The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1988 - 1998 GMT400 Chevy & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-18-2014, 08:48 PM   #1
Chevyman91350
Registered User
 
Join Date: May 2014
Location: Connecticut
Posts: 25
Can't find misfire

Hello, this is my first time posting so I hope I can get some help. . I have a 1991 chevy 2500. It has a 350 tbi engine and it is misfiring. It does it a lot when it's cold but still does it warm, I've replaced cts, o2 sensor, new fuel filter, new distributor cap, and rotor, timing is at 5 degrees advanced. Spark plugs were replaced last summer. Truck has 100,000 miles. Thanks
Chevyman91350 is offline   Reply With Quote
Old 05-19-2014, 06:39 AM   #2
speedygonzales
Registered User
 
speedygonzales's Avatar
 
Join Date: Jan 2006
Location: Smithfield, VA
Posts: 1,501
Re: Can't find misfire

Identify the cylinder first, then decide on what testing you want to do. Start by pulling one plug wire at a time. Then you can do things like swapping plug wires to see if the problem moves or not. Then.........
__________________
99 Z71 (98 body style)
Pride and joy
speedygonzales is offline   Reply With Quote
Old 05-19-2014, 08:25 PM   #3
Chevyman91350
Registered User
 
Join Date: May 2014
Location: Connecticut
Posts: 25
Re: Can't find misfire

I'm pretty sure it's multiple cylinders. I'm getting plug wires tomorrow
Chevyman91350 is offline   Reply With Quote
Old 05-20-2014, 06:27 PM   #4
mountie
Registered User
 
mountie's Avatar
 
Join Date: Jun 2011
Location: Bradenton, Fla.
Posts: 1,100
Re: Can't find misfire

Quote:
Originally Posted by Chevyman91350 View Post
I'm pretty sure it's multiple cylinders. I'm getting plug wires tomorrow
Spark plugs a year old? Inspect them.
My '88 2500 5.7 timing is 0. ( disconnect the little wire above/left of distributor)
__________________
'70 GTO Midnight Blue
'88 GMC Sierra SLE 392,000 miles-(2018) sold to Classic car shop in Germany.
'93 Cadillac STS Black
'93 Mercedes SL 500 Teal
'86 Yamaha FZ750 - 15,000 RPM
'86 Yamaha FJ1200 - Criminally Fast
2016 Ferrari 488 GTB, I drive it - don't own it.
'05 GMC Yukon XL , SLT 4wd ( just purchased 2018)
mountie is offline   Reply With Quote
Old 05-20-2014, 09:17 PM   #5
Chevyman91350
Registered User
 
Join Date: May 2014
Location: Connecticut
Posts: 25
Re: Can't find misfire

Put new plug wires on today. Still doin it. I'm thinking ignition module. I do want to get a fuel pressure test done as well. I just hate to keep throwing money at it
Chevyman91350 is offline   Reply With Quote
Old 05-20-2014, 09:18 PM   #6
Chevyman91350
Registered User
 
Join Date: May 2014
Location: Connecticut
Posts: 25
Re: Can't find misfire

The plugs are gapped a .040. Did that a week ago
Chevyman91350 is offline   Reply With Quote
Old 05-20-2014, 11:19 PM   #7
Kudzupatch
Registered User
 
Kudzupatch's Avatar
 
Join Date: Apr 2013
Location: GUNTERSVILLE
Posts: 621
Re: Can't find misfire

If I remember right, the gap should be .035, not .040.

But I feel your pain. Been chasing a problem on mine for couple of weeks. Read the FAQ section. Lots of good information on how to test your sensors and trouble shoot your problem. I haven't found mine yet but I have eliminated a lot of stuff without spending money replacing good parts.
Kudzupatch is offline   Reply With Quote
Old 05-21-2014, 09:00 PM   #8
Chevyman91350
Registered User
 
Join Date: May 2014
Location: Connecticut
Posts: 25
Re: Can't find misfire

Ok sweet. I'll look. Any ideas on what it may be?
Chevyman91350 is offline   Reply With Quote
Old 05-21-2014, 09:25 PM   #9
mountie
Registered User
 
mountie's Avatar
 
Join Date: Jun 2011
Location: Bradenton, Fla.
Posts: 1,100
Re: Can't find misfire

Double check the center coil - contact under the distributor cap. Make sure it still has a spring load against the rotor center.
I solved a miss after finding / replacing.
__________________
'70 GTO Midnight Blue
'88 GMC Sierra SLE 392,000 miles-(2018) sold to Classic car shop in Germany.
'93 Cadillac STS Black
'93 Mercedes SL 500 Teal
'86 Yamaha FZ750 - 15,000 RPM
'86 Yamaha FJ1200 - Criminally Fast
2016 Ferrari 488 GTB, I drive it - don't own it.
'05 GMC Yukon XL , SLT 4wd ( just purchased 2018)
mountie is offline   Reply With Quote
Old 05-22-2014, 11:48 AM   #10
Kudzupatch
Registered User
 
Kudzupatch's Avatar
 
Join Date: Apr 2013
Location: GUNTERSVILLE
Posts: 621
Re: Can't find misfire

Quote:
Originally Posted by mountie View Post
Double check the center coil - contact under the distributor cap. Make sure it still has a spring load against the rotor center.
I solved a miss after finding / replacing.
That solved my misfire. Found I had about 4 million ohms resistance (EXTREMELY high) in the coil tower in the distributor cap. This was a cap that was only 6 month old too. Now mine no longer misfires and no more backfiring. Still looking for the that off idle stumble though.
Kudzupatch is offline   Reply With Quote
Old 05-22-2014, 06:09 PM   #11
Chevyman91350
Registered User
 
Join Date: May 2014
Location: Connecticut
Posts: 25
Re: Can't find misfire

I know about the piece under the rotor but how do I check if there's spring to it. That piece was rusted and I took skotch brite to it and cleaned It up. All though I don't think there is electrical contact in that piece. But could that be the problem?
Chevyman91350 is offline   Reply With Quote
Old 05-23-2014, 09:07 AM   #12
Kudzupatch
Registered User
 
Kudzupatch's Avatar
 
Join Date: Apr 2013
Location: GUNTERSVILLE
Posts: 621
Re: Can't find misfire

I think you are misunderstanding. It is not the rotor or anything under it. It is the distributor cap we are talking about. In the center where the coil wire connects. Inside the cap the center post is spring loaded and presses on the rotor.

I used a multi-meter to check the resistance on mine and found out there was serious restriction. Meaning the electricity couldn't flow freely through it.
Kudzupatch is offline   Reply With Quote
Old 05-23-2014, 01:39 PM   #13
Chevyman91350
Registered User
 
Join Date: May 2014
Location: Connecticut
Posts: 25
Re: Can't find misfire

Ok yaw I was confused there. I know what your talking about. But the fact the my distributor cap is 1 month old with less than 50 miles on it makes me think that it is fine. It's a napa brand so it's not a cheap one
Chevyman91350 is offline   Reply With Quote
Old 05-23-2014, 01:40 PM   #14
Chevyman91350
Registered User
 
Join Date: May 2014
Location: Connecticut
Posts: 25
Re: Can't find misfire

Yea^
Chevyman91350 is offline   Reply With Quote
Old 05-23-2014, 03:37 PM   #15
ChevyTech
Registered User
 
Join Date: May 2004
Location: Minnesota
Posts: 4,620
Re: Can't find misfire

Don't be so sure a new part is good.

The quality of the parts everywhere seems to be going down.

Some NAPA parts are ok, but I have been very unhappy with the quality of several parts from NAPA lately. I always look to buy the better quality option from NAPA and still find their parts to be of questionable quality, to unacceptable.
__________________
For those of you that are wondering why you are not getting replies to your thread:
Did you give the model, year, engine, fuel system type, and transmission information?
If it is modified from what came stock from the factory, let us know that too.
ChevyTech is offline   Reply With Quote
Old 05-23-2014, 05:02 PM   #16
Chevyman91350
Registered User
 
Join Date: May 2014
Location: Connecticut
Posts: 25
Re: Can't find misfire

Ok. So what is the best way to test that part of the cap? An ohms test would tell me. I'll do it tomorrow as I'm going to see a mechanic
Chevyman91350 is offline   Reply With Quote
Old 05-24-2014, 03:02 PM   #17
ChevyTech
Registered User
 
Join Date: May 2004
Location: Minnesota
Posts: 4,620
Re: Can't find misfire

When looking for a misfire in the shop the fist thing we do is put the scope on it, and watch the scope while power braking. This way we can see the firing voltage of the individual cylinders. If a cylinder varies from the others is shows. A low firing voltage can be from, a lack of compression on a cylinder, or a secondary ignition leak. A high firing voltage and you look for a open, plug wire. High firing voltage on all cylinders and you check the coil wire / cap. Low firing voltage on all cylinders and you suspect a weak coil.

Bad coil wires are common on these trucks. The inner core burns away. Look at both ends of the coil wire.

With no scope:
I would watch and listen for a spark jumping.
If I hear nothing, and it has a dead misfire, I would check one cylinder at a time like Speedy told you to do.
For random misfiring I would use a spray bottle to mist water on it and watch for sparks.

Head gaskets failing between cylinders can start out as a misfire, can cause pinging, progress to backfiring, cause overheating...

I will not throw parts at a problem with the low quality of parts being sold. You could be adding more problems making it harder to fix.

There has not bee enough of a description for me to take a guess at what the problem is.
__________________
For those of you that are wondering why you are not getting replies to your thread:
Did you give the model, year, engine, fuel system type, and transmission information?
If it is modified from what came stock from the factory, let us know that too.
ChevyTech is offline   Reply With Quote
Old 05-25-2014, 06:24 PM   #18
Chevyman91350
Registered User
 
Join Date: May 2014
Location: Connecticut
Posts: 25
Re: Can't find misfire

Hello sorry for the delay. Saw the mechanic today he is thinking it is a fuel problem. Possible injector. I just don't know anymore. Doing a compression test on fuel and cylinders. I will post what I find. Thanks for everyone helping
Chevyman91350 is offline   Reply With Quote
Old 05-25-2014, 08:56 PM   #19
Chevyman91350
Registered User
 
Join Date: May 2014
Location: Connecticut
Posts: 25
Re: Can't find misfire

Just did the engine compression test. They were all 150 except cylinder 8 which was 160.
Chevyman91350 is offline   Reply With Quote
Old 05-26-2014, 09:00 PM   #20
Chevyman91350
Registered User
 
Join Date: May 2014
Location: Connecticut
Posts: 25
Re: Can't find misfire

Fuel pressure test came out ok. Any ideas. Maybe distributor?
Chevyman91350 is offline   Reply With Quote
Old 05-27-2014, 09:50 AM   #21
Cabnchassis
Registered User
 
Join Date: Mar 2014
Location: Redwood City
Posts: 242
Re: Can't find misfire

Is a misfiring or is cutting out like a vacuum leak? If it is cutting out when you first start it up and gets better as it gets warm I'd check the intake manifold gasket and TB base gasket for vacuum leaks as well as everything attached to the intake manifold. IAC valve failure can also cause stumbling.
__________________
1991 R3500 3+3 C+C 6.2/4l80e/14ff Fleetside Dually
1992 K2500 ECLB 5.7/4l80e/14sf(g80) 8600gvwr
1991 CR500 (95 Burb wouldn't stop catching fire )
Cabnchassis is offline   Reply With Quote
Old 05-27-2014, 04:19 PM   #22
ChevyTech
Registered User
 
Join Date: May 2004
Location: Minnesota
Posts: 4,620
Re: Can't find misfire

Quote:
Originally Posted by Chevyman91350 View Post
Fuel pressure test came out ok. Any ideas. Maybe distributor?
If the distributor shaft will wiggle sideways, replace the distributor.

On these distributors the housing/upper bushing area can get so worn out that the shaft will move sideways so far that the points on the pickup coil pole piece get hit by the reluctor points on the shaft. When this happens the ECM receives compromised signal for RPM and timing issues.
__________________
For those of you that are wondering why you are not getting replies to your thread:
Did you give the model, year, engine, fuel system type, and transmission information?
If it is modified from what came stock from the factory, let us know that too.
ChevyTech is offline   Reply With Quote
Old 05-27-2014, 05:05 PM   #23
Kudzupatch
Registered User
 
Kudzupatch's Avatar
 
Join Date: Apr 2013
Location: GUNTERSVILLE
Posts: 621
Re: Can't find misfire

Would this show up in WinALDL or some other software?
Kudzupatch is offline   Reply With Quote
Old 05-27-2014, 06:40 PM   #24
Chevyman91350
Registered User
 
Join Date: May 2014
Location: Connecticut
Posts: 25
Re: Can't find misfire

Well the truck surges in drive or reverse when hot and misfires. So I dont know. And I don't have an obd1 connector.
Chevyman91350 is offline   Reply With Quote
Old 05-27-2014, 06:41 PM   #25
Chevyman91350
Registered User
 
Join Date: May 2014
Location: Connecticut
Posts: 25
Re: Can't find misfire

The distributor shaft does not move at all
Chevyman91350 is offline   Reply With Quote
Reply

Bookmarks

Tags
1991, chevy 350, misfire, tbi 350

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:30 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com