AZ Parting 68 Big block burb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**t korinek** · 04-17-2010, 08:24 PM

Just got this today
All the good options were already gone

Big block power steering pump& brackets, no resevoir $110
Pullys are from a long water pump engine
Alternator brackets $65 both pieces
Front doors look good $100 each

turbo 400 $75
Big block auto linkage $75
Auto crossmember $35
All prices + shipping
Shipping doors cost about $100 each
Everything still available, going to finish scrapping this week 4/26-5/1, so let me know if you need something..... SUB IS NOW SCRAPPED 7-27-10
All parts for sale locally also
Thanks,
Tom

**t korinek** · 04-17-2010, 08:27 PM

AC also

**too much stuff** · 04-17-2010, 09:19 PM

Best price on the 2 pullies shipped please. Eric
Boy, that was a nice one in its day...

jorgensensc · 04-18-2010, 11:41 AM

Tom,
How are the headliner bow covers (plastic chrome ones) and the front carpet strip hold downs? If nice, how much shipped
to 77018?
Shawn

**t korinek** · 04-18-2010, 01:05 PM

Eric, I believe there are 3 pullys, 2 on the bottom 1 on top did you need all 3? if so $80 shipped for all 3
Jorgensensc I know the carpet strips are gone, they put custom carpet in there, I'll check the headliner chrome.
Tom

**too much stuff** · 04-18-2010, 09:19 PM

Tom, any chance you can see the part numbers on them? No dings or dents in them? Let me know when you have them off and verify the condition. Thanks, Eric

**t korinek** · 04-18-2010, 09:32 PM

too much stuff I'll take the pullys off on monday & check them out.
jorgensensc there are 3 bows & they all have chips out of them, there are also 4 chrome caps that cover the ends.

**wancosc356** · 04-18-2010, 09:37 PM

How much for the high hump?

*67/72junkie* · 04-19-2010, 08:31 AM

Hi Tom,I would like the bb bucket seat brace and seat braces under the floor if you don't mind drilling out a few spot welds.would be 1 long brace and 6 small ones.thanks Donald

**t korinek** · 04-20-2010, 12:33 AM

Eric, turns out belts didn't line up , they were long waterpump pullies

wancosc356 $65 for the high hump, no hole

67/72 Junkie If your not in a huge hurry, I'll pull them before I scrap this, prob. a couple weeks out.

**thelonerife** · 04-20-2010, 12:35 AM

Are the headlight bezels any good?

**wancosc356** · 04-20-2010, 03:12 AM

Quote:

Originally Posted by t korinek

wancosc356 $65 for the high hump, no hole

Is that the shipped or picked up price?

**t korinek** · 04-20-2010, 04:18 AM

thelonerife They are in pretty good shape $40 for the pair shipped, I can get pics if interested

wancosc356 $65 picked up $77 shipped & are you still looking for a tailgate?

mosesburb · 04-20-2010, 05:49 AM

Man, that thing is ugly. Is that a front headliner piece in there?? If so, is it any good??

Just out of morbid curiosity, WTH is in the cargo area??

*67/72junkie* · 04-20-2010, 07:38 AM

Thanks Tom,just send me a pm to remind me when you get them ready in case I don't check this thread.Thanks Donald

**wancosc356** · 04-20-2010, 12:16 PM

Quote:

Originally Posted by t korinek

wancosc356 $65 picked up $77 shipped & are you still looking for a tailgate?

Ok. If you still have it when I swing by, I'll check it out.

As for a tailgate, I have one that is pretty nice but not perfect. I may just buy an aftermarket one. Im gonna shave it anyways.

m6z · 04-20-2010, 12:23 PM

Quote:

Originally Posted by t korinek

thelonerife They are in pretty good shape $40 for the pair shipped, I can get pics if interested

wancosc356 $65 picked up $77 shipped & are you still looking for a tailgate?

If the high hump is still available. I'll take it. PM me payment info.

**t korinek** · 04-21-2010, 02:30 AM

m6z hump still available,.PM sent

mosesburb, Front headliner is the only piece there, but its in bad shape, I thought about calling you, I don't think its worth messing with. The thing in the cargo area is a fold down bed for camping, turn your rig into a camper & it folds up into a seat when you don't need it. Come & get it, I'll make you a special deal on it

wancosc356, maybe we'll see you

67/72junkie, I'll let you know when I get the parts off
Thanks,
Tom

m6z · 04-21-2010, 08:37 AM

payment sent for high hump.

**t korinek** · 04-26-2010, 11:04 PM

High hump is sold to m6z Thanks!

PortHeadlight · 04-27-2010, 07:19 AM

See there's a rear seat. ANy chance the two front hold down brackets are available? with shipping to 04107

bigdon-70blazer · 04-27-2010, 08:12 AM

Any off white seat belts still there?

JimmyFloyd · 04-27-2010, 10:33 AM

how's the body on it?

**leddzepp** · 04-27-2010, 10:42 AM

Does it still have the brackets on the intake manifold that are used to install/remove the BB engine? Thanks.

**t korinek** · 04-27-2010, 12:27 PM

ledzepp, I'll look

Jimmyfloyd body has rust, mostly around the wheel wells

Bigdon I think they are brown, I'll double check

PortHeadlight $55 shipped for the 2 seat hold downs

04-17-2010, 08:24 PM	#1
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Parting 68 Big block burb Just got this today All the good options were already gone Big block power steering pump& brackets, no resevoir $110 Pullys are from a long water pump engine Alternator brackets $65 both pieces Front doors look good $100 each turbo 400 $75 Big block auto linkage $75 Auto crossmember $35 All prices + shipping Shipping doors cost about $100 each Everything still available, going to finish scrapping this week 4/26-5/1, so let me know if you need something..... SUB IS NOW SCRAPPED 7-27-10 All parts for sale locally also Thanks, Tom Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ! Last edited by t korinek; 07-29-2010 at 03:20 AM. Reason: new info

04-17-2010, 08:27 PM	#2
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Parting 68 Big block burb AC also Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

04-17-2010, 09:19 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,710	Re: Parting 68 Big block burb Best price on the 2 pullies shipped please. Eric Boy, that was a nice one in its day... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-18-2010, 11:41 AM	#4
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: Parting 68 Big block burb Tom, How are the headliner bow covers (plastic chrome ones) and the front carpet strip hold downs? If nice, how much shipped to 77018? Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

04-18-2010, 01:05 PM	#5
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Parting 68 Big block burb Eric, I believe there are 3 pullys, 2 on the bottom 1 on top did you need all 3? if so $80 shipped for all 3 Jorgensensc I know the carpet strips are gone, they put custom carpet in there, I'll check the headliner chrome. Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

04-18-2010, 09:19 PM	#6
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,710	Re: Parting 68 Big block burb Tom, any chance you can see the part numbers on them? No dings or dents in them? Let me know when you have them off and verify the condition. Thanks, Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-18-2010, 09:32 PM	#7
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Parting 68 Big block burb too much stuff I'll take the pullys off on monday & check them out. jorgensensc there are 3 bows & they all have chips out of them, there are also 4 chrome caps that cover the ends. __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

04-18-2010, 09:37 PM	#8
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: Parting 68 Big block burb How much for the high hump? __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

04-19-2010, 08:31 AM	#9
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Re: Parting 68 Big block burb Hi Tom,I would like the bb bucket seat brace and seat braces under the floor if you don't mind drilling out a few spot welds.would be 1 long brace and 6 small ones.thanks Donald

04-20-2010, 12:33 AM	#10
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Parting 68 Big block burb Eric, turns out belts didn't line up , they were long waterpump pullies wancosc356 $65 for the high hump, no hole 67/72 Junkie If your not in a huge hurry, I'll pull them before I scrap this, prob. a couple weeks out. __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

04-20-2010, 12:35 AM	#11
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Parting 68 Big block burb Are the headlight bezels any good? __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

04-20-2010, 04:18 AM	#13
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Parting 68 Big block burb thelonerife They are in pretty good shape $40 for the pair shipped, I can get pics if interested wancosc356 $65 picked up $77 shipped & are you still looking for a tailgate? __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

04-20-2010, 05:49 AM	#14
mosesburb I had a V-8 Join Date: May 2003 Location: Phoenix AZ Posts: 1,116	Re: Parting 68 Big block burb Man, that thing is ugly. Is that a front headliner piece in there?? If so, is it any good?? Just out of morbid curiosity, WTH is in the cargo area?? __________________ 1972 K20 Suburban, 5.9L Cummins, Banks Power Pack, NV4500HD, NP205, H.A.D., D60/14FF ARB Link To Build: HERE.

04-20-2010, 07:38 AM	#15
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Re: Parting 68 Big block burb Thanks Tom,just send me a pm to remind me when you get them ready in case I don't check this thread.Thanks Donald

04-21-2010, 02:30 AM	#18
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Parting 68 Big block burb m6z hump still available,.PM sent mosesburb, Front headliner is the only piece there, but its in bad shape, I thought about calling you, I don't think its worth messing with. The thing in the cargo area is a fold down bed for camping, turn your rig into a camper & it folds up into a seat when you don't need it. Come & get it, I'll make you a special deal on it wancosc356, maybe we'll see you 67/72junkie, I'll let you know when I get the parts off Thanks, Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ! Last edited by t korinek; 04-21-2010 at 02:43 AM. Reason: more info



Register or Log In To remove these advertisements.

04-21-2010, 08:37 AM	#19
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: Parting 68 Big block burb payment sent for high hump. __________________ Doug Looking for a 67-72 short bed driver.....

04-26-2010, 11:04 PM	#20
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Parting 68 Big block burb High hump is sold to m6z Thanks! __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

04-27-2010, 07:19 AM	#21
PortHeadlight Registered User Join Date: Nov 2007 Location: Cape Elizabeth, Maine Posts: 196	Re: Parting 68 Big block burb See there's a rear seat. ANy chance the two front hold down brackets are available? with shipping to 04107

04-27-2010, 08:12 AM	#22
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,498	Re: Parting 68 Big block burb Any off white seat belts still there?

04-27-2010, 10:33 AM	#23
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Parting 68 Big block burb how's the body on it? __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

04-27-2010, 10:42 AM	#24
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,989	Re: Parting 68 Big block burb Does it still have the brackets on the intake manifold that are used to install/remove the BB engine? Thanks. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

04-27-2010, 12:27 PM	#25
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Parting 68 Big block burb ledzepp, I'll look Jimmyfloyd body has rust, mostly around the wheel wells Bigdon I think they are brown, I'll double check PortHeadlight $55 shipped for the 2 seat hold downs __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

Register or Log In To remove these advertisements.