to be anything special, why not go on Fleabay or the like and just find a shaft radio? Probably can get one for cheap. Maybe even find one that controls a CD changer.... __________________ I'm a little and a lot Ground beef: A cow with no legs. ---------------- '66 Chevy SWB "Penny" '67 Chevy Big Window SWB- aka "Pearl" '72 Burb- "Betty" "It's not a hearse dammit" '99 Chevy Ext. cab Silverado

04-15-2009, 06:39 PM	#9
gary2232 Registered User Join Date: Jul 2008 Location: Tracy Ca Posts: 171	Re: Radio Thanks for all the replys. great info here. The retro is what I would like to do now that i see it. Thanks for link. I was hoping for a cheaper setup but it looks like I will need to spend on this. Do not want to cut dash. Thanks again and sorry for the late responce got busy at work.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.