What did you do to your truck today? Chapter II - Page 100 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bowtiguy · 12-07-2015, 12:53 PM

Got my "custom" New Vintage 1939 series gauge cluster all wired up and installed. I'm MUCH happier with the LED backlighting of these gauges vs. their perimeter bulb back lit 1940 series with curved lens.

Metaldoc · 12-07-2015, 05:44 PM

Quote:

Originally Posted by Bowtiguy

Got my "custom" New Vintage 1939 series gauge cluster all wired up and installed. I'm MUCH happier with the LED backlighting of these gauges vs. their perimeter bulb back lit 1940 series with curved lens.

Looks great! and what's that cover piece under the dash, it hides part of the E-brake handle? Is that factory or made?

kilrcady · 12-07-2015, 04:53 PM

wow really like it,$$$

kilrcady · 12-07-2015, 04:53 PM

wow really like it$$$

Bowtiguy · 12-07-2015, 05:18 PM

Quote:

Originally Posted by kilrcady

wow really like it$$$

They are actually a touch cheaper than Dakota digital VHX gauges ( which I really don't care for). Their smaller accessory gauges are much larger and easier to read in a C10.

They have several styles. Just make sure the style you like is the L.E.D. backlit Gen II.

http://www.newvintageusa.com/directfit.html

I had a long lunch so I went out for a drive. Love ColoRADo, 12/7 and I'll be driving the truck everyday this week while tweaking the suspension & EFi tune at night.

slowcpe · 12-07-2015, 05:31 PM

I like those gauges! Very nice.

Andy4639 · 12-12-2015, 09:07 PM

Installed billet E brake handle along with billet door locks!The little details!

Synestran · 12-08-2015, 06:51 PM

Put my front bumper on to replace the 2x6s that the previous owner had on the front. Looks a lot better now =]

Possmguts · 12-12-2015, 08:44 PM

Just seeing how some new shiny stuff is gonna fit..

magwakeenercew2jh · 12-12-2015, 09:01 PM

Fits good. Yum.

XwalkerX · 12-12-2015, 10:14 PM

last night i was able to check a bunch of stuff off the list...

ring and pinion
diff bearings
diff seals
Eaton LSD
axle seals
brake shoes
wheel cylinders
front and rear sway bars with poly bushings
bled brakes

still have more stuff to take care of but im happy with the progress so far

she also got her first bath today...

BlacklandCamper · 12-13-2015, 03:16 PM

Wow. Done a lot that I haven't listed.

Got the oil pump sorted, engine is back together, ditched the flex fan and mounted some electrics, replaced the mechanical fuel pump with an electric, and got my YOM plates on.

DdowC20 · 12-13-2015, 03:55 PM

I didn't do it today but earlier this week. About three weeks ago, the generator sheared a bolt and fell off my 70 C20. So, I upgraded the distributor to HEI and changed it over to an alternator. It's amazing how much better it runs. I think I need to rebuild my carburetor.
I ordered taillight buckets. The drivers side socket had come apart. Let's see, I have a rear wiring harness I got from LMC I am going to install when I get the taillight a bucket.
Now to line up the next upgrades. Always something.

88fordf150 · 12-13-2015, 06:18 PM

Started disassemble of my doors for sand blasting and skins.

88fordf150 · 12-13-2015, 06:19 PM

One more pic.

In The Ten Ring · 12-13-2015, 10:04 PM

I reasssembled the grill. *I wish I could get pics up, it looks really good.* I used the "rivet bolts" a fellow member suggested and those tightened right up.

I had to get help from dad with a punch to help align the holes for the replacement grill bracket but my old grill bracket lined right up. I hope the slight tweaking doesn't cause problems later.

I loaded up my car with all my remaining truck parts but I haven't taken those home yet.

Possmguts · 12-13-2015, 11:12 PM

Stuck the doors and a fender on it so I have something to stare at while I collect more parts... I guess I can work on alignment and seams for now... Not sure I should even bother since I think Im gonna re-skin the doors. Skins are good thats on it but the inside of the doors need attention along with bottoms..

9teen69 · 12-13-2015, 11:56 PM

That motor looks mean

Possmguts · 12-14-2015, 10:02 AM

Quote:

Originally Posted by 9teen69

That motor looks mean

Thanks.. its just a small block but revs to 6000 rpm all day long. Cant wait to get it back in and fry some tires once again.

9teen69 · 12-14-2015, 12:01 AM

Painted my wheel covers and cleaned the back side. They were pretty nasty. The SEM trim black paint is awesome, I used a small paint brush. New wheels and tires mounted also.

In The Ten Ring · 12-14-2015, 01:04 AM

Quote:

Originally Posted by 9teen69

Painted my wheel covers and cleaned the back side. They were pretty nasty. The SEM trim black paint is awesome, I used a small paint brush. New wheels and tires mounted also.

Could you park a little closer to your garage door?

I have to do with a small garage myself.

9teen69 · 12-14-2015, 08:21 PM

Quote:

Originally Posted by In The Ten Ring

Could you park a little closer to your garage door?

I have to do with a small garage myself.

When Chewy says stop I know I've cleared the door

Quote:

Originally Posted by 73737373

9teen69,

If you want those hubcaps to really "pop", get a non abrasive cleanser (Barkeeprs's Friend or Bon Ami) and a soft bristle tooth brush. Wet the brush and sprinkle a little bit on the very top of the center cap and start gently working at the grooves in the that spiral area around the Chevy emblem. Wet that area, too. Rinse w/water...you'll be amazed at how good they look.

Cool, I'll give it try, thanks for the tip!

vidman · 12-14-2015, 08:52 PM

Finally got my cab with new interior back home this weekend. Now i need to finish the wiring and install the glass and it should be good to go...

In The Ten Ring · 12-15-2015, 11:50 PM

Quote:

Originally Posted by 9teen69

When Chewy says stop I know I've cleared the door

Cool, I'll give it try, thanks for the tip!

Chewie is really good at stopping things.

*My parents have a tennis ball hanging down and I am thinking about using a laser pointer and a mark on the wall.

Possmguts · 12-14-2015, 09:59 AM

Quote:

Originally Posted by 9teen69

Painted my wheel covers and cleaned the back side. They were pretty nasty. The SEM trim black paint is awesome, I used a small paint brush. New wheels and tires mounted also.

Looks really nice bud...

12-07-2015, 12:53 PM	#1
Bowtiguy Registered User Join Date: Sep 2011 Location: Boulder Bubble Posts: 366	Re: What did you do to your truck today? Chapter II Got my "custom" New Vintage 1939 series gauge cluster all wired up and installed. I'm MUCH happier with the LED backlighting of these gauges vs. their perimeter bulb back lit 1940 series with curved lens. Attached Images

12-07-2015, 04:53 PM	#3
kilrcady Registered User Join Date: Sep 2015 Location: central NJ Posts: 102	Re: What did you do to your truck today? Chapter II wow really like it,$$$

12-07-2015, 04:53 PM	#4
kilrcady Registered User Join Date: Sep 2015 Location: central NJ Posts: 102	Re: What did you do to your truck today? Chapter II wow really like it$$$

12-07-2015, 05:31 PM	#6
slowcpe Registered User Join Date: Sep 2013 Location: Evansville, IN Posts: 1,774	Re: What did you do to your truck today? Chapter II I like those gauges! Very nice. __________________ Ryan 1967 Red Stepside..."Laymond" http://67-72chevytrucks.com/vboard/s...40#post6441840 1972 Medium Olive SWB-Chester http://67-72chevytrucks.com/vboard/s...d.php?t=759628 1967/71 Blue SWB C10..SOLD 1977 SWB K10..my grandpa's.....never should have sold

12-12-2015, 09:07 PM	#7
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: What did you do to your truck today? Chapter II Installed billet E brake handle along with billet door locks!The little details! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-08-2015, 06:51 PM	#8
Synestran Registered User Join Date: Nov 2015 Location: Oregon Posts: 88	Re: What did you do to your truck today? Chapter II Put my front bumper on to replace the 2x6s that the previous owner had on the front. Looks a lot better now =]

12-12-2015, 08:44 PM	#9
Possmguts Registered User Join Date: Nov 2014 Location: Columbiana Ohio Posts: 1,210	Re: What did you do to your truck today? Chapter II Just seeing how some new shiny stuff is gonna fit.. Attached Images __________________ "Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8

12-12-2015, 09:01 PM	#10
magwakeenercew2jh RAT1968 '68 Cab/'71 Parts Join Date: Feb 2002 Location: Coarsegold, CA Posts: 2,375	Re: What did you do to your truck today? Chapter II Fits good. Yum. __________________ M17 Coarsegold, CA RAT's shiny now. But always a rat.

12-12-2015, 10:14 PM	#11
XwalkerX Registered User Join Date: Sep 2012 Location: SoCal Posts: 529	Re: What did you do to your truck today? Chapter II last night i was able to check a bunch of stuff off the list... ring and pinion diff bearings diff seals Eaton LSD axle seals brake shoes wheel cylinders front and rear sway bars with poly bushings bled brakes still have more stuff to take care of but im happy with the progress so far she also got her first bath today...

12-13-2015, 03:16 PM	#12
BlacklandCamper Registered User Join Date: Sep 2013 Location: Farmersville, TX Posts: 238	Re: What did you do to your truck today? Chapter II Wow. Done a lot that I haven't listed. Got the oil pump sorted, engine is back together, ditched the flex fan and mounted some electrics, replaced the mechanical fuel pump with an electric, and got my YOM plates on. Attached Images __________________ Grunt: 1971 C20 Custom Camper. Runs/Drives/Kinda stops. 350Ci, TH350. 4.10:1 D60. Eight Lug LWB is more better. Hell no its not fast! Donkey: 93 Nissan D21, the farm truck. My 1/2 ton SWB. The Indomitable Datsun. 1st BN 3rd MAR. '00-'04

12-13-2015, 03:55 PM	#13
DdowC20 Registered User Join Date: May 2015 Location: Houston, MO Posts: 33	Re: What did you do to your truck today? Chapter II I didn't do it today but earlier this week. About three weeks ago, the generator sheared a bolt and fell off my 70 C20. So, I upgraded the distributor to HEI and changed it over to an alternator. It's amazing how much better it runs. I think I need to rebuild my carburetor. I ordered taillight buckets. The drivers side socket had come apart. Let's see, I have a rear wiring harness I got from LMC I am going to install when I get the taillight a bucket. Now to line up the next upgrades. Always something.

12-13-2015, 06:18 PM	#14
88fordf150 Registered User Join Date: Nov 2009 Location: Michigan Posts: 473	Re: What did you do to your truck today? Chapter II Started disassemble of my doors for sand blasting and skins. Attached Images __________________ Brad handshoe

12-13-2015, 06:19 PM	#15
88fordf150 Registered User Join Date: Nov 2009 Location: Michigan Posts: 473	Re: What did you do to your truck today? Chapter II One more pic. Attached Images __________________ Brad handshoe

12-13-2015, 10:04 PM	#16
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,421	Re: What did you do to your truck today? Chapter II I reasssembled the grill. I wish I could get pics up, it looks really good. I used the "rivet bolts" a fellow member suggested and those tightened right up. I had to get help from dad with a punch to help align the holes for the replacement grill bracket but my old grill bracket lined right up. I hope the slight tweaking doesn't cause problems later. I loaded up my car with all my remaining truck parts but I haven't taken those home yet.

12-13-2015, 11:12 PM	#17
Possmguts Registered User Join Date: Nov 2014 Location: Columbiana Ohio Posts: 1,210	Re: What did you do to your truck today? Chapter II Stuck the doors and a fender on it so I have something to stare at while I collect more parts... I guess I can work on alignment and seams for now... Not sure I should even bother since I think Im gonna re-skin the doors. Skins are good thats on it but the inside of the doors need attention along with bottoms.. Attached Images __________________ "Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8



Register or Log In To remove these advertisements.

12-13-2015, 11:56 PM	#18
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Re: What did you do to your truck today? Chapter II That motor looks mean __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

12-14-2015, 12:01 AM	#20
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Re: What did you do to your truck today? Chapter II Painted my wheel covers and cleaned the back side. They were pretty nasty. The SEM trim black paint is awesome, I used a small paint brush. New wheels and tires mounted also. Attached Images __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

12-14-2015, 08:52 PM	#23
vidman Registered User Join Date: Jun 2012 Location: Fitchburg,Mass Posts: 737	Re: What did you do to your truck today? Chapter II Finally got my cab with new interior back home this weekend. Now i need to finish the wiring and install the glass and it should be good to go... Attached Images __________________ 62 Willys 4wd Pickup : 72 C-10 swb 504 stroker 09 Taco 3" lift 33" tires: 90 K-5 blazer (plow truck): RIP Ross Little brother

Register or Log In To remove these advertisements.