CT WTB air cleaner housing 1965 C-10 1 barrel carb

[Ironhorse]

I have a few air cleaners in the parts stash shed, will look tomorrow and see what I can come up with. Will be later in the afternoon before I can get back to you, leaving town early in the AM.

[Tripmiester]

Thanks so much!

[Ironhorse]

Tripmeister, I looked thru the parts stash shed and found one single Quadra Jet 4 BBL bottom section with no lid and a complete 2 barrel air cleaner that at some point in it's life someone had done some modification work on the air horn snout section. It had been shortened with the curved lip opening cut off. Just at a guess I would say approximately 6-7 inches had been removed. Perhaps a home made attempt to improve air flow? Unsure what the reasoning, was on a truck I parted some years ago and I tossed it aside into the parts shed. It's usable and still has a breather filter in it but has been modified somewhat as mentioned. Best I can help out for the two barrel setup.

If at all interested in the two barrel air cleaner let me know and I can get some pics posted. Maybe use it until you can find an original unmolested piece?

[Tripmiester]

Ironhorse,

Please send me some pics, I appreciate the effort.

Trip

[Ironhorse]

Tri[p, dug the 2 barrel breather housing out and took a few pics. Overall in nice shape with very minimal light surface scale, no dings or dents. As I mentioned at some point the air intake snout has been shortened for what ever reason? Perhaps better air flow maybe? Solid and very useable with the only point being the shortened air flow snout. The two barrel carb throat opening is 3'' in diameter. As is in this condition would do $15 plus shipping with no idea on shipping costs. Let me know if any further interest, this is the only complete 2 barrel breather I have.