NC Parting a complete 1971 Blazer 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jeffg1010 · 12-26-2011, 06:07 PM

AVAILABLE PARTS LIST -UPDATED: 02/11/12-
There is a lot of photos spread throughout this thread, I added more photos below, but I have over 200 photos in a photobucket album at this link: http://s213.photobucket.com/albums/c...arts%20Blazer/

There is A LOT of good parts on this Blazer and I have tried to document all of them. (including a lot of good patch pieces ranging from floor pans, to rear floor and even a few body pieces. Not to mention a complete windshield/firewall/windshield/dash and partial floor pan that is in good shape with only minor rust. The truck is now torn down to bare frame and everything is ready to buy. Let me know what you are looking for

Complete K5 Blazer, quarters and rockers are shot. Floor pans are decent except around the doors, Good frame from what I have seen. Original 307 engine with 3 speed on the column, 56,000 original miles from what I have been told. Runs and 4wd works, so transfer case should be good. Nice uncut dash, Windshield has a little fog around the edges but windshield frame is in good shape. But there is a lot of good parts and patches on this truck. let me know quick what you need. Good double wall top, minus the hatch.

The truck is located in WV, but I will bring any part you want back to NC if you are interested and live in the Charlotte area. I can also keep parts stored until Auto Fair or Good Guys in the Spring if you pay now.

Liftgate, sunvisors and rear seat are already spoken for.

Update: Rough price list is below, I have no clue how to price this stuff, so feel free to give me feedback. Many of the prices were taken from other threads, so I know I am close.

ALSO... now parting out the chassis!

1. Under Dash Speaker: $40.00 - SOLD
2. Painted Bumpers: $100.00 for both or $50.00 each - SOLD
3. Complete Doors w/ wing glass: $100 for the pair w/out inner door panels, $130 with panels-SOLD
5. Crossmembers-
6. 6 lug rally wheels: $75.00/set
7. Hubs: -
8. Upper radiator tube with end hoses: $20.00 - SOLD
9. Front and Rear Carpet hold downs: $20.00/ pair-SOLD
10. Inside Door panels: $40.00 / pair-SOLD
11. E-Brake Cables:
12. Front Seat Belts: $40.00 / pair-SOLD

12. Front Seats -SOLD
13. Front Seat Brackets/Tracks: $85.00 -SOLD
14. Proportioning Valve “L” Bracket $15.00 - SOLD
15. Transfer Case shifter $40.00-SOLD
16. Blazer Emblems: $20.00 pair-SOLD
17. Windshield Frame: $100.00-SOLD

19. Rolling chassis: $150.00

21. Front Clip Complete: $300.00-SOLD
22. 3 speed tranny: $100.00
23. Transfer Case: $100.00 -SOLD-Pending Payment

29. Taillights: $20.00 pair

32. Rear seat bolt down plates: $30.00
33. Fuel filler neck: 45.00
34. Front drive shaft: $40.00
35. Rear drive shaft: $40.00
36. Firewall: $150.00
37. Double Wall Top- minus hatch $200.00

39. Complete 307 SBC: Runs $250.00
40. Factory AM Radio: $30.00- SOLD
41. Non A/C Dash with un-cut radio hole $90.00
42. Complete Instrument Cluster: $40.00-SOLD
43. Ashtray $20.00
44. Glove Compartment Door: $40.00-SOLD-pending payment
45. Backup lights: $10.00
46. Rear Bumper brackets: $25.00-SOLD
47. Front Bumper brackets: $25.00-SOLD
48. Radiator: $40.00-SOLD
49. Radiator Shroud: $30.00-SOLD PENDING PAYMENT

51. Marker lights: $15.00 for all four

53. Heater box with hoses: $40.00
54. Non-tilt 3 speed column: $50.00
55. Rear view mirror: $10.00
56. Rear top hold down brackets: $25.00-SOLD
57. Clutch pedal assembly: $20.00
58. Brake pedal assembly : $25.00
59. Gas pedal assembly: $15.00
60. Transmission "High" Hump: $40.00-SOLD
60. Gas tank - SOLD-pending payment

both sides available

[IMG]
[/IMG]

47thriftmaster · 12-26-2011, 06:33 PM

Jeff,
How much for the bumpers? What are the wheels like, as far as rust and what size are they? Also what shape are the hubs in? I'm about an hour east of Mooresville so would be able to pick things up if I get them, would give me a chance to check out that Burb. Thanks

47thriftmaster · 12-26-2011, 06:35 PM

May also be interested in the doors, pending pics of the ruff areas and price. I'll take all I mentioned pending pricing and pics

teeitup · 12-26-2011, 08:15 PM

Price of speaker under dash and upper radiator tube and both the little hoses on its end
Thanks Randy

**rockc** · 12-26-2011, 08:42 PM

I would be interested in front and rear carpet hold downs.

CORSAIR · 12-26-2011, 08:47 PM

Interested in door panels? let me know shiped to 89060 nevada

Thanks,
Fred

**WETOWM** · 12-26-2011, 08:50 PM

Put me 2nd in line for the upper radiator hoses & tube

gmclonghorn · 12-27-2011, 05:29 AM

Put me down 2nd for the carpet strips. Thanks
Posted via Mobile Device

rsavage · 12-27-2011, 08:20 AM

I'll be 2nd in line for the underdash radio speaker/brackets if it is an original one. Thanks, Rick.

72GMCK-2500 · 12-27-2011, 08:24 AM

Does the E-Brake still work? How are the cables? Im interested!

blazin71K5 · 12-27-2011, 09:18 AM

If the front seat belts are in useable shape how much, also would you sell the seat brackets and how much also interested in the sun visor brackets, shipping would be to 75402.
Thanks

**LUCKTRUCK** · 12-27-2011, 02:13 PM

How much for the bracket that holds the prop.valve to the booster? It's kind of an "L" shaped looking bracket.

**too much stuff** · 12-27-2011, 05:05 PM

T case knob and blazer emblems?

**Gary 70 Jimmy** · 12-27-2011, 05:12 PM

put me in line for the speaker under the dash

68panelman · 12-27-2011, 06:15 PM

Can you sell me the 2 door screws with plastic angled grommet located under the vent windows? Thanks ,mike

68lowburb · 12-27-2011, 09:43 PM

inline for rear bumper and doors pending pics and price thanks jimmy

jeffg1010 · 12-27-2011, 10:48 PM

I've posted some pricing. I will not be able to start tearing into this thing until next week, so hopefully you are not in a rush.

jeffg1010 · 12-27-2011, 11:07 PM

Quote:

Originally Posted by 47thriftmaster

Jeff,
How much for the bumpers? What are the wheels like, as far as rust and what size are they? Also what shape are the hubs in? I'm about an hour east of Mooresville so would be able to pick things up if I get them, would give me a chance to check out that Burb. Thanks

I was thinking $100.00 for both of the bumpers and $200 for both doors complete without the interior door panels. As far as the hubs and rims, I saw a few ads for the wheels showing about $100 for the set, but I would like to try to sell the rolling chassis complete... so I will let you know about them.

Quote:

Originally Posted by teeitup

Price of speaker under dash and upper radiator tube and both the little hoses on its end
Thanks Randy

How about $45 shipped. I will have to get you a better pic and confirm it's condition.

Quote:

Originally Posted by rockc

I would be interested in front and rear carpet hold downs.

I will have to make sure they are there

Quote:

Originally Posted by CORSAIR

Interested in door panels? let me know shiped to 89060 nevada

Thanks,
Fred

How about $50 shipped?

Quote:

Originally Posted by 72GMCK-2500

Does the E-Brake still work? How are the cables? Im interested!

I will check, but I would like to sell the rolling chassis complete, I will let you know.

Quote:

Originally Posted by blazin71K5

If the front seat belts are in useable shape how much, also would you sell the seat brackets and how much also interested in the sun visor brackets, shipping would be to 75402.
Thanks

I will get you pics of these and we will determine pricing from there.

Quote:

Originally Posted by LUCKTRUCK

How much for the bracket that holds the prop.valve to the booster? It's kind of an "L" shaped looking bracket.

How about $20 shipped?

Quote:

Originally Posted by too much stuff

T case knob and blazer emblems?

How about $40 shipped?

Quote:

Originally Posted by 68panelman

Can you sell me the 2 door screws with plastic angled grommet located under the vent windows? Thanks ,mike

I will see if they are there and get you a pic

47thriftmaster · 12-27-2011, 11:35 PM

I will take the bumpers, just let me know when your ready. No problem on the other stuff, just let me know. For the doors I will wait on the pictures. Would also be interested in the core support, pending pictures. If you plan to do the tear down here in NC, let me know maybe I could come help you.

Quote:

Originally Posted by jeffg1010

I was thinking $100.00 for both of the bumpers and $200 for both doors complete without the interior door panels. As far as the hubs and rims, I saw a few ads for the wheels showing about $100 for the set, but I would like to try to sell the rolling chassis complete... so I will let you know about them.

teeitup · 12-27-2011, 11:36 PM

Jeff, I'll take the upper radiator tube with both hoses for sure. I'll wait for pics of speaker and bracket. Thanks Randy

**LUCKTRUCK** · 12-28-2011, 12:28 AM

$20. sounds good for the prop. valve bracket.

I'll take it. Please send me your payment info.

**botmfedr1** · 12-28-2011, 12:30 AM

Put me first in line for Radiator shroud pending : its original for 307, and no cracks, breaks, or repairs.

shipping to 79908. please send me pics via text if possible (253-495-0880)

thanks,
Mondo

**too much stuff** · 12-28-2011, 01:51 AM

That sounds fine on the t case knob and emblems. Let me know when they are off and overall condition. Thanks, Eric

72blazr · 12-28-2011, 02:24 AM

Interested in the bolt down plates #32 pending pic. Are those prices shipped??

c1069 · 12-28-2011, 03:15 AM

its a 4 core radiator? Or?

12-26-2011, 06:07 PM	#1
jeffg1010 Registered User Join Date: Aug 2010 Location: Mooresville, NC Posts: 2,675	Parting a complete 1971 Blazer 4x4 AVAILABLE PARTS LIST -UPDATED: 02/11/12- There is a lot of photos spread throughout this thread, I added more photos below, but I have over 200 photos in a photobucket album at this link: http://s213.photobucket.com/albums/c...arts%20Blazer/ There is A LOT of good parts on this Blazer and I have tried to document all of them. (including a lot of good patch pieces ranging from floor pans, to rear floor and even a few body pieces. Not to mention a complete windshield/firewall/windshield/dash and partial floor pan that is in good shape with only minor rust. The truck is now torn down to bare frame and everything is ready to buy. Let me know what you are looking for Complete K5 Blazer, quarters and rockers are shot. Floor pans are decent except around the doors, Good frame from what I have seen. Original 307 engine with 3 speed on the column, 56,000 original miles from what I have been told. Runs and 4wd works, so transfer case should be good. Nice uncut dash, Windshield has a little fog around the edges but windshield frame is in good shape. But there is a lot of good parts and patches on this truck. let me know quick what you need. Good double wall top, minus the hatch. The truck is located in WV, but I will bring any part you want back to NC if you are interested and live in the Charlotte area. I can also keep parts stored until Auto Fair or Good Guys in the Spring if you pay now. Liftgate, sunvisors and rear seat are already spoken for. Update: Rough price list is below, I have no clue how to price this stuff, so feel free to give me feedback. Many of the prices were taken from other threads, so I know I am close. ALSO... now parting out the chassis! 1. Under Dash Speaker: $40.00 - SOLD 2. Painted Bumpers: $100.00 for both or $50.00 each - SOLD 3. Complete Doors w/ wing glass: $100 for the pair w/out inner door panels, $130 with panels-SOLD 5. Crossmembers- 6. 6 lug rally wheels: $75.00/set 7. Hubs: - 8. Upper radiator tube with end hoses: $20.00 - SOLD 9. Front and Rear Carpet hold downs: $20.00/ pair-SOLD 10. Inside Door panels: $40.00 / pair-SOLD 11. E-Brake Cables: 12. Front Seat Belts: $40.00 / pair-SOLD 12. Front Seats -SOLD 13. Front Seat Brackets/Tracks: $85.00 -SOLD 14. Proportioning Valve “L” Bracket $15.00 - SOLD 15. Transfer Case shifter $40.00-SOLD 16. Blazer Emblems: $20.00 pair-SOLD 17. Windshield Frame: $100.00-SOLD 19. Rolling chassis: $150.00 21. Front Clip Complete: $300.00-SOLD 22. 3 speed tranny: $100.00 23. Transfer Case: $100.00 -SOLD-Pending Payment 29. Taillights: $20.00 pair 32. Rear seat bolt down plates: $30.00 33. Fuel filler neck: 45.00 34. Front drive shaft: $40.00 35. Rear drive shaft: $40.00 36. Firewall: $150.00 37. Double Wall Top- minus hatch $200.00 39. Complete 307 SBC: Runs $250.00 40. Factory AM Radio: $30.00- SOLD 41. Non A/C Dash with un-cut radio hole $90.00 42. Complete Instrument Cluster: $40.00-SOLD 43. Ashtray $20.00 44. Glove Compartment Door: $40.00-SOLD-pending payment 45. Backup lights: $10.00 46. Rear Bumper brackets: $25.00-SOLD 47. Front Bumper brackets: $25.00-SOLD 48. Radiator: $40.00-SOLD 49. Radiator Shroud: $30.00-SOLD PENDING PAYMENT 51. Marker lights: $15.00 for all four 53. Heater box with hoses: $40.00 54. Non-tilt 3 speed column: $50.00 55. Rear view mirror: $10.00 56. Rear top hold down brackets: $25.00-SOLD 57. Clutch pedal assembly: $20.00 58. Brake pedal assembly : $25.00 59. Gas pedal assembly: $15.00 60. Transmission "High" Hump: $40.00-SOLD 60. Gas tank - SOLD-pending payment both sides available [IMG] [/IMG] __________________ Jeff 1972 Blazer CST 2wd- My son Sam's Project "S" Project "S" 1970 Suburban - SOLD "One Bad Burb" Photobucket Album 1986 C30 Crewcab - 63K original miles, original paint Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP... Last edited by jeffg1010; 02-11-2012 at 02:41 PM.

12-26-2011, 06:33 PM	#2
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: Parting a complete 1971 Blazer 4x4 Jeff, How much for the bumpers? What are the wheels like, as far as rust and what size are they? Also what shape are the hubs in? I'm about an hour east of Mooresville so would be able to pick things up if I get them, would give me a chance to check out that Burb. Thanks

12-26-2011, 08:15 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a complete 1971 Blazer 4x4 Price of speaker under dash and upper radiator tube and both the little hoses on its end Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-26-2011, 08:42 PM	#5
rockc Registered User Join Date: Jul 2007 Location: SE WY Posts: 633	Re: Parting a complete 1971 Blazer 4x4 I would be interested in front and rear carpet hold downs. __________________ 72 chevy 3/4 ton 4X4

12-26-2011, 08:47 PM	#6
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: Parting a complete 1971 Blazer 4x4 Interested in door panels? let me know shiped to 89060 nevada Thanks, Fred __________________ "The Can't Family Lives Across The Street"

12-26-2011, 06:35 PM	#3
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: Parting a complete 1971 Blazer 4x4 May also be interested in the doors, pending pics of the ruff areas and price. I'll take all I mentioned pending pricing and pics Last edited by 47thriftmaster; 12-26-2011 at 08:44 PM. Reason: Forgot the magic words

12-26-2011, 08:50 PM	#7
WETOWM Senior Member Join Date: Jun 2011 Location: ST LOUIS MO Posts: 2,096	Re: Parting a complete 1971 Blazer 4x4 Put me 2nd in line for the upper radiator hoses & tube

12-27-2011, 05:29 AM	#8
gmclonghorn Registered User Join Date: Mar 2011 Location: Westminster, Ca Posts: 1,104	Re: Parting a complete 1971 Blazer 4x4 Put me down 2nd for the carpet strips. Thanks Posted via Mobile Device

12-27-2011, 08:20 AM	#9
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Re: Parting a complete 1971 Blazer 4x4 I'll be 2nd in line for the underdash radio speaker/brackets if it is an original one. Thanks, Rick. __________________ 1961 C1 Corvette 1959 El Camino 350 TPI, 9" 4 w disc 69 Blazer K5 - sold July '20 2021 Durango RT 5.7

12-27-2011, 08:24 AM	#10
72GMCK-2500 Registered User Join Date: Feb 2011 Location: West Chester Pa. Posts: 195	Re: Parting a complete 1971 Blazer 4x4 Does the E-Brake still work? How are the cables? Im interested! __________________ 1947 Chev 3600, 454,th350,9"ford tubbed (Pop's ride) 1965 GMC 1000 305E V6, Powerglide. GONE 1972 GMC K-2500 350, 4 speed, 229,000 miles 1988 Chevrolet Caprice 9C1 Ex cop car, 350, 700r4. 1997 Ford F-350 4x4 XLT (The Hauler) 7.3 diesel. RUST NEVER SLEEPS

12-27-2011, 09:18 AM	#11
blazin71K5 Registered User Join Date: Aug 2009 Location: Cash,TX Posts: 285	Re: Parting a complete 1971 Blazer 4x4 If the front seat belts are in useable shape how much, also would you sell the seat brackets and how much also interested in the sun visor brackets, shipping would be to 75402. Thanks __________________ 71 2wd k5 67 Nova

12-27-2011, 02:13 PM	#12
LUCKTRUCK Senior Member Join Date: May 2007 Location: new jersey Posts: 598	Re: Parting a complete 1971 Blazer 4x4 How much for the bracket that holds the prop.valve to the booster? It's kind of an "L" shaped looking bracket. __________________ LUCKTRUCK

12-27-2011, 05:05 PM	#13
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,698	Re: Parting a complete 1971 Blazer 4x4 T case knob and blazer emblems? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-27-2011, 05:12 PM	#14
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,400	Re: Parting a complete 1971 Blazer 4x4 put me in line for the speaker under the dash __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

12-27-2011, 06:15 PM	#15
68panelman Registered User Join Date: Jan 2011 Location: Delaware and Long Island, New York Posts: 3,450	Re: Parting a complete 1971 Blazer 4x4 Can you sell me the 2 door screws with plastic angled grommet located under the vent windows? Thanks ,mike



Register or Log In To remove these advertisements.

12-27-2011, 09:43 PM	#16
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: Parting a complete 1971 Blazer 4x4 inline for rear bumper and doors pending pics and price thanks jimmy

12-27-2011, 10:48 PM	#17
jeffg1010 Registered User Join Date: Aug 2010 Location: Mooresville, NC Posts: 2,675	Re: Parting a complete 1971 Blazer 4x4 I've posted some pricing. I will not be able to start tearing into this thing until next week, so hopefully you are not in a rush. __________________ Jeff 1972 Blazer CST 2wd- My son Sam's Project "S" Project "S" 1970 Suburban - SOLD "One Bad Burb" Photobucket Album 1986 C30 Crewcab - 63K original miles, original paint Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP...

12-27-2011, 11:36 PM	#20
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a complete 1971 Blazer 4x4 Jeff, I'll take the upper radiator tube with both hoses for sure. I'll wait for pics of speaker and bracket. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-28-2011, 12:28 AM	#21
LUCKTRUCK Senior Member Join Date: May 2007 Location: new jersey Posts: 598	Re: Parting a complete 1971 Blazer 4x4 $20. sounds good for the prop. valve bracket. I'll take it. Please send me your payment info. __________________ LUCKTRUCK

12-28-2011, 12:30 AM	#22
botmfedr1 Senior Member Join Date: Feb 2008 Location: Harlingen, TX Posts: 1,098	Re: Parting a complete 1971 Blazer 4x4 Put me first in line for Radiator shroud pending : its original for 307, and no cracks, breaks, or repairs. shipping to 79908. please send me pics via text if possible (253-495-0880) thanks, Mondo

12-28-2011, 01:51 AM	#23
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,698	Re: Parting a complete 1971 Blazer 4x4 That sounds fine on the t case knob and emblems. Let me know when they are off and overall condition. Thanks, Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-28-2011, 02:24 AM	#24
72blazr Registered User Join Date: Nov 2011 Location: Houston Texas Posts: 120	Re: Parting a complete 1971 Blazer 4x4 Interested in the bolt down plates #32 pending pic. Are those prices shipped??

12-28-2011, 03:15 AM	#25
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: Parting a complete 1971 Blazer 4x4 its a 4 core radiator? Or? __________________ Pancho 69 c/10 step side 454/400 with 3.07

Register or Log In To remove these advertisements.