|
09-22-2017, 12:57 PM
|
#1 |
|
Senior Member
  
Join Date: Oct 2015
Location: Brownsburg, IN
Posts: 1,072
|
Need a Measurement
Would someone who has a stock height K10 or K1500 do a couple measurements and reply with results. I would like to know distance from the ground to bottom of both front and back center of the wheel wells. I would also need to know the height of your tires. I'm restoring a K1500 that p o had installed what I thought was a 6" lift. I didn't want the truck lifted that much, but didn't have the heart to go all the way back to stock. I bought a Tuff Country 2" set of springs, but the truck sits and looks higher than I imagined a 2" lift would look like. Thanks for any info provided.
__________________
1972 Blazer Highlander 1971 GMC K1500 SWB (sold) |
|
|
|
09-23-2017, 03:06 PM
|
#2 |
|
Senior Member
Join Date: Dec 1999
Location: Spring Valley, Ca.
Posts: 1,100
|
Re: Need a Measurement
If all else fails. Why not measure your tail gate top and bottom and add the amount of gapx2 to those dimensions? Just a thought.
__________________
Smitty '71 Short Fleetside Spring Valley, Ca. |
|
|
|
|
09-23-2017, 05:24 PM
|
#3 |
|
Senior Member
Join Date: Apr 2008
Location: Berne IN
Posts: 3,206
|
Re: Need a Measurement
May be difficult to find factory height- My K10 springs are weak & I'm sure it's lower than it was in 72. If someone installed new stock springs recently, they would be able to help you. I just bought some 2" rough country springs for my future restoration- not excited to hear they're too high
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
