Jason's Bagged Farm Truck - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jdoisher · 07-10-2014, 08:11 AM

Quote:

Originally Posted by boonedogs72

What did you use to cut the housing?

A 4" cut off wheel.

Quote:

Originally Posted by Monte's62

Jason, on your pancaked crossmember I have seen many on here before and I assume everyone is trying to get the max amount, but I have missed exactly what the depth of the cut actually is. It looks to be 1 to 1 1/2 inches. Can you tell me what that measure is. Thanks again and great job on the truck... Again.

I'm not sure of the question, but a total of two inches are taken out of the center.

boonedogs72 · 07-10-2014, 11:15 AM

Wow looks perfect for using a cutoff wheel.

SCOTI · 07-10-2014, 05:51 PM

Quote:

Originally Posted by boonedogs72

Wow looks perfect for using a cutoff wheel.

My thought as well. I never can get a true 90° cut. I try to clean things up as much as possible after but never seem to be able to keep things truely square.

Monte's62 · 07-10-2014, 11:01 PM

Thanks lowlife3. I appreciate the tip!!!

jdoisher · 07-11-2014, 08:04 AM

Quote:

Originally Posted by SCOTI

My thought as well. I never can get a true 90° cut. I try to clean things up as much as possible after but never seem to be able to keep things truely square.

After cutting the axle tube and squaring it up I beveled the tubes and welded it with a 210MVP, turned way up!!
Jason

darkhorse970 · 07-11-2014, 08:42 AM

Very nice work, I am following along.

Mattyparty · 07-20-2014, 11:18 PM

Subscribed!!!

jdoisher · 07-23-2014, 03:26 PM

Name: FRAME.JPG
Views: 2454
Size: 45.5 KB

My latest Instagram post!! I didn't take any pictures of assembly but you get the idea. I bought Porterbuilt control arms for this truck (went ahead and bought a set for her truck too!!) they are 1" forward and 1" shorter (nice parts by the way!!) and his pan hard rod kit. Also got a disc brake kit with 2 1/2 dropped spindles. Was able to get most of the parts on but haven't finished yet. As soon as I get the rotors on I can figure out what back space wheels I want to order!! Than I can really get after it!! Stay tuned!!
Jason

**lolife99** · 07-23-2014, 03:37 PM

Looks great!!!

aggie91 · 07-23-2014, 04:05 PM

Nice!

Thunderwagen · 07-23-2014, 04:47 PM

Awesome work man. I may have to pick your brain some since you arent too far from me. I should be picking up a 64 this weekend.

hopped up · 07-23-2014, 05:34 PM

Awesome work! Can't believe I hadn't subscribed.

Modges'66 · 07-23-2014, 09:50 PM

O.K. Dino Jr.!!!
I have been watchin forever!
It looks like second time around that you know exactly what to do!!
And for sure, the third will be the charm!!!
Forge ahead, things are lookin sawweeeeet!

64chevtruck · 07-24-2014, 12:44 AM

GO JASON! Thanks for the pics bud, Your welding is the cats ass.

Have a good week

jdoisher · 07-25-2014, 12:56 PM

Quote:

Originally Posted by lolife99

Looks great!!!

Quote:

Originally Posted by aggie91

Nice!

Thanks guys!!

Quote:

Originally Posted by Thunderwagen

Awesome work man. I may have to pick your brain some since you arent too far from me. I should be picking up a 64 this weekend.

PM me anytime!!!

Quote:

Originally Posted by hopped up

Awesome work! Can't believe I hadn't subscribed.

Stay tuned for more!!

Quote:

Originally Posted by Modges'66

O.K. Dino Jr.!!!
I have been watchin forever!
It looks like second time around that you know exactly what to do!!
And for sure, the third will be the charm!!!
Forge ahead, things are lookin sawweeeeet!

His name and mine in the same sentence is a honor!! But doing one makes the other that much easier!!

Quote:

Originally Posted by 64chevtruck

GO JASON! Thanks for the pics bud, Your welding is the cats ass.

Thank you very much!!

Have a good week

Will do!!

I have been so busy that I haven't had a chance to put the rotors on and get a wheel measurment!! My buddy John and I are doing drag week this year and its only a month away and the car is a little (a lot) apart!! So I spend almost all of my extra time with him working on the car!! We've only been talking about doing this the last ten years!!!

Thanks so much guys!!
Jason

Thunderwagen · 07-25-2014, 01:17 PM

What are yall running in drag week?

jdoisher · 07-25-2014, 04:13 PM

Quote:

Originally Posted by Thunderwagen

What are yall running in drag week?

80 LS1 powered Malibu NOS car.
Jason

SCOTI · 07-25-2014, 05:55 PM

Quote:

Originally Posted by jdoisher

80 LS1 powered Malibu NOS car.
Jason

Just an LS1 huh?

jdoisher · 07-25-2014, 06:10 PM

Quote:

Originally Posted by SCOTI

Just an LS1 huh?

lol. 408 with ported LS3 heads, mild cam, little shot. Hoping for 8.90s and make the 1500 mile or so trip!!

SCOTI · 07-25-2014, 06:20 PM

Quote:

Originally Posted by jdoisher

lol. 408 with ported LS3 heads, mild cam, little shot. Hoping for 8.90s and make the 1500 mile or so trip!!

Oh ok..... just an LS 😉

Thunderwagen · 07-25-2014, 06:36 PM

Nice! I'm building a 90 gmc RCSB with a forged 370 with afr 225s and a T6 borg warner right now. I'm aiming at 9.99 or quicker with it.

SCOTI · 07-25-2014, 07:27 PM

Quote:

Originally Posted by Thunderwagen

Nice! I'm building a 90 gmc RCSB with a forged 370 with afr 225s and a T6 borg warner right now. I'm aiming at 9.99 or quicker with it.

Ohoo... That sounds sweet. Build thread yet?

Thunderwagen · 07-27-2014, 12:59 PM

Yeah there's a link in my sig.

rusty76 · 07-27-2014, 07:32 PM

I wanna do drag week as well. Neato.

Mad Rods · 07-28-2014, 12:22 AM

Nice!!!

07-10-2014, 11:15 AM	#102
boonedogs72 Registered User Join Date: Apr 2005 Location: redding ca Posts: 1,438	Re: Jason's Bagged Farm Truck Wow looks perfect for using a cutoff wheel.

07-10-2014, 11:01 PM	#104
Monte's62 Registered User Join Date: Dec 2013 Location: Dallas Ga Posts: 308	Re: Jason's Bagged Farm Truck Thanks lowlife3. I appreciate the tip!!!

07-11-2014, 08:42 AM	#106
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,103	Re: Jason's Bagged Farm Truck Very nice work, I am following along. __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941

07-20-2014, 11:18 PM	#107
Mattyparty Registered User Join Date: Nov 2012 Location: Wichita, ks Posts: 134	Re: Jason's Bagged Farm Truck Subscribed!!! __________________ My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=602142

07-23-2014, 03:26 PM	#108
jdoisher Registered User Join Date: Jun 2012 Location: Denton Texas Posts: 407	Re: Jason's Bagged Farm Truck My latest Instagram post!! I didn't take any pictures of assembly but you get the idea. I bought Porterbuilt control arms for this truck (went ahead and bought a set for her truck too!!) they are 1" forward and 1" shorter (nice parts by the way!!) and his pan hard rod kit. Also got a disc brake kit with 2 1/2 dropped spindles. Was able to get most of the parts on but haven't finished yet. As soon as I get the rotors on I can figure out what back space wheels I want to order!! Than I can really get after it!! Stay tuned!! Jason __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=531177 Maggie's truck!

07-23-2014, 03:37 PM	#109
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,681	Re: Jason's Bagged Farm Truck Looks great!!! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

07-23-2014, 04:05 PM	#110
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Jason's Bagged Farm Truck Nice! __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

07-23-2014, 04:47 PM	#111
Thunderwagen Registered User Join Date: May 2011 Location: Fort Worth, Tx Posts: 63	Re: Jason's Bagged Farm Truck Awesome work man. I may have to pick your brain some since you arent too far from me. I should be picking up a 64 this weekend. __________________ 1990 GMC Sierra http://67-72chevytrucks.com/vboard/s...d.php?t=617587

07-23-2014, 05:34 PM	#112
hopped up Registered User Join Date: Jul 2010 Location: los angeles,ca Posts: 3,617	Re: Jason's Bagged Farm Truck Awesome work! Can't believe I hadn't subscribed.

07-23-2014, 09:50 PM	#113
Modges'66 Registered User Join Date: Feb 2012 Location: Grand Rapids, Michigan, otherwise known as Beer City U.S.A. Posts: 1,081	Re: Jason's Bagged Farm Truck O.K. Dino Jr.!!! I have been watchin forever! It looks like second time around that you know exactly what to do!! And for sure, the third will be the charm!!! Forge ahead, things are lookin sawweeeeet! __________________ My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=512904

07-24-2014, 12:44 AM	#114
64chevtruck Registered User Join Date: Aug 2013 Location: Rochester Wa. Posts: 395	Re: Jason's Bagged Farm Truck GO JASON! Thanks for the pics bud, Your welding is the cats ass. Have a good week __________________ 64 C10 Fleetside LB 4 Sp/292 Build http://67-72chevytrucks.com/vboard/s...d.php?t=602438 70 GMC 1500 Fleetside LB 3OT/350 Build http://67-72chevytrucks.com/vboard/s...83#post6767983 76 GMC CCLB Dually Build http://67-72chevytrucks.com/vboard/s...d.php?t=691612 79 GMC 3500 Fleetside LB 454/400 90 Suburban Silverado 4x4 350/700R4 97 1500 Cheyenne Short Fleet 350/5sp

07-25-2014, 01:17 PM	#116
Thunderwagen Registered User Join Date: May 2011 Location: Fort Worth, Tx Posts: 63	Re: Jason's Bagged Farm Truck What are yall running in drag week? __________________ 1990 GMC Sierra http://67-72chevytrucks.com/vboard/s...d.php?t=617587

07-25-2014, 06:36 PM	#121
Thunderwagen Registered User Join Date: May 2011 Location: Fort Worth, Tx Posts: 63	Re: Jason's Bagged Farm Truck Nice! I'm building a 90 gmc RCSB with a forged 370 with afr 225s and a T6 borg warner right now. I'm aiming at 9.99 or quicker with it. __________________ 1990 GMC Sierra http://67-72chevytrucks.com/vboard/s...d.php?t=617587

07-27-2014, 12:59 PM	#123
Thunderwagen Registered User Join Date: May 2011 Location: Fort Worth, Tx Posts: 63	Re: Jason's Bagged Farm Truck Yeah there's a link in my sig. __________________ 1990 GMC Sierra http://67-72chevytrucks.com/vboard/s...d.php?t=617587

07-27-2014, 07:32 PM	#124
rusty76 Registered User Join Date: Sep 2012 Location: Midway, NC Posts: 3,275	Re: Jason's Bagged Farm Truck I wanna do drag week as well. Neato. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC



Register or Log In To remove these advertisements.

07-28-2014, 12:22 AM	#125
Mad Rods Chevy Only Tx Join Date: May 2009 Location: Pecos,Tx Posts: 1,061	Re: Jason's Bagged Farm Truck Nice!!! __________________ Chevy Only Tx.........

Register or Log In To remove these advertisements.