CA Parting out 84 Chevy 3/4 ton 4x4*

[chevyrestoguy]

--------------------------------------------------------------------------------

Quote:
Originally Posted by chevyrestoguy
Do you have the upper metal shroud that goes on top of the radiator and bolts to both the core support and the shroud? Mine's an '83 1/2 ton, gas engine, if that makes any difference....

Also, did you ever sell the Q-Jet?

Alex

Yes, Mine is for a 4 row radiator. I did not sell the carb yet because I'm still using it to test engines. Let me know what radiator you have and the measurement of your metal piece. Thanks, Ray

Ray-
I'll check the radiator size tomorrow and I'll let you know if I need it or not. I'm pretty certain that it's a 4-core, but I'm out of town right now and can't physically check it until tomorrow.

It sounds like you're using the carb right now, but are you going to be at a point of selling it anytime in the future?

Thanks,
Alex

[KrazyRay]

Originally Posted by chevyrestoguy

Ray-
I'll check the radiator size tomorrow and I'll let you know if I need it or not. I'm pretty certain that it's a 4-core, but I'm out of town right now and can't physically check it until tomorrow.

It sounds like you're using the carb right now, but are you going to be at a point of selling it anytime in the future?

Thanks,
Alex

Alex, I don't know for sure. My buddy thinks I should hold on to it because its hard to find a reliable carb for testing all of the engines that come through here.
Thanks, Ray

[bikes&bowties]

Does the cover look like the opening below? And from the center of the bolt holes are 5.5 inches and 4.25 inches.

[bikes&bowties]

Originally Posted by bikes&bowties

Does the cover look like the opening below? And from the center of the bolt holes are 5.5 inches and 4.25 inches.

Will the NP203 cover work? If so I'll take it. PM me