fusible links - The 1947 - Present Chevrolet & GMC Truck Message Board Network

prodjay10 · 07-03-2020, 11:39 PM

Working on a different vehicle where all the fusible links coming off the starter are shot. I want to replace with bladed fuses so I'm thinking of taking the battery cable to the firewall and there add a junction block and fuse block.

What I'm not sure of is how to achieve this. The battery cable has a ring terminal mid length so this is probably where I can pull power to the junction block.

Also the fuse block has the terminals that are all connected. I'm assuming it's going to be a common power coming from battery?

07-03-2020, 11:39 PM	#1
prodjay10 Registered User Join Date: Jun 2016 Location: Phoenix AZ Posts: 429	fusible links Working on a different vehicle where all the fusible links coming off the starter are shot. I want to replace with bladed fuses so I'm thinking of taking the battery cable to the firewall and there add a junction block and fuse block. What I'm not sure of is how to achieve this. The battery cable has a ring terminal mid length so this is probably where I can pull power to the junction block. Also the fuse block has the terminals that are all connected. I'm assuming it's going to be a common power coming from battery?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.