Inline 250 - T3 Turbo - w/ Video - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

boucher racing · 03-17-2011, 10:22 AM

here is an updated pic of the engine bay. I had the engine rebuilt with .030 over forged pistons, Lunati turbo spec cam, new internals. I hogged out the original intake to accept a 2bbl Holley. I will be adding a HEI unit. I am really excited to fire it up soon.

DLOE65 · 03-17-2011, 10:32 AM

Thats going to be awesome!!, i should have you build me one for my 292

1Bad62Pro/Street · 03-17-2011, 10:54 AM

You can do so much with an I6!
Just look at these trucks!

YouTube - Kirby Race Truck

YouTube - Kirby 2009-Sturgis

YouTube - Sturgis Drags 6-27-09

YouTube - Blown inline six with sound

YouTube - Mighty6: See Ya

YouTube - Mighty6: DYNO RUN

YouTube - Mighty6 get's a Boost

61_FL_Apache · 03-17-2011, 11:02 AM

Awesome!!! Cant wait to see it after the rebuild.

**aerotruk63** · 03-17-2011, 06:39 PM

The members from Argentina really get into the inline 6's. They simply can't afford the V8's they say. They have a race series down there that have turbo'd sixes.

Your project is very cool, can't wait to see and hear the truck after your finished as well.

We used pistons for a 307 small block in my 250 motor. 1.94 intake and 1.88 exhaust valves. It's just a lot of fun, and more so, it's not a V8

philthethrillohio · 03-17-2011, 07:06 PM

i wanna see some numbers. i mean it looks great sounds ok but lets see the goods. quarter mile....0-60...hp...tq... please man id like to see what all your hard work has done . congrats on a great build lets see some more.

awbrown · 03-17-2011, 09:37 PM

Last week I started digging in the garage for the turbo I have been saving for my next 63 engine ....If it only makes 5-8 psi it should still make a 250 feel like a V8............maybe better...Keep us informed...

philthethrillohio · 03-17-2011, 10:32 PM

def nice, im building a 87 305 single turbo. i have long way to go but should have turbo on by fall. just not sure what software to use yet to tune. any suggestions?

boucher racing · 03-23-2011, 12:55 PM

i finished up the throttle wire cable pulley pivot system. I wanted to try to use the original gas pedal and firewall linkage. I fabbed up a bracket fastened to the carb stud with a pulley that acts as a pivot for the throttle linkage. It works well, moves smoothly, opens min. to max well with no play.

jimmydean · 03-23-2011, 01:31 PM

That's hawt. I want to turbo my 327, but this would work!

chevylookin · 04-26-2011, 12:06 AM

Nice project, I cant wait to do this to my 230 someday. Keep up the cool work!

boucher racing · 05-05-2011, 09:43 PM

I finally got a chance get a short video of the turbo attached and a short idle / rev. It sounds so much after the engine rebuild.

enjoy!

YouTube - firstturboattachrun.avi

awbrown · 05-05-2011, 09:51 PM

It will be interesting to see how much boost it makes and what it puts out HP wise .... do you have a boost retard on it ? if so who's is it ? thanks

boucher racing · 05-05-2011, 10:26 PM

I plan on locking the HEI out around the 20 degree mark. I have a AEM wideband coming, so some major tuning soon. Lockout for now. Possibly a BTM box in the future.
Posted via Mobile Device

boucher racing · 05-05-2011, 10:47 PM

I plan on locking the HEI out around the 20 degree mark. I have a AEM wideband coming, so some major tuning soon. Lockout for now. Possibly a BTM box in the future.
Posted via Mobile Device

Togart · 05-08-2011, 06:41 PM

Too sweet...I love it!

Pop's C-10 · 05-08-2011, 08:08 PM

That is cool

boucher racing · 05-25-2011, 11:08 PM

I am finally getting this thing tuned. I installed a HEI advance kit with the light weights and the strong springs. I set the timing to 12 deg and it is fully in at 25 deg. big thanks to TLOWE (inline turbocharging guru) for getting me in the right direction. I took it out and it is awesome. I have yet to push it or go WOT. I am trying to lower the boost to max out at 7psi. Here is a short vid of a drive by.

YouTube -...

Chevysdominate · 05-26-2011, 02:20 AM

Thats sounds awesome! Looking forward to seeing more.

**aerotruk63** · 05-26-2011, 06:32 AM

I'm smiling this morning after listening and watching your video! Great looking and sounding truck.

bubba327 · 05-26-2011, 08:11 PM

Are you using any vacuum advance or just initial +mechanical to have all-in at 25*?

61_FL_Apache · 05-26-2011, 08:13 PM

That thing is cool!!!

boucher racing · 05-26-2011, 08:25 PM

Quote:

Originally Posted by bubba327

Are you using any vacuum advance or just initial +mechanical to have all-in at 25*?

the total 25 degrees is : initial 12 plus 13 mechanical. I have the vacuum plugged. TLOWE has informed me to hook up the vacuum, it will help with cruising. I will mess with that later, I am having too much fun right now.

Junkpyl · 06-07-2011, 08:32 PM

Your truck is awesome! I have been tinkering with my 67 for over 2 years now and want to put a turbo on it. I have the turbo along with a clifford 4bbl intake and headers but not sure which direction to go. Your idea with the stock intake/exhaust look like a good alternative I hadn't even considered. Any updates? Keep up the great work.

Subscribed

markeb01 · 06-07-2011, 09:44 PM

First time I've seen this thread. Your truck is very cool indeed!

03-17-2011, 10:22 AM	#26
boucher racing Registered User Join Date: Feb 2009 Location: Nashville TN Posts: 294	Re: Inline 250 - T3 Turbo - w/ Video here is an updated pic of the engine bay. I had the engine rebuilt with .030 over forged pistons, Lunati turbo spec cam, new internals. I hogged out the original intake to accept a 2bbl Holley. I will be adding a HEI unit. I am really excited to fire it up soon. __________________ Build Threads: "JED" 66 GMC C1000 http://inliners.org/ubbthreads/ubbth...1857#Post61857 "Cropwell" 66 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=587639

03-17-2011, 10:32 AM	#27
DLOE65 Registered User Join Date: Nov 2009 Location: Orange, CA Posts: 525	Re: Inline 250 - T3 Turbo - w/ Video Thats going to be awesome!!, i should have you build me one for my 292

03-17-2011, 11:02 AM	#29
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,065	Re: Inline 250 - T3 Turbo - w/ Video Awesome!!! Cant wait to see it after the rebuild. __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

03-17-2011, 06:39 PM	#30
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: Inline 250 - T3 Turbo - w/ Video The members from Argentina really get into the inline 6's. They simply can't afford the V8's they say. They have a race series down there that have turbo'd sixes. Your project is very cool, can't wait to see and hear the truck after your finished as well. We used pistons for a 307 small block in my 250 motor. 1.94 intake and 1.88 exhaust valves. It's just a lot of fun, and more so, it's not a V8 __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 Last edited by aerotruk63; 03-17-2011 at 06:40 PM.

03-17-2011, 07:06 PM	#31
philthethrillohio Registered User Join Date: Feb 2011 Location: milford,oh Posts: 29	Re: Inline 250 - T3 Turbo - w/ Video i wanna see some numbers. i mean it looks great sounds ok but lets see the goods. quarter mile....0-60...hp...tq... please man id like to see what all your hard work has done . congrats on a great build lets see some more.

03-17-2011, 09:37 PM	#32
awbrown Registered User Join Date: Aug 2009 Location: Detroit MI Posts: 1,209	Re: Inline 250 - T3 Turbo - w/ Video Last week I started digging in the garage for the turbo I have been saving for my next 63 engine ....If it only makes 5-8 psi it should still make a 250 feel like a V8............maybe better...Keep us informed... Last edited by awbrown; 03-17-2011 at 09:37 PM.

03-17-2011, 10:32 PM	#33
philthethrillohio Registered User Join Date: Feb 2011 Location: milford,oh Posts: 29	Re: Inline 250 - T3 Turbo - w/ Video def nice, im building a 87 305 single turbo. i have long way to go but should have turbo on by fall. just not sure what software to use yet to tune. any suggestions?

03-23-2011, 12:55 PM	#34
boucher racing Registered User Join Date: Feb 2009 Location: Nashville TN Posts: 294	Re: Inline 250 - T3 Turbo - w/ Video i finished up the throttle wire cable pulley pivot system. I wanted to try to use the original gas pedal and firewall linkage. I fabbed up a bracket fastened to the carb stud with a pulley that acts as a pivot for the throttle linkage. It works well, moves smoothly, opens min. to max well with no play. __________________ Build Threads: "JED" 66 GMC C1000 http://inliners.org/ubbthreads/ubbth...1857#Post61857 "Cropwell" 66 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=587639

03-23-2011, 01:31 PM	#35
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Inline 250 - T3 Turbo - w/ Video That's hawt. I want to turbo my 327, but this would work! __________________ New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210

04-26-2011, 12:06 AM	#36
chevylookin Registered User Join Date: Mar 2011 Location: garden grove Posts: 175	Re: Inline 250 - T3 Turbo - w/ Video Nice project, I cant wait to do this to my 230 someday. Keep up the cool work!

05-05-2011, 09:51 PM	#38
awbrown Registered User Join Date: Aug 2009 Location: Detroit MI Posts: 1,209	Re: Inline 250 - T3 Turbo - w/ Video It will be interesting to see how much boost it makes and what it puts out HP wise .... do you have a boost retard on it ? if so who's is it ? thanks

05-05-2011, 10:26 PM	#39
boucher racing Registered User Join Date: Feb 2009 Location: Nashville TN Posts: 294	Re: Inline 250 - T3 Turbo - w/ Video I plan on locking the HEI out around the 20 degree mark. I have a AEM wideband coming, so some major tuning soon. Lockout for now. Possibly a BTM box in the future. Posted via Mobile Device __________________ Build Threads: "JED" 66 GMC C1000 http://inliners.org/ubbthreads/ubbth...1857#Post61857 "Cropwell" 66 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=587639

05-05-2011, 10:47 PM	#40
boucher racing Registered User Join Date: Feb 2009 Location: Nashville TN Posts: 294	Re: Inline 250 - T3 Turbo - w/ Video I plan on locking the HEI out around the 20 degree mark. I have a AEM wideband coming, so some major tuning soon. Lockout for now. Possibly a BTM box in the future. Posted via Mobile Device __________________ Build Threads: "JED" 66 GMC C1000 http://inliners.org/ubbthreads/ubbth...1857#Post61857 "Cropwell" 66 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=587639

05-08-2011, 06:41 PM	#41
Togart Registered User Join Date: Dec 2009 Location: Rochester, MN Posts: 43	Re: Inline 250 - T3 Turbo - w/ Video Too sweet...I love it! __________________ Togart '66 GMC 1500 '77 C-10 Scottsdale Big 10

05-08-2011, 08:08 PM	#42
Pop's C-10 Registered User Join Date: Jul 2010 Location: memphis Posts: 2,537	Re: Inline 250 - T3 Turbo - w/ Video That is cool __________________ 1981 C-10 (Pop's) 1978 Camaro 2006 Lacrosse



Register or Log In To remove these advertisements.

05-26-2011, 02:20 AM	#44
Chevysdominate Registered User Join Date: Jul 2006 Location: Springtucky, Oregon Posts: 265	Re: Inline 250 - T3 Turbo - w/ Video Thats sounds awesome! Looking forward to seeing more.

05-26-2011, 06:32 AM	#45
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: Inline 250 - T3 Turbo - w/ Video I'm smiling this morning after listening and watching your video! Great looking and sounding truck. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

05-26-2011, 08:11 PM	#46
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: Inline 250 - T3 Turbo - w/ Video Are you using any vacuum advance or just initial +mechanical to have all-in at 25*? __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

05-26-2011, 08:13 PM	#47
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,065	Re: Inline 250 - T3 Turbo - w/ Video That thing is cool!!! __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

06-07-2011, 08:32 PM	#49
Junkpyl Registered User Join Date: Jan 2007 Location: Scottsdale Arizona Posts: 125	Re: Inline 250 - T3 Turbo - w/ Video Your truck is awesome! I have been tinkering with my 67 for over 2 years now and want to put a turbo on it. I have the turbo along with a clifford 4bbl intake and headers but not sure which direction to go. Your idea with the stock intake/exhaust look like a good alternative I hadn't even considered. Any updates? Keep up the great work. Subscribed

06-07-2011, 09:44 PM	#50
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: Inline 250 - T3 Turbo - w/ Video First time I've seen this thread. Your truck is very cool indeed!

Register or Log In To remove these advertisements.