new to the board 65 chevy LS swap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

510hpLs · 12-01-2011, 08:46 PM

836184

65 Chevy that we have had around for a few years as a shop truck. Stand 6cyl auto 12 bolt. Nothing special tires and wheels worth more then truck at this point.

836185

836186

So the motor is out.

836187
And this is whats going in. 6.0 LS

**LostMy65** · 12-01-2011, 09:34 PM

The Engine Compartment and I6 look really clean.
Posted via Mobile Device

bryankichler · 12-01-2011, 09:48 PM

just to help out I just did the swap on mine if you use the I6 engine stands you will need to move them forward about an inch then up and out about an inch. Other than that its not a bad swap

**Captainfab** · 12-02-2011, 02:55 AM

Welcome to the forum

I'm not too far from you.

What trans are you planning on? Staying with EFI or going carb?

I have a set of motor mount adapter plates if you are in need of them.

McMurphy · 12-02-2011, 02:27 PM

Awesome, another Spokanite!!
Welcome to the board, hope to watch your progress on this project looks like a nice rig to start with!

I grew up out at the end of Long Lake, and I still own a house up on the South Hill.

12-01-2011, 08:46 PM	#1
510hpLs Registered User Join Date: Nov 2011 Location: Spokane Washington Posts: 9	new to the board 65 chevy LS swap 836184 65 Chevy that we have had around for a few years as a shop truck. Stand 6cyl auto 12 bolt. Nothing special tires and wheels worth more then truck at this point. 836185 836186 So the motor is out. 836187 And this is whats going in. 6.0 LS Attached Images

12-01-2011, 09:34 PM	#2
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,488	Re: new to the board 65 chevy LS swap The Engine Compartment and I6 look really clean. Posted via Mobile Device __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

12-01-2011, 09:48 PM	#3
bryankichler Registered User Join Date: Dec 2010 Location: Pittsburg, KS Posts: 54	Re: new to the board 65 chevy LS swap just to help out I just did the swap on mine if you use the I6 engine stands you will need to move them forward about an inch then up and out about an inch. Other than that its not a bad swap

12-02-2011, 02:55 AM	#4
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: new to the board 65 chevy LS swap Welcome to the forum I'm not too far from you. What trans are you planning on? Staying with EFI or going carb? I have a set of motor mount adapter plates if you are in need of them. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

12-02-2011, 02:27 PM	#5
McMurphy Registered User Join Date: Sep 2011 Location: Tacoma, WA Posts: 2,425	Re: new to the board 65 chevy LS swap Awesome, another Spokanite!! Welcome to the board, hope to watch your progress on this project looks like a nice rig to start with! I grew up out at the end of Long Lake, and I still own a house up on the South Hill. __________________ Michael McMurphy My 66 Stepside My 64 Tow Truck My 66 Tempest Table Of Contents Added to Page1



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.