|
08-22-2013, 10:01 AM
|
#1 |
|
Registered User
Join Date: Jul 2013
Location: Metrowest, MA
Posts: 254
|
Steering box leak
I believe I am leaking at the joint just above the steering box, although it is kind of hard to see in the pictures. Do I need a new seal in that joint, or can I tighten down the bolts at the joint? How hard is the joint change? Also, what power steering fluid is the correct stuff?
 
|
|
|
|
08-22-2013, 02:13 PM
|
#2 |
|
Registered User
Join Date: Dec 2011
Location: visalia ca
Posts: 1,480
|
Re: Steering box leak
I just went through this same thing I put new seals 3 months ago this morning found me a little puddle under my truck :-( I've heard good and bad about seals long run its up to you
|
|
|
|
|
08-23-2013, 04:42 PM
|
#3 |
|
Registered User
Join Date: Aug 2010
Location: Fredericksburg, VA
Posts: 14
|
Re: Steering box leak
I had the same problem and changed my seal and joint about 6 months ago and haven't had any issues since. It's not that bad of a job once you figure out how everything comes off. Also make sure you get the right rag joint for your truck. On my 71 the shaft was a bit wider than the hole on the 69-72 joint the parts guy sold me, which wound up splitting when I tightened it down.
Posted via Mobile Device |
|
|
|
|
08-23-2013, 10:59 PM
|
#4 |
|
Registered User
Join Date: Nov 2009
Location: Cranbrook, BC
Posts: 253
|
Re: Steering box leak
Who carries the joint/seals? In Canada can you get them at Lordco? Or, which carrier in the states? Mine leaks horribly. I was thinking I would have to change the whole box.
|
|
|
|
|
08-24-2013, 08:39 AM
|
#5 |
|
Registered User
Join Date: Aug 2010
Location: Fredericksburg, VA
Posts: 14
|
Re: Steering box leak
I originally thought the same thing about mine, so I figured it was worth the $10 for the seals to see if that would fix it. I don't know about Canada, but I was able to get them at Advance Auto Parts down here.
|
|
|
|
|
08-25-2013, 01:12 AM
|
#6 |
|
Registered User
Join Date: Nov 2009
Location: Cranbrook, BC
Posts: 253
|
Re: Steering box leak
Definitely worth the price. Will see what Lordco carries.
|
|
|
|
|
08-25-2013, 11:57 AM
|
#7 |
|
Registered User
 Join Date: Dec 2002
Location: Northern Virginia
Posts: 1,267
|
Re: Steering box leak
DugJones do you have a part number or tell me what you asked for at advanced I have the same problem
Thanks |
|
|
|
|
08-27-2013, 05:24 PM
|
#8 |
|
Registered User
Join Date: Mar 2013
Location: Houston
Posts: 28
|
Re: Steering box leak
I rebuilt my entire box and replaced all the seals for about $45, tedious work but saved about $300 rebuilding instead of buying new, if your going to go through pulling everything loose and taking it out to work on it just replace all the seals and bands that come in the kit. Mine hasn't leaked since.
|
|
|
|
|
08-27-2013, 08:28 PM
|
#9 |
|
Registered User
Join Date: Nov 2007
Location: NLR, AR
Posts: 1,387
|
Re: Steering box leak
I just replaced my whole box with a reman because I read and heard horror stories about rebuilding pumps.
__________________
2008 Sierra k3500 LMM 1994 s10 blazer 4x4 1991 Camaro Vert Rusted in Half  RIP1972 Jimmy 4x4 L05,4L60E,np205http://67-72chevytrucks.com/vboard/s...d.php?t=546364 1967 C10 L6/3tree(dads truck) |
|
|
|
|
08-27-2013, 10:06 PM
|
#10 |
|
Registered User
Join Date: Mar 2013
Location: Houston
Posts: 28
|
Re: Steering box leak
If your halfway mechanically inclined, which I think most of us are, its not that bad, I rebuilt mine by watching a you tube video of how to do it!
|
|
|
|
|
08-28-2013, 07:54 AM
|
#11 |
|
Registered User
Join Date: Dec 2002
Location: Northern Virginia
Posts: 1,267
|
Re: Steering box leak
Do you have a you tube link
Thanks |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
