WA Clutch/SM465 trans parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**chev-obsession** · 12-14-2020, 10:40 PM

I have a few Z bars, clutch linkage rods and SM465 parts. Also parting out the sm465 trans. If you need anything else let me know I may have it. Prices are plus shipping. 1 of the Z bars has a weld repair on it. I believe I have a frame bracket I will look for and post pictures.

I AM OPEN TO OFFERS lol

Repaired z bar $10
Z bars $20 each
Spring $10 SOLD
Clutch adjuster rods (pedal to z bar & z bar to pivot fork) $10 each
U joint caps (greasy) $15 SOLD
Pivot fork w/ pivot ball clip $20
Dust shields pair, crack on top of starter hole $20 SOLD
Gear shifter with associated parts to fasten to top of trans came off 69 c10 6cyl 2wd $40
PTO cover with bolts $20
Bellhousing mounting bolts w/ locking tabs $10
Pivot balls on engine side $15 V8 SOLD
3 speed column shift linkage came from 65 c10 6cyl $10
Posted via Mobile Device

**D.PASSMORE** · 12-15-2020, 07:54 AM

What's the issues with the transmission as a whole? Pop-out of gear in 3rd? Common problem with these?

Interested in Top plate assembly (minus shifter) and speedo gear on side.

**chev-obsession** · 12-15-2020, 10:54 AM

Quote:

Originally Posted by D.PASSMORE

What's the issues with the transmission as a whole? Pop-out of gear in 3rd? Common problem with these?

Interested in Top plate assembly (minus shifter) and speedo gear on side.

It never popped out of 3rd, but it didn’t go into 3rd like any of the other gears.
How about $50 on the plate and $10 for the speedo gear plus shipping?

67 Blue Truck · 12-15-2020, 11:04 AM

PM sent on flywheel covers.

Thanks,
Joel

**Sand Wrench** · 12-15-2020, 02:33 PM

In line for the speedo gear.

**D.PASSMORE** · 12-15-2020, 05:34 PM

Quote:

Originally Posted by chev-obsession

It never popped out of 3rd, but it didn’t go into 3rd like any of the other gears.
How about $50 on the plate and $10 for the speedo gear plus shipping?

Sounds good, lets get a shipping quote, see below...
Funds sent

pickupman · 12-16-2020, 10:12 AM

I will take the 2 adjustment rods

**chev-obsession** · 12-18-2020, 02:40 AM

Quote:

Originally Posted by pickupman

I will take the 2 adjustment rods

I made a sale locally on another adjustment rod I had and robbed the Clevis and nuts from the rod on the right. Are you still interested in both rods?

**chev-obsession** · 12-18-2020, 02:43 AM

Quote:

Originally Posted by 67 Blue Truck

PM sent on flywheel covers.

Thanks,
Joel

I have not forgot about your shipping quote on the covers. I will get a quote tomorrow

pickupman · 12-18-2020, 09:22 AM

can you give me an aprox length on them please. and what did they come off of? 2wd or 4wd.
Thanks

**chev-obsession** · 12-18-2020, 12:24 PM

Quote:

Originally Posted by pickupman

can you give me an aprox length on them please. and what did they come off of? 2wd or 4wd.
Thanks

one is 13.5" and the other is 14.5"

I had one rod on my 6 cyl 2wd application, cant remember which one and im not sure of the others original application

67 Blue Truck · 12-18-2020, 12:30 PM

Ok, thanks.

**jimer1964** · 12-18-2020, 01:06 PM

Hi, interested in the parts in picture #5. The 2 universal plates and 4 bolts

**chev-obsession** · 12-18-2020, 06:18 PM

Quote:

Originally Posted by jimer1964

Hi, interested in the parts in picture #5. The 2 universal plates and 4 bolts

$20 shipped + PP fees

**jimer1964** · 12-18-2020, 08:36 PM

Quote:

Originally Posted by chev-obsession

$20 shipped + PP fees

Ok give me a total and payment options

**chev-obsession** · 12-18-2020, 10:37 PM

Quote:

Originally Posted by jimer1964

Ok give me a total and payment options

Pm sent

pickupman · 12-19-2020, 09:24 AM

I think I will go ahead and pas on them,Thanks, sorry for your trouble

**chev-obsession** · 12-27-2020, 07:43 PM

Ttt

**chev-obsession** · 01-14-2021, 12:09 AM

Open to offers on this stuff, don’t be afraid to make an offer if you are interested in something

**chev-obsession** · 01-30-2021, 02:34 PM

Ttt

Awann99 · 01-31-2021, 01:15 PM

Hi. I’m interested in the pedal to z bar rod in pictures 4. The straight one on the right. I think it’s for the I6 style. If the ends are not extremely worn. I also wanted to see if you had a set of the 5 little bolts that hold the starter shield and the flywheel cover on. Thanks.

**chev-obsession** · 01-31-2021, 07:23 PM

Pictures for Awann99. The 6cyl rod is a little worn on one end. Measures about 19.75” center to center and 3/8” diameter rod. I would do $16 shipped to the Dover, TN zip code.

Also found a heavier rod, 19.75” center to center in length and 1/2” diameter rod, but worn on both ends.

Awann99 · 02-04-2021, 03:40 PM

Quote:

Originally Posted by chev-obsession

Pictures for Awann99. The 6cyl rod is a little worn on one end. Measures about 19.75” center to center and 3/8” diameter rod. I would do $16 shipped to the Dover, TN zip code.

Also found a heavier rod, 19.75” center to center in length and 1/2” diameter rod, but worn on both ends.

Looks good I will take the 3/8 thick one that is less worn. Please pm me your PayPal and I’ll get the payment sent out. Thanks.

**chev-obsession** · 02-23-2021, 02:54 PM

Ttt
Posted via Mobile Device

Awann99 · 04-24-2021, 01:50 PM

I need a few more parts if you still have them. I need the longer z bar to pivot fork rod used on i6 trucks. The plug for the reverse lights on the transmission. On that sm465 it looks like there is a Speedo corrector on the speedometer hole. I would like to buy that as well. My Speedo is slow by 10 mph so it may work for me.

12-14-2020, 10:40 PM	#1
chev-obsession Senior Member Join Date: Jul 2008 Location: kennewick, WA Posts: 1,465	Clutch/SM465 trans parts I have a few Z bars, clutch linkage rods and SM465 parts. Also parting out the sm465 trans. If you need anything else let me know I may have it. Prices are plus shipping. 1 of the Z bars has a weld repair on it. I believe I have a frame bracket I will look for and post pictures. I AM OPEN TO OFFERS lol Repaired z bar $10 Z bars $20 each Spring $10 SOLD Clutch adjuster rods (pedal to z bar & z bar to pivot fork) $10 each U joint caps (greasy) $15 SOLD Pivot fork w/ pivot ball clip $20 Dust shields pair, crack on top of starter hole $20 SOLD Gear shifter with associated parts to fasten to top of trans came off 69 c10 6cyl 2wd $40 PTO cover with bolts $20 Bellhousing mounting bolts w/ locking tabs $10 Pivot balls on engine side $15 V8 SOLD 3 speed column shift linkage came from 65 c10 6cyl $10 Posted via Mobile Device Attached Images Last edited by chev-obsession; 12-27-2020 at 07:42 PM.

12-15-2020, 07:54 AM	#2
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,047	Re: Clutch/SM465 trans parts What's the issues with the transmission as a whole? Pop-out of gear in 3rd? Common problem with these? Interested in Top plate assembly (minus shifter) and speedo gear on side. __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

12-15-2020, 11:04 AM	#4
67 Blue Truck Registered User Join Date: Jan 2019 Location: Madison, AL Posts: 41	Re: Clutch/SM465 trans parts PM sent on flywheel covers. Thanks, Joel

12-16-2020, 10:12 AM	#7
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,094	Re: Clutch/SM465 trans parts I will take the 2 adjustment rods __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

12-18-2020, 09:22 AM	#10
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,094	Re: Clutch/SM465 trans parts can you give me an aprox length on them please. and what did they come off of? 2wd or 4wd. Thanks __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

12-15-2020, 02:33 PM	#5
Sand Wrench Senior Member Join Date: Sep 2016 Location: Garnett, Kansas Posts: 279	Re: Clutch/SM465 trans parts In line for the speedo gear. __________________ You ever have one of those mornings where you wake up owning more trucks than you did the night before? 1972 K5 1972 K10 1967 K20 bucket truck

12-18-2020, 12:30 PM	#12
67 Blue Truck Registered User Join Date: Jan 2019 Location: Madison, AL Posts: 41	Re: Clutch/SM465 trans parts Ok, thanks.

12-18-2020, 01:06 PM	#13
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,676	Re: Clutch/SM465 trans parts Hi, interested in the parts in picture #5. The 2 universal plates and 4 bolts

12-19-2020, 09:24 AM	#17
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,094	Re: Clutch/SM465 trans parts I think I will go ahead and pas on them,Thanks, sorry for your trouble __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

12-27-2020, 07:43 PM	#18
chev-obsession Senior Member Join Date: Jul 2008 Location: kennewick, WA Posts: 1,465	Re: Clutch/SM465 trans parts Ttt __________________ 1965 c/10 swb 1969 c/10 lwb

01-14-2021, 12:09 AM	#19
chev-obsession Senior Member Join Date: Jul 2008 Location: kennewick, WA Posts: 1,465	Re: Clutch/SM465 trans parts Open to offers on this stuff, don’t be afraid to make an offer if you are interested in something __________________ 1965 c/10 swb 1969 c/10 lwb

01-30-2021, 02:34 PM	#20
chev-obsession Senior Member Join Date: Jul 2008 Location: kennewick, WA Posts: 1,465	Re: Clutch/SM465 trans parts Ttt __________________ 1965 c/10 swb 1969 c/10 lwb

01-31-2021, 01:15 PM	#21
Awann99 Registered User Join Date: Jan 2018 Location: TN Posts: 257	Re: Clutch/SM465 trans parts Hi. I’m interested in the pedal to z bar rod in pictures 4. The straight one on the right. I think it’s for the I6 style. If the ends are not extremely worn. I also wanted to see if you had a set of the 5 little bolts that hold the starter shield and the flywheel cover on. Thanks.

01-31-2021, 07:23 PM	#22
chev-obsession Senior Member Join Date: Jul 2008 Location: kennewick, WA Posts: 1,465	Re: Clutch/SM465 trans parts Pictures for Awann99. The 6cyl rod is a little worn on one end. Measures about 19.75” center to center and 3/8” diameter rod. I would do $16 shipped to the Dover, TN zip code. Also found a heavier rod, 19.75” center to center in length and 1/2” diameter rod, but worn on both ends. Attached Images __________________ 1965 c/10 swb 1969 c/10 lwb

02-23-2021, 02:54 PM	#24
chev-obsession Senior Member Join Date: Jul 2008 Location: kennewick, WA Posts: 1,465	Re: Clutch/SM465 trans parts Ttt Posted via Mobile Device



Register or Log In To remove these advertisements.

04-24-2021, 01:50 PM	#25
Awann99 Registered User Join Date: Jan 2018 Location: TN Posts: 257	Re: Clutch/SM465 trans parts I need a few more parts if you still have them. I need the longer z bar to pivot fork rod used on i6 trucks. The plug for the reverse lights on the transmission. On that sm465 it looks like there is a Speedo corrector on the speedometer hole. I would like to buy that as well. My Speedo is slow by 10 mph so it may work for me.

Register or Log In To remove these advertisements.