67 long box - Page 33 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Advanced Design** · 01-16-2019, 10:12 PM

Good choice. Really sets off the engine.

cornerstone · 01-17-2019, 12:06 AM

BOOM!!! Looks amazing man!! Is that a satin black?

Metaldoc · 01-17-2019, 12:25 AM

Quote:

Originally Posted by 68bowtie

Yes! Well done.

Quote:

Originally Posted by Canuckvetter

👍🏻

Quote:

Originally Posted by Advanced Design

Good choice. Really sets off the engine.

Quote:

Originally Posted by cornerstone

BOOM!!! Looks amazing man!! Is that a satin black?

Thanks it does set off the engine and it's satin black same as all the black.

Lokin4AReason · 01-17-2019, 12:18 PM

nice progress on the build, keep those update(s) coming ...

Metaldoc · 01-18-2019, 03:41 PM

Found all the stuff I need to run door wiring and pins. I also got new tach conectors for the dizzy. One little think at a time. The aluminum block is to make door pin wedge blocks. 67 doesn't have the raised door pin boss. They don't make or sell them so..

Metaldoc · 01-19-2019, 08:22 PM

Play dough prototype made, now to find my CNC hand grinder and machine some door jam pin wedges.

Metaldoc · 01-21-2019, 08:25 PM

I had to move my machine shop to the fabrication department. With my precision craftsman 8" drill press and CNC grinder. I can make anything. Two door jam bosses for the pins done

Metaldoc · 01-22-2019, 01:44 AM

Looks ok I guess maybe painted black

Metaldoc · 01-26-2019, 05:10 PM

It's kicked out for the night for a 50th party for old guy that built my truck.

cornerstone · 01-27-2019, 12:55 AM

HA! Welcome to the half century club!

I've been a card carrying member for 7 months. Happy Birthday Derek! Make sure to stay active now that you are officially an old man... and maybe a geritol in the morning?

Orange67 · 01-27-2019, 09:56 AM

Happy birthday man! Nice work on those bosses too!

**jkeating1** · 01-27-2019, 04:52 PM

Quote:

Originally Posted by Metaldoc

Brought home a new project for my father in law, 39 chev cab, Chrysler straight 8, 2 speed power glide, 50 buick rear end, 36 Chrysler hood and sheet metal, and a custom made bed. It's a project for sure.

Any chance that you would start a thread on this project?

Metaldoc · 01-27-2019, 05:46 PM

Quote:

Originally Posted by jkeating1

Any chance that you would start a thread on this project?

I could but not sure where to post it. We haven't started yet, he's finishing up the wiring in his 62 ford pick up and the final stuff on a 36 Chrysler. By the summer the build should start.

**jkeating1** · 01-28-2019, 09:19 AM

Quote:

Originally Posted by Metaldoc

I could but not sure where to post it. We haven't started yet, he's finishing up the wiring in his 62 ford pick up and the final stuff on a 36 Chrysler. By the summer the build should start.

could go in pre-47 chevy trucks, or alternate tinkerings

Metaldoc · 02-19-2019, 12:00 AM

Got it up on the cribs and it's a lot easier to work on the door wiring. Pass. side has P/L done and interior lights. The glove box from vintage air was a little tricky to find the way it goes in but all good.

Metaldoc · 02-25-2019, 11:15 PM

Putting in power windows on the cheap. A little help from my CNC grinder again.

Metaldoc · 02-25-2019, 11:18 PM

One side ready to weld.

JustToxic · 02-27-2019, 01:53 PM

Nice work on the window motor mounts!

**Advanced Design** · 02-28-2019, 12:08 AM

Quote:

Originally Posted by JustToxic

Nice work on the window motor mounts!

X2...Impressive!

Metaldoc · 02-28-2019, 02:04 PM

Dam CNC hand grinder blew up last night. So I bought a new 4.5" with 6 axis, and locking trigger.

Metaldoc · 03-01-2019, 12:51 AM

Drivers side power window done

Metaldoc · 03-05-2019, 07:01 PM

Drivers door all working, replaced the window crank hole and rewrapped the door panel. P/L P/W checked off.

Metaldoc · 03-06-2019, 06:22 PM

Window motors were from rockauto SKP SK742142 SKP SK742143 9 tooth 1991 chevy truck. The rubber boots were from Summit
https://www.summitracing.com/parts/ELI-4301-70-011
I made a template sketch

cornerstone · 03-07-2019, 01:29 AM

Quote:

Originally Posted by Metaldoc

Window motors were from rockauto SKP SK742142 SKP SK742143 9 tooth 1991 chevy truck. The rubber boots were from Summit
https://www.summitracing.com/parts/ELI-4301-70-011
I made a template sketch

Thanks for posting the details, I'm still debating whether I want to hand crank or not. I'm so used to it in my DD and I kinda like it... but...I have been known to change my mind.

Metaldoc · 03-07-2019, 01:45 AM

Quote:

Originally Posted by cornerstone

Thanks for posting the details, I'm still debating whether I want to hand crank or not. I'm so used to it in my DD and I kinda like it... but...I have been known to change my mind.

If I was still a young 20-30 year old I would have been fine with cranks but now at 50 I want comfort

01-16-2019, 10:12 PM	#801
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,017	Re: 67 long box Good choice. Really sets off the engine. __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

01-17-2019, 12:06 AM	#802
cornerstone Registered User Join Date: Apr 2014 Location: Azle,Texas Posts: 2,248	Re: 67 long box BOOM!!! Looks amazing man!! Is that a satin black? __________________ Brian 1972 C10, "Loyd", LWB to SWB, 5.3, L83/6L80e, 4:11 Tru Trac, Air Ride, VA, DD, 20" Coys, 4 wheel disc, A quick LS swap turned into a 6 year frame off resto-mod.

01-17-2019, 12:18 PM	#804
Lokin4AReason Registered User Join Date: Oct 2014 Location: a beer can .. Posts: 924	Re: 67 long box nice progress on the build, keep those update(s) coming ... __________________ dont want to hear excuses, i want to hear solution(s)

01-18-2019, 03:41 PM	#805
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: 67 long box Found all the stuff I need to run door wiring and pins. I also got new tach conectors for the dizzy. One little think at a time. The aluminum block is to make door pin wedge blocks. 67 doesn't have the raised door pin boss. They don't make or sell them so.. Attached Images __________________ Do it, Do it right, Do it right the first time

01-19-2019, 08:22 PM	#806
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: 67 long box Play dough prototype made, now to find my CNC hand grinder and machine some door jam pin wedges. Attached Images __________________ Do it, Do it right, Do it right the first time

01-21-2019, 08:25 PM	#807
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: 67 long box I had to move my machine shop to the fabrication department. With my precision craftsman 8" drill press and CNC grinder. I can make anything. Two door jam bosses for the pins done Attached Images __________________ Do it, Do it right, Do it right the first time

01-22-2019, 01:44 AM	#808
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: 67 long box Looks ok I guess maybe painted black Attached Images __________________ Do it, Do it right, Do it right the first time

01-26-2019, 05:10 PM	#809
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: 67 long box It's kicked out for the night for a 50th party for old guy that built my truck. Attached Images __________________ Do it, Do it right, Do it right the first time

01-27-2019, 12:55 AM	#810
cornerstone Registered User Join Date: Apr 2014 Location: Azle,Texas Posts: 2,248	Re: 67 long box HA! Welcome to the half century club! I've been a card carrying member for 7 months. Happy Birthday Derek! Make sure to stay active now that you are officially an old man... and maybe a geritol in the morning? __________________ Brian 1972 C10, "Loyd", LWB to SWB, 5.3, L83/6L80e, 4:11 Tru Trac, Air Ride, VA, DD, 20" Coys, 4 wheel disc, A quick LS swap turned into a 6 year frame off resto-mod.

01-27-2019, 09:56 AM	#811
Orange67 Registered User Join Date: Mar 2013 Location: Syracuse, Utah Posts: 499	Re: 67 long box Happy birthday man! Nice work on those bosses too! __________________ Justin '67 C20 CST Custom Camper '04.5 LLY Duramax CCSB...sold

02-19-2019, 12:00 AM	#815
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: 67 long box Got it up on the cribs and it's a lot easier to work on the door wiring. Pass. side has P/L done and interior lights. The glove box from vintage air was a little tricky to find the way it goes in but all good. Attached Images __________________ Do it, Do it right, Do it right the first time

02-25-2019, 11:15 PM	#816
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: 67 long box Putting in power windows on the cheap. A little help from my CNC grinder again. Attached Images __________________ Do it, Do it right, Do it right the first time

02-25-2019, 11:18 PM	#817
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: 67 long box One side ready to weld. Attached Images __________________ Do it, Do it right, Do it right the first time

02-27-2019, 01:53 PM	#818
JustToxic Registered User Join Date: Jul 2016 Location: Elkhart, Indiana Posts: 292	Re: 67 long box Nice work on the window motor mounts! __________________ 1967 Chevy C20 to K20 Conversion "Simply Toxic" http://67-72chevytrucks.com/vboard/s...d.php?t=749409 1971 Chevy C20 Custom Camper LS Swap http://67-72chevytrucks.com/vboard/s...d.php?t=763775

02-28-2019, 02:04 PM	#820
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: 67 long box Dam CNC hand grinder blew up last night. So I bought a new 4.5" with 6 axis, and locking trigger. __________________ Do it, Do it right, Do it right the first time



Register or Log In To remove these advertisements.

03-01-2019, 12:51 AM	#821
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: 67 long box Drivers side power window done Attached Images __________________ Do it, Do it right, Do it right the first time

03-05-2019, 07:01 PM	#822
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: 67 long box Drivers door all working, replaced the window crank hole and rewrapped the door panel. P/L P/W checked off. Attached Images __________________ Do it, Do it right, Do it right the first time

03-06-2019, 06:22 PM	#823
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: 67 long box Window motors were from rockauto SKP SK742142 SKP SK742143 9 tooth 1991 chevy truck. The rubber boots were from Summit https://www.summitracing.com/parts/ELI-4301-70-011 I made a template sketch Attached Images __________________ Do it, Do it right, Do it right the first time

Register or Log In To remove these advertisements.