OK ALL MUST GO - Bodies, Sheetmetal, Hard Top & More - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 08-21-2012, 10:51 PM

interested in the 70/71 deluxe door panels
what would u need to get shipped to 08753?

Thanks
Scott

justsomeguy · 08-23-2012, 07:10 PM

Hello,

I am working on a 70 Sububan 3dr. and am looking for the metal panel that covers the area under the window behind the driver door where the fourth door would be if it were a 4dr. Its the panel that mimics the pass. side rear door panel but would only have a window crank hole in it I believe.

Thanks

MoreLoveThanMoney · 08-24-2012, 04:06 PM

Quote:

Originally Posted by ScottH

interested in the 70/71 deluxe door panels
what would u need to get shipped to 08753?

Thanks
Scott

I dont have any good door panels except for the metal ones. Sorry I cant help

MoreLoveThanMoney · 08-24-2012, 04:07 PM

Quote:

Originally Posted by justsomeguy

Hello,

I am working on a 70 Sububan 3dr. and am looking for the metal panel that covers the area under the window behind the driver door where the fourth door would be if it were a 4dr. Its the panel that mimics the pass. side rear door panel but would only have a window crank hole in it I believe.

Thanks

Im thinking I have one if not I may consider removing it from the Burban I have. I will check and let you know.

LUV2XCLR8 · 08-24-2012, 04:14 PM

Yet another request for a possible set of Blazer / Jimmy Sunvisors.

However, I just need good brackets (Rods and Visors not needed)

TRUCKRUNNER67 · 08-24-2012, 08:55 PM

how much do u want for the orange body and doors

SLH · 08-26-2012, 12:24 AM

I am looking for the headliner trim and a rear A/C unit for a suburban. Do you have of these?
Posted via Mobile Device

**my71gmc** · 08-26-2012, 09:19 AM

Hoping you have the ochre colored drivers fender. If so, can you let me know the condition. Thanks!!

**my71gmc** · 08-26-2012, 09:23 AM

Sorry - I need a fender for a Jimmy and I dont think the suburban one will work????

Bshift426 · 08-26-2012, 10:45 PM

Quote:

Originally Posted by MoreLoveThanMoney

I do have a passenger side side. Let me look at its condition and snap a couple of photos. If I remember right, it has the holes for the tire mount.

That would be wonderful. That is the side that is in the worst shape.

Thanks

TRUCKRUNNER67 · 08-27-2012, 07:08 PM

Do u have a price on the rollers
Posted via Mobile Device

MoreLoveThanMoney · 08-27-2012, 08:31 PM

Quote:

Originally Posted by LUV2XCLR8

Yet another request for a possible set of Blazer / Jimmy Sunvisors.

However, I just need good brackets (Rods and Visors not needed)

I've got a good pair. Definitely need new visors but all hardware is great. Let me know if you want them and make offer.
Posted via Mobile Device

MoreLoveThanMoney · 08-27-2012, 08:32 PM

Quote:

Originally Posted by justsomeguy

Hello,

I am working on a 70 Sububan 3dr. and am looking for the metal panel that covers the area under the window behind the driver door where the fourth door would be if it were a 4dr. Its the panel that mimics the pass. side rear door panel but would only have a window crank hole in it I believe.

Thanks

Sent you a PM but I do have what youre looking for.
Posted via Mobile Device

MoreLoveThanMoney · 08-27-2012, 08:33 PM

Quote:

Originally Posted by TRUCKRUNNER67

how much do u want for the orange body and doors

$900 with title and pretty much all the patch panels needed to fix passenger side are included.
Posted via Mobile Device

MoreLoveThanMoney · 08-27-2012, 08:35 PM

Quote:

Originally Posted by SLH

I am looking for the headliner trim and a rear A/C unit for a suburban. Do you have of these?
Posted via Mobile Device

I believe I have the trim but not the a/c unit. I can send you a photo of the trim to make sure it's what you're looking for.
Posted via Mobile Device

MoreLoveThanMoney · 08-27-2012, 08:38 PM

Quote:

Originally Posted by my71gmc

Sorry - I need a fender for a Jimmy and I dont think the suburban one will work????

I have got two drivers fenders left. Both are very nice and rust rot free. One is primered and one dark blue. Let me know.
Posted via Mobile Device

LUV2XCLR8 · 08-28-2012, 06:16 PM

Quote:

Originally Posted by MoreLoveThanMoney

I've got a good pair. Definitely need new visors but all hardware is great. Let me know if you want them and make offer.
Posted via Mobile Device

Interested, like I said I only need the pucks (No Rods or Visors)

Check shipping to 38313 and then throw me a number for them.

SLH · 08-29-2012, 12:31 AM

Yes please send pictures of the trim you have and how much shipped to 93312

Pife · 08-29-2012, 09:29 PM

Would you happen to have any front seats or brackets for a K5?

MoreLoveThanMoney · 08-30-2012, 09:04 PM

Quote:

Originally Posted by LUV2XCLR8

Interested, like I said I only need the pucks (No Rods or Visors)

Check shipping to 38313 and then throw me a number for them.

Shipping would be around $8. I have no idea what the parts are worth. You tell me what you're thinking. They need to go!

MoreLoveThanMoney · 08-30-2012, 09:05 PM

Quote:

Originally Posted by Pife

Would you happen to have any front seats or brackets for a K5?

The only front seat anything I have is bench seats. Sorry I cant be of more help.

LUV2XCLR8 · 08-31-2012, 03:11 PM

Quote:

Originally Posted by MoreLoveThanMoney

Shipping would be around $8. I have no idea what the parts are worth.
You tell me what you're thinking. They need to go!

Well since I only need the 2 pucks, $20 shipped ?

(If you can get the rods out great, if not I will)

CC

dansavo · 09-04-2012, 01:47 PM

Any chance you have rocker box reinforcement panels for a Blazer?

MoreLoveThanMoney · 09-04-2012, 09:45 PM

Quote:

Originally Posted by dansavo

Any chance you have rocker box reinforcement panels for a Blazer?

I'm sorry but I do not. I appreciate you checking though.
Posted via Mobile Device

19stepSide72 · 09-05-2012, 11:00 AM

Looking for headliner trim?
Posted via Mobile Device

08-21-2012, 10:51 PM	#51
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,185	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More interested in the 70/71 deluxe door panels what would u need to get shipped to 08753? Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon 2008 Corvette convertible

08-23-2012, 07:10 PM	#52
justsomeguy Registered User Join Date: Apr 2009 Location: Ottawa, IL Posts: 17	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Hello, I am working on a 70 Sububan 3dr. and am looking for the metal panel that covers the area under the window behind the driver door where the fourth door would be if it were a 4dr. Its the panel that mimics the pass. side rear door panel but would only have a window crank hole in it I believe. Thanks

08-24-2012, 04:14 PM	#55
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Yet another request for a possible set of Blazer / Jimmy Sunvisors. However, I just need good brackets (Rods and Visors not needed) __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

08-24-2012, 08:55 PM	#56
TRUCKRUNNER67 Registered User Join Date: Feb 2012 Location: jackson mo Posts: 32	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More how much do u want for the orange body and doors

08-26-2012, 12:24 AM	#57
SLH Registered User Join Date: Jul 2012 Location: Bakersfield CA Posts: 13	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More I am looking for the headliner trim and a rear A/C unit for a suburban. Do you have of these? Posted via Mobile Device

08-26-2012, 09:19 AM	#58
my71gmc Senior Member Join Date: Mar 2012 Location: Lake City MN Posts: 220	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Hoping you have the ochre colored drivers fender. If so, can you let me know the condition. Thanks!!

08-26-2012, 09:23 AM	#59
my71gmc Senior Member Join Date: Mar 2012 Location: Lake City MN Posts: 220	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Sorry - I need a fender for a Jimmy and I dont think the suburban one will work????

08-27-2012, 07:08 PM	#61
TRUCKRUNNER67 Registered User Join Date: Feb 2012 Location: jackson mo Posts: 32	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Do u have a price on the rollers Posted via Mobile Device

08-29-2012, 12:31 AM	#68
SLH Registered User Join Date: Jul 2012 Location: Bakersfield CA Posts: 13	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Yes please send pictures of the trim you have and how much shipped to 93312

08-29-2012, 09:29 PM	#69
Pife Registered User Join Date: Jan 2012 Location: Saint Louis Posts: 69	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Would you happen to have any front seats or brackets for a K5?

09-04-2012, 01:47 PM	#73
dansavo Registered User Join Date: Sep 2011 Location: Vancouver, WA Posts: 41	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Any chance you have rocker box reinforcement panels for a Blazer?

09-05-2012, 11:00 AM	#75
19stepSide72 wanna be 67 Join Date: May 2007 Location: Nor Cal Posts: 696	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Looking for headliner trim? Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.