CA 1971 GMC Suburban

[budnikguy]

Not a lot here....rear hatch is a pending sale. This will be a complete part out. 1/2 2wd 350/350 5 lug disc brake front, non posi rear I believe 3.08 will double check that.
Tailgate $100
GMC Super Custom 1500 emblems $50
Rear Bumper $95
Bumper Brackets $40

all prices plus shipping...ask about anything you may want also...No OE seats, no carpet retainers, no rear interior panels, no headliner

[Bgrdmoose]

I'll take the firewall plug above the throttle cable.
-Zack
Posted via Mobile Device

[budnikguy]

$6 delivered, in a padded envelope....

Originally Posted by Bgrdmoose

I'll take the firewall plug above the throttle cable.
-Zack
Posted via Mobile Device

Posted via Mobile Device

[JimH2828]

I'll take the below items if you can price the pile well.

1) Oil pressure line and firewall grommet, if it's in reusable condition.
2) Wiper switch and knob
3) Headlight switch and knob
4) Gas cap
5) Wiper transmission arms, screws, clips
6) Gauge cluster

Thanks
Jim

[JimH2828]

I'll take the below items if you can price the pile well.

1) Oil pressure line and firewall grommet, if it's in reusable condition.
2) Wiper switch and knob
3) Headlight switch and knob
4) Gas cap
5) Wiper transmission arms, screws, clips
6) Gauge cluster

Thanks
Jim

[budnikguy]

Can you explain exactly what you mean in the #5 line!? Do you need wiper motor, arms, everything? LMK...thanks

Adam

Originally Posted by JimH2828

I'll take the below items if you can price the pile well.

1) Oil pressure line and firewall grommet, if it's in reusable condition.
2) Wiper switch and knob
3) Headlight switch and knob
4) Gas cap
5) Wiper transmission arms, screws, clips
6) Gauge cluster

Thanks
Jim

[JimH2828]

5) The windshield wiper motor has a single bolt that comes through the firewall and out under the cowl, attached to it are the two wiper motor arms (about 14" long each) that and clipped onto the wiper motor bolt and then attached to the sub cowl with two screws on each wiper side. Once it comes through the sub cowl, the actual stainless steel wiper arms\blades attach to it.

Make sense?

Thanks
Jim

[budnikguy]

Got ya....I will package it all together...and could do $100 shipped on everything! LMK


Adam

Originally Posted by JimH2828

5) The windshield wiper motor has a single bolt that comes through the firewall and out under the cowl, attached to it are the two wiper motor arms (about 14" long each) that and clipped onto the wiper motor bolt and then attached to the sub cowl with two screws on each wiper side. Once it comes through the sub cowl, the actual stainless steel wiper arms\blades attach to it.

Make sense?

Thanks
Jim

[chewysask]

do you have any rear seat seatbelt brackets?

[budnikguy]

I will take a look for you....

Originally Posted by chewysask

do you have any rear seat seatbelt brackets?

[LockDoc]

Adam,

I'm looking for a rear barn door lock pawl and clip as shown in the picture below.

Thanks.
LockDoc

[Dale99]

I'm wanting to convert my doors from 72 to 71-pre style. So...
1. Door handle shafts (left and right)
2. window crank assy (left and right)
3. Horns that work?
4. Is that a tilt column? If so, how much

And what date is the california plate?

[budnikguy]

I can definitely help you with the conversion, do you need all 3/4 doors for a suburban or just the front two for a truck/blazer? Will check on a working horn...no it is not a tilt column. Plates are early to mid 70's what I believe to be correct for this truck.

Adam

Originally Posted by Dale99

I'm wanting to convert my doors from 72 to 71-pre style. So...
1. Door handle shafts (left and right)
2. window crank assy (left and right)
3. Horns that work?
4. Is that a tilt column? If so, how much

And what date is the california plate?

Posted via Mobile Device

[Number98]

Are you going to cut any patches off?

How are these areas?

[Dale99]

Originally Posted by budnikguy

I can definitely help you with the conversion, do you need all 3/4 doors for a suburban or just the front two for a truck/blazer? Will check on a working horn...no it is not a tilt column. Plates are early to mid 70's what I believe to be correct for this truck.

Adam


Posted via Mobile Device

1/2. Just the 2 doors/blazer please.
3. Thanks
4. ok, thanks
up for selling plates?

[budnikguy]

if you want it...here are pics

Originally Posted by Bgrdmoose

I'll take the firewall plug above the throttle cable.
-Zack
Posted via Mobile Device

[budnikguy]

let me take a look through my stash of parts...

Originally Posted by LockDoc

Adam,

I'm looking for a rear barn door lock pawl and clip as shown in the picture below.

Thanks.
LockDoc

[budnikguy]

Yeah, I am more than willing to do cuts for patch panels, memory serves those area are nice, I will take some detailed pics of the areas you have noted and we can go from there...Do you need the taillight section also? If so, it has been body worked.

Originally Posted by Number98

Are you going to cut any patches off?

How are these areas?

[budnikguy]

I will get them pulled tomorrow and post pics and we go from there...thanks and I will be back to you tomorrow!

Originally Posted by Dale99

1/2. Just the 2 doors/blazer please.
3. Thanks
4. ok, thanks
up for selling plates?

[Number98]

I don't really "need" the taillight sections. I might be willing to take the whole quarters if you think we might could just cut them in half (north and south) at the wheel wells then I would have the whole thing. I mainly need the sections ahead of and behind the rear wheel wells.

[LockDoc]

Originally Posted by budnikguy

let me take a look through my stash of parts...

Sounds good.

LockDoc

[Bgrdmoose]

Sorry been camping the last 5 days. I'll take it. Pm me Payment info.
-Zack
Posted via Mobile Device

[chewysask]

Did you find any rear seat seatbelt brackets?

[70sarver]

Do you have any of the oval body plugs? If so how many and much shipped to 24605?

Thanks

[Steve Cole]

How much for the middle front seat to 28041?
Posted via Mobile Device