I need a simple measurement - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Grumpy old man** · 06-02-2019, 10:51 AM

I need a measurement from a stock 4 barrel small block mounted in the front 2 holes.

from the center stud of the carb to the top of the fire wall .

________________l firewall
l ^^
l
l
carb stud

**HO455** · 06-02-2019, 12:54 PM

From my 2wd Burban. The red line is 11" +/- a 1/32. (The stud isn't perfectly straight but it was handy) I'm not sure about your reference to the front holes. As you can see it has an Edlebrock and there may be a slight difference if your using a different carb.
I hope this helps.

**Grumpy old man** · 06-02-2019, 01:01 PM

PERFECT ! I'm mocking up this cowl plenum and needed a good idea of how it would measure out to the carb .

72c20customcamper · 06-02-2019, 01:33 PM

I have to say you do nice work , for a grumpy old man.

**AussieinNC** · 06-02-2019, 05:31 PM

Secret....he is not grumpy at all....

He is a sincere, intelligent and personable person blessed with a huge amount of knowledge and a sweet disposition....

**HO455** · 06-02-2019, 11:48 PM

Quote:

Originally Posted by Grumpy old man

PERFECT ! I'm mocking up this cowl plenum and needed a good idea of how it would measure out to the carb .

Glad to help. It's looking good so far. I will be looking forward to more progress photos.

**Madkidd007** · 06-03-2019, 05:23 AM

Quote:

Originally Posted by Grumpy old man

PERFECT ! I'm mocking up this cowl plenum and needed a good idea of how it would measure out to the carb .

Funny how I’ve never thought about cowl induction vs a cowl hood that I don’t myself like. Something tells me more will follow.

**Grumpy old man** · 06-03-2019, 07:06 AM

Quote:

Originally Posted by Madkidd007

Funny how I’ve never thought about cowl induction vs a cowl hood that I don’t myself like. Something tells me more will follow.

HaHa , This cowl plenum completely changed this truck build a number of times over the last few years , Here's where the changes started .

http://67-72chevytrucks.com/vboard/s...d.php?t=711269

http://67-72chevytrucks.com/vboard/s...d.php?t=743444

A lot has to be done to use this , closing off the interior vents to avoid fumes , vintage air install , I'll be using this style air cleaner by removing the snorkel and adding a 4" oval to attach some flex line to allow for engine torque ,Sending it out for chrome once it fits . stainless screen under cowl and inside where the plenum mouth is to keep any thing from clogging it up along with making sure it drains correctly , etc etc But it should look cool when it's done

**Grumpy old man** · 06-03-2019, 07:25 AM

I think with 4" hose and this air filter it should move plenty of air for my needs .

06-02-2019, 10:51 AM	#1
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	I need a simple measurement I need a measurement from a stock 4 barrel small block mounted in the front 2 holes. from the center stud of the carb to the top of the fire wall . ________________l firewall l ^^ l l carb stud __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

06-02-2019, 12:54 PM	#2
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 10,804	Re: I need a simple measurement From my 2wd Burban. The red line is 11" +/- a 1/32. (The stud isn't perfectly straight but it was handy) I'm not sure about your reference to the front holes. As you can see it has an Edlebrock and there may be a slight difference if your using a different carb. I hope this helps. Attached Images __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban the WMB,1991 S(stink)-10 Blazer,1969 GTO, 1970 Javelin, 1952 F2 Ford 4X4, 29 Model A, 72 Firebird. 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

06-02-2019, 01:01 PM	#3
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: I need a simple measurement PERFECT ! I'm mocking up this cowl plenum and needed a good idea of how it would measure out to the carb . Attached Images __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

06-02-2019, 01:33 PM	#4
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,141	Re: I need a simple measurement I have to say you do nice work , for a grumpy old man. __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

06-02-2019, 05:31 PM	#5
AussieinNC Moderator Join Date: Jun 2017 Location: Cherryville, NC Posts: 2,155	Re: I need a simple measurement Secret....he is not grumpy at all.... He is a sincere, intelligent and personable person blessed with a huge amount of knowledge and a sweet disposition.... __________________ Family and country before all others... 2006 Chevy Silverado (Daily Driver) 2012 Chevy Equinox

06-03-2019, 07:25 AM	#9
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: I need a simple measurement I think with 4" hose and this air filter it should move plenty of air for my needs . Attached Images __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.