Sbc build for daily driver - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Sawlog · 06-24-2018, 10:23 PM

I'm wanting to build a 350 or 383 for my 69 c10.
It's a 60 mile round trip to work, so I would li,e decent mileage.
I have a 31-10.50 rear tire with 3.08 gears. Th400 tranny. Headers and dual exhaust.
My heads are rebuilt iron heads with 2.02, 1.88 valves 65cc chambers.
I have a 4bolt main block from the mid 70s to use for this build.
I would like to use everything I have listed if possible.
I would like to get some power out of it but still get decent mileage.
Any suggestions on a build?
Thanks
Also have a comp extreme energy flat tapped cam,
212-218 @50
447-454 lift.
Not sure if I should use this or not?

06-24-2018, 10:23 PM	#1
Sawlog Registered User Join Date: Jun 2017 Location: Central illinois Posts: 143	Sbc build for daily driver I'm wanting to build a 350 or 383 for my 69 c10. It's a 60 mile round trip to work, so I would li,e decent mileage. I have a 31-10.50 rear tire with 3.08 gears. Th400 tranny. Headers and dual exhaust. My heads are rebuilt iron heads with 2.02, 1.88 valves 65cc chambers. I have a 4bolt main block from the mid 70s to use for this build. I would like to use everything I have listed if possible. I would like to get some power out of it but still get decent mileage. Any suggestions on a build? Thanks Also have a comp extreme energy flat tapped cam, 212-218 @50 447-454 lift. Not sure if I should use this or not? Last edited by Sawlog; 06-25-2018 at 06:35 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.