TX hedman hedders for 67-87 C10 sbc - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67 c10 guy · 08-15-2011, 01:53 AM

Im selling a set of hedman longtube hedders w/3" collector.
They fit 67-87 C10 sbc. They do have surface rust
but should clean up fine, still very solid/no rust through

http://www.summitracing.com/parts/HED-69090/

hedman longtube hedders - $75 plus shipping
however shipping may kill the deal since the box would need to be
40x20x12 and total weight is about 25 Lbs

MYKG C10 · 09-15-2011, 10:04 PM

Hey Bro do you still have em i need for my 69

67 c10 guy · 09-16-2011, 03:43 AM

yes, i still have them.

**special-K** · 09-16-2011, 08:18 AM

What happened to the collector flanges? Were these used on a drag truck? Is there a way I could run an exhaust off of these?

67 c10 guy · 09-16-2011, 11:53 AM

I guess the po just had pipe welded to the collector.
There never was a flange since I have owned it.
But they are the exact headers listed in the summit site link
Minus the flange that po cut off and welded to
Posted via Mobile Device

08-15-2011, 01:53 AM	#1
67 c10 guy Registered User Join Date: Jan 2009 Location: 77042, Texas Posts: 102	hedman hedders for 67-87 C10 sbc Im selling a set of hedman longtube hedders w/3" collector. They fit 67-87 C10 sbc. They do have surface rust but should clean up fine, still very solid/no rust through http://www.summitracing.com/parts/HED-69090/ hedman longtube hedders - $75 plus shipping however shipping may kill the deal since the box would need to be 40x20x12 and total weight is about 25 Lbs __________________ 67 C10 longbed 350/th350 13 Ford Fusion 2.0T daily 67 lwb build sold Last edited by 67 c10 guy; 09-16-2011 at 03:43 AM.

09-15-2011, 10:04 PM	#2
MYKG C10 Registered User Join Date: Apr 2008 Location: houston Posts: 17	Re: hedman hedders for 67-87 C10 sbc Hey Bro do you still have em i need for my 69

09-16-2011, 03:43 AM	#3
67 c10 guy Registered User Join Date: Jan 2009 Location: 77042, Texas Posts: 102	Re: hedman hedders for 67-87 C10 sbc yes, i still have them. __________________ 67 C10 longbed 350/th350 13 Ford Fusion 2.0T daily 67 lwb build sold

09-16-2011, 08:18 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: hedman hedders for 67-87 C10 sbc What happened to the collector flanges? Were these used on a drag truck? Is there a way I could run an exhaust off of these? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-16-2011, 11:53 AM	#5
67 c10 guy Registered User Join Date: Jan 2009 Location: 77042, Texas Posts: 102	Re: hedman hedders for 67-87 C10 sbc I guess the po just had pipe welded to the collector. There never was a flange since I have owned it. But they are the exact headers listed in the summit site link Minus the flange that po cut off and welded to Posted via Mobile Device __________________ 67 C10 longbed 350/th350 13 Ford Fusion 2.0T daily 67 lwb build sold



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.