NJ Single & Double wall tops in NJ $100 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

angelo_32806 · 06-15-2010, 07:50 AM

Im Sorry I never saw a price for the part with shiping. Im new to this site let me know what you need and I will get it to you
Thanks
Lee

**6t727t2** · 06-26-2010, 09:06 AM

Scooby, pc finally cut, pm sent.
Ken, I have the front section cut and have the side glass, pm if still interested
Black Betty, call me about coming to look at tops/parts 609-670-7925
Angelo, Shipping those large pieces just wouldn't be cost effective for you, check craigslist etc in your area and you'll find a top.
Savage, pm me if you still need those hatch parts

angelo_32806 · 06-28-2010, 09:23 AM

If you still have the front section I dont mind you cutting it up into smaller parts for shipping.
Let me know and I will send you a pic of what i am thinking
Thanks
Lee

best view · 07-08-2010, 09:26 PM

iam interested i pm you but no reply

VA72C10 · 07-08-2010, 11:31 PM

Do you have the piece that mounts to the window frame area that the weatherstrip goes in?

**6t727t2** · 07-09-2010, 06:52 AM

bestview, I'll get those pcs packed this weekend, for an exact shipping cost.
VA72C10, I just sold a set, will check to see if I have any others, I'm sure you know they are only used on single wall tops.

VA72C10 · 07-09-2010, 11:36 AM

Quote:

Originally Posted by 6t727t2

bestview, I'll get those pcs packed this weekend, for an exact shipping cost.
VA72C10, I just sold a set, will check to see if I have any others, I'm sure you know they are only used on single wall tops.

I actually didn't thanks...I have a double wall. the only three tops I'd seen since mine were single and all had it so I thought I'd need it too...but I guess I'm good. Thanks for the info.

BBrendal · 12-24-2010, 09:35 PM

Just wondering if you still had any patch panels for a single wall top about 16x16.

**6t727t2** · 12-29-2010, 09:08 AM

BBrendal, yes, I have a single wall top I can part. Let me know where you need the cut?

BBrendal · 12-30-2010, 12:52 AM

I need the cut approx in this area about 16in x 16in.

jaros44sr · 01-06-2011, 01:01 PM

Wtf????

4oldcars · 01-06-2011, 05:56 PM

I need latch hardware. Can you help with that? Please PM me if you can. Thanx.

robs71k5 · 02-09-2011, 01:45 AM

Hey Best view I have form and the one off part I believe your looking for already formed and ready for istallation If your intersed .Can send pics if you like

robs71k5 · 02-09-2011, 01:50 AM

OK figured out how to upload here >probably coulld run off a few if anyone interested

Name: andy's truck 046.jpg
Views: 346
Size: 31.4 KB

angelo_32806 · 02-09-2011, 01:28 PM

Quote:

Originally Posted by robs71k5

OK figured out how to upload here >probably coulld run off a few if anyone interested

Attachment 696282

what am I looking at.
Is it the front of the top

robs71k5 · 02-10-2011, 01:02 AM

Its called a "one off" its the product of a mold of the mating surface of the top of your windshied .It bolt down the same way your hard top would

angelo_32806 · 02-10-2011, 09:17 AM

do you have anything for the top of the doors
I am bulding a removeable fiberglass hard top for my 67 c10 and that peace looks like it will work very well for me
how much to ship one to 32812
Thanks
Lee

robs71k5 · 02-12-2011, 03:05 AM

I dont have anything for over doors you are correct ! but I suppose one could do a mold of the over the door section. Its time consuming but not difficult and would help if the top was off and up side down I dont think thought the piece I made would fit a truck cause they are different from blazer windshied masts . I was thinking that it would be advantageous for many to have this piece and it might be cheaper if I could take it in and have someone spray it with the chop gun a whole bunch of times.
Also were is that zip I,m in Vancouver Canada Regards Rob

angelo_32806 · 02-12-2011, 08:48 AM

I have already put a blazer windshield frame on the truck and I have an old blazer top that I was going to cut the part that bolts to the frame out of but it needs alot of work .
If I can afford your part it will save me alot of time and work
Thanks
Lee

robs71k5 · 02-12-2011, 05:13 PM

The part you are looking at is the first part off my mold and is the only part I have to date. I need to do a couple more "one off's" to be able to bring price down to make it worth my time and expense .
Also I have been waiting to see if there is interest in five or six and then I may be able to sell for under two hundred but right now for me to go out and do one at a time is pointless and unrewarding for me. This part took me over two weeks to build plus material but I now have the mold wich will cut time in half and then there is a customs border issue. I would rather have someone else go through the pain of cleaning up the mess afterwards and selling them here might put me into a different supporting catagory. Not sure how that works .
What it really needs is a group order to make it intersting and fully developed .Althoughn this part is strong enough to support a canvas top with snaps accross the windshield I would like to make it a little more stronger and had some other add ons available for it as well. Anyway just my thoughts right now but I would need about three hundred without shipping wich could quickly add up for you unless someone wanted to purchase the mold and make them on that side of the border HMMMMMM.Ideas are endless anyway keep the thoughts rolling in we might be able to generate a plan
Regards Rob

angelo_32806 · 02-12-2011, 05:33 PM

Thanks
That is more money than I want to spend
Keep me in mind if you get other orders
Lee

blazn71 · 02-28-2011, 06:57 PM

Sent you a P.M checking on side glass

69-72 · 07-12-2013, 03:04 PM

Do you still have any tops for patches? I need the area above the passenger side window including the drip rail. It is for a single wall but I just need the outer skin and the drip rail so I don't know if maybe a double wall would be the same in that area.

06-15-2010, 07:50 AM	#26
angelo_32806 Registered User Join Date: May 2009 Location: Orlando FL Posts: 107	Re: Single & Double wall tops in NJ $100 Im Sorry I never saw a price for the part with shiping. Im new to this site let me know what you need and I will get it to you Thanks Lee

06-26-2010, 09:06 AM	#27
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,430	Re: Single & Double wall tops in NJ $100 Scooby, pc finally cut, pm sent. Ken, I have the front section cut and have the side glass, pm if still interested Black Betty, call me about coming to look at tops/parts 609-670-7925 Angelo, Shipping those large pieces just wouldn't be cost effective for you, check craigslist etc in your area and you'll find a top. Savage, pm me if you still need those hatch parts Attached Images

06-28-2010, 09:23 AM	#28
angelo_32806 Registered User Join Date: May 2009 Location: Orlando FL Posts: 107	Re: Single & Double wall tops in NJ $100 If you still have the front section I dont mind you cutting it up into smaller parts for shipping. Let me know and I will send you a pic of what i am thinking Thanks Lee

07-08-2010, 09:26 PM	#29
best view Registered User Join Date: Apr 2009 Location: newbury new hampsire Posts: 1,985	Re: Single & Double wall tops in NJ $100 iam interested i pm you but no reply

07-08-2010, 11:31 PM	#30
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Single & Double wall tops in NJ $100 Do you have the piece that mounts to the window frame area that the weatherstrip goes in? __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-09-2010, 06:52 AM	#31
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,430	Re: Single & Double wall tops in NJ $100 bestview, I'll get those pcs packed this weekend, for an exact shipping cost. VA72C10, I just sold a set, will check to see if I have any others, I'm sure you know they are only used on single wall tops.

12-24-2010, 09:35 PM	#33
BBrendal Recalculating..... Join Date: Nov 2010 Location: New Lenox Il Posts: 686	Re: Single & Double wall tops in NJ $100 Just wondering if you still had any patch panels for a single wall top about 16x16.

12-29-2010, 09:08 AM	#34
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,430	Re: Single & Double wall tops in NJ $100 BBrendal, yes, I have a single wall top I can part. Let me know where you need the cut?

12-30-2010, 12:52 AM	#35
BBrendal Recalculating..... Join Date: Nov 2010 Location: New Lenox Il Posts: 686	Re: Single & Double wall tops in NJ $100 I need the cut approx in this area about 16in x 16in. __________________ Brian - (BBrendal) 1969 Chevy Camaro Z28 1972 Chevy Blazer CST 2004 GMC Yukon (The truck that pulls the car trailer) 1972 Chevy Blazer CST #2 (Finished and sold!) Blazer build link... http://s1213.photobucket.com/albums/...rendal/Blazer/

01-06-2011, 01:01 PM	#36
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,421	Re: Single & Double wall tops in NJ $100 Wtf???? __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

01-06-2011, 05:56 PM	#37
4oldcars Registered User Join Date: Jun 2004 Location: On The Beach, S C Posts: 613	Re: Single & Double wall tops in NJ $100 I need latch hardware. Can you help with that? Please PM me if you can. Thanx. __________________ 4oldcars Driving: 1971 Jimmy w/68 Chev front clip, 1953 Bel Air 2 dr hdtp, 1996 Roadmaster wagon, 2000 Eldorado The ones I let go: 1931 2 dr sedan, 1935 pick up, 1938 2 dr sedan, 1962 SS 454, 1963 409 wagon, 1970 short bed, 1972 short bed, 1972 sub, 1976 short bed, 1986 long bed, 03 short bed

02-09-2011, 01:45 AM	#38
robs71k5 K5drive Join Date: Nov 2004 Location: burnaby BC Canada Posts: 809	Re: Single & Double wall tops in NJ $100 Hey Best view I have form and the one off part I believe your looking for already formed and ready for istallation If your intersed .Can send pics if you like

02-09-2011, 01:50 AM	#39
robs71k5 K5drive Join Date: Nov 2004 Location: burnaby BC Canada Posts: 809	Re: Single & Double wall tops in NJ $100 OK figured out how to upload here >probably coulld run off a few if anyone interested

02-10-2011, 01:02 AM	#41
robs71k5 K5drive Join Date: Nov 2004 Location: burnaby BC Canada Posts: 809	Re: Single & Double wall tops in NJ $100 Its called a "one off" its the product of a mold of the mating surface of the top of your windshied .It bolt down the same way your hard top would Last edited by robs71k5; 02-10-2011 at 01:02 AM.

02-10-2011, 09:17 AM	#42
angelo_32806 Registered User Join Date: May 2009 Location: Orlando FL Posts: 107	Re: Single & Double wall tops in NJ $100 do you have anything for the top of the doors I am bulding a removeable fiberglass hard top for my 67 c10 and that peace looks like it will work very well for me how much to ship one to 32812 Thanks Lee



Register or Log In To remove these advertisements.

02-12-2011, 03:05 AM	#43
robs71k5 K5drive Join Date: Nov 2004 Location: burnaby BC Canada Posts: 809	Re: Single & Double wall tops in NJ $100 I dont have anything for over doors you are correct ! but I suppose one could do a mold of the over the door section. Its time consuming but not difficult and would help if the top was off and up side down I dont think thought the piece I made would fit a truck cause they are different from blazer windshied masts . I was thinking that it would be advantageous for many to have this piece and it might be cheaper if I could take it in and have someone spray it with the chop gun a whole bunch of times. Also were is that zip I,m in Vancouver Canada Regards Rob

02-12-2011, 08:48 AM	#44
angelo_32806 Registered User Join Date: May 2009 Location: Orlando FL Posts: 107	Re: Single & Double wall tops in NJ $100 I have already put a blazer windshield frame on the truck and I have an old blazer top that I was going to cut the part that bolts to the frame out of but it needs alot of work . If I can afford your part it will save me alot of time and work Thanks Lee

02-12-2011, 05:13 PM	#45
robs71k5 K5drive Join Date: Nov 2004 Location: burnaby BC Canada Posts: 809	Re: Single & Double wall tops in NJ $100 The part you are looking at is the first part off my mold and is the only part I have to date. I need to do a couple more "one off's" to be able to bring price down to make it worth my time and expense . Also I have been waiting to see if there is interest in five or six and then I may be able to sell for under two hundred but right now for me to go out and do one at a time is pointless and unrewarding for me. This part took me over two weeks to build plus material but I now have the mold wich will cut time in half and then there is a customs border issue. I would rather have someone else go through the pain of cleaning up the mess afterwards and selling them here might put me into a different supporting catagory. Not sure how that works . What it really needs is a group order to make it intersting and fully developed .Althoughn this part is strong enough to support a canvas top with snaps accross the windshield I would like to make it a little more stronger and had some other add ons available for it as well. Anyway just my thoughts right now but I would need about three hundred without shipping wich could quickly add up for you unless someone wanted to purchase the mold and make them on that side of the border HMMMMMM.Ideas are endless anyway keep the thoughts rolling in we might be able to generate a plan Regards Rob

02-12-2011, 05:33 PM	#46
angelo_32806 Registered User Join Date: May 2009 Location: Orlando FL Posts: 107	Re: Single & Double wall tops in NJ $100 Thanks That is more money than I want to spend Keep me in mind if you get other orders Lee

02-28-2011, 06:57 PM	#47
blazn71 Registered User Join Date: Oct 2010 Location: Enon, Ohio Posts: 46	Re: Single & Double wall tops in NJ $100 Sent you a P.M checking on side glass

07-12-2013, 03:04 PM	#48
69-72 Registered User Join Date: May 2008 Location: 204 Posts: 903	Re: Single & Double wall tops in NJ $100 Do you still have any tops for patches? I need the area above the passenger side window including the drip rail. It is for a single wall but I just need the outer skin and the drip rail so I don't know if maybe a double wall would be the same in that area. Attached Images __________________ 1969 Chevy Custom Camper 3/4 ton Rust free survivor 1972 Chevy Blazer CST 4x4 Almost Rust free survivor 1972 GMC Jimmy 2wd Undergoing surgery Last edited by 69-72; 07-16-2013 at 10:15 PM.

Register or Log In To remove these advertisements.