1963 C-10 SWB BBW Fleetside in NC - Page 13 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**pimpston65** · 08-11-2014, 08:17 AM

Quote:

Originally Posted by 1963c-10

Nice stash of parts pimpston65....did you get the two rear end mounts for the overload springs?

Haven't gotten to do anything with the seat yet, but I knew it would be a few months out. I need to order some more material from SMS. I think I have enough vinyl left over to take care of the color.

Did you still need the spiral shocks I have? No problem either way, just let me know and I'll get them off this week.

yup plates are there, just not in the picture. no worries on the shocks as i have a full set of NOS ones now. im done buying parts for awhile,, im lying if something catches my eye, and i have the $$$ its on!!!

1963c-10 · 08-11-2014, 08:23 AM

Is your truck a short bed or long? I found that some minor work is required to fit the auxiliary springs on the short bed. Just a little trimming on the end of the outer bumper brackets where the mount to the frame. Think it was around 3/8" I had to trim off...but other than that they are bolt and play.

1963c-10 · 08-12-2014, 11:51 AM

Found a NOS 63 farm truck plate still in the matching original envelope today for the fleetside. These plates are very tough to find and especially in NOS. Will be a nice addition to the fleetside.

WhippinSaw · 08-12-2014, 05:22 PM

Score on the plates, very nice

TheBlueBomber · 08-13-2014, 07:47 AM

Going with stainless bolts?

1963c-10 · 08-14-2014, 10:20 PM

Yeah probably.

**TJ's Chevy** · 08-15-2014, 11:21 AM

Nice score on the plates!

1963c-10 · 08-15-2014, 11:35 AM

Quote:

Originally Posted by T.J. MCCAULEY

Nice score on the plates!

Thanks man....the farm truck plates are hard to find here in NC....especially NOS

Ta2Don · 08-15-2014, 10:31 PM

Those plates are

1963c-10 · 08-16-2014, 12:02 PM

Thanks, here some better detailed pics. Was never issued and has the matching nc dmv paper envelope. Nc lets us run year of make plates at no cost. Just have to be able to produce registered plate if asked. I keep the registered plate in the glovebox with a copy of the nc statute. Have had to show it 2x in 5 years.

1963c-10 · 08-21-2014, 09:55 PM

All interior cab prep done on the stepside and it got dark, so figured id build a vacuum gauge for the fleetside gauge cluster. Used an older pontiac vac gauge and a 60-63 delete plate
Took 20 minutes total and had the parts on hand so no extra cost
..minus decal. I will have to order a new vacuum gauge decal.

Took the needle of using two spoons apply pressure under the base of the needle on the sides. They always pop of great this way. Removed the cover of the gauge by the two tiny bolts. Took the back side of the rivet off using a small phillips head screwdriver. The back of the rivet is soft.
.maybe 7-8 turns and it'll let the delete face free. Used the old gauge as the template and drilled a 3/16" hole for the needle. Bolt the new face on & thos is where the decal will apply....but you guys get the idea. I see these vac gauges go for $20 all the time if I had to purchase one on ebay. With a delete plate, gauge & decal and maybe 20-25 minutes...it'll make a nice addition to the truck and save $200.
The gauge itself is identical to my original gauge in my stepside. The delete is the same size plate..so once redecaled it'll look oem

1963c-10 · 08-21-2014, 09:59 PM

Some more pics

1963c-10 · 08-21-2014, 10:05 PM

Last few

1963c-10 · 08-21-2014, 10:12 PM

Ill have to fix the pics tomorrow...my phones flipping pics. Will set the needle once the decals in. Put it in the cluster for now.

**TJ's Chevy** · 08-23-2014, 04:56 PM

Gauge cluster looks good!

1963c-10 · 08-23-2014, 05:27 PM

Thanks bud. Cant get to far into this build until the stepsides done, but cant help do some smaller projects

**PowerdbyChevy79** · 08-24-2014, 08:14 AM

looking good brother...

1963c-10 · 08-24-2014, 09:16 PM

Quote:

Originally Posted by PowerdbyChevy79

looking good brother...

Thanks for the kind words and for checking the build out.

**pimpston65** · 08-24-2014, 09:44 PM

Quote:

Originally Posted by 1963c-10

Thanks for the kind words and for checking the build out.

those vac gauges are going up in price, glad i snag'd mine i may just leave it and not change the face...

1963c-10 · 08-24-2014, 09:50 PM

Thats a nice gauge...I dont blame you.

1963c-10 · 08-24-2014, 09:52 PM

How will that mount to the cluster housing? I imagine the back of the housing plate will have to be modified?

**pimpston65** · 08-24-2014, 10:14 PM

Quote:

Originally Posted by 1963c-10

How will that mount to the cluster housing? I imagine the back of the housing plate will have to be modified?

i took it out the housing and it sets in there, but it was just a test, havent get too deep into it. i just add it to my to do list

**pimpston65** · 08-24-2014, 10:17 PM

Quote:

Originally Posted by pimpston65

i took it out the housing and it sets in there, but it was just a test, havent get too deep into it. i just add it to my to do list

found a sun tach for 12V 6cyl also. ima leave em with their faces kinda like the non original look. fricking repop vac and tachs are $200 apiece !!! but u already know that. paid less the $200 for both...

**pimpston65** · 08-24-2014, 10:23 PM

my latest project took me bout 30 mins to get it str. it was broke and twisted, but i got it

**pimpston65** · 08-24-2014, 10:24 PM

Quote:

Originally Posted by pimpston65

my latest project took me bout 30 mins to get it str. it was broke and twisted, but i got it

added to my to do pile

08-11-2014, 08:23 AM	#302
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1963 C-10 SWB BBW Fleetside in NC Is your truck a short bed or long? I found that some minor work is required to fit the auxiliary springs on the short bed. Just a little trimming on the end of the outer bumper brackets where the mount to the frame. Think it was around 3/8" I had to trim off...but other than that they are bolt and play. __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

08-12-2014, 11:51 AM	#303
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1963 C-10 SWB BBW Fleetside in NC Found a NOS 63 farm truck plate still in the matching original envelope today for the fleetside. These plates are very tough to find and especially in NOS. Will be a nice addition to the fleetside. Attached Images __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

08-12-2014, 05:22 PM	#304
WhippinSaw Registered User Join Date: Aug 2012 Location: Lisle Illinois Posts: 602	Re: 1963 C-10 SWB BBW Fleetside in NC Score on the plates, very nice __________________ 1963 Fleet Side cab, Converted Fleet Side Barden bumper, Step Side in the middle.

08-13-2014, 07:47 AM	#305
TheBlueBomber Registered User Join Date: Feb 2013 Location: Cary, NC Posts: 816	Re: 1963 C-10 SWB BBW Fleetside in NC Going with stainless bolts? __________________ Austin 1996 Chevrolet K1500 Silverado 1979 Chevrolet K10 Scottsdale - Carolina K10 - My 4.8L Twin turbo build - Project Short Stroke - Instagram - TheBlueBomber1996

08-14-2014, 10:20 PM	#306
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1963 C-10 SWB BBW Fleetside in NC Yeah probably. __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

08-15-2014, 11:21 AM	#307
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: 1963 C-10 SWB BBW Fleetside in NC Nice score on the plates! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

08-15-2014, 10:31 PM	#309
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: 1963 C-10 SWB BBW Fleetside in NC Those plates are __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD

08-16-2014, 12:02 PM	#310
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1963 C-10 SWB BBW Fleetside in NC Thanks, here some better detailed pics. Was never issued and has the matching nc dmv paper envelope. Nc lets us run year of make plates at no cost. Just have to be able to produce registered plate if asked. I keep the registered plate in the glovebox with a copy of the nc statute. Have had to show it 2x in 5 years. Attached Images __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

08-21-2014, 09:55 PM	#311
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1963 C-10 SWB BBW Fleetside in NC All interior cab prep done on the stepside and it got dark, so figured id build a vacuum gauge for the fleetside gauge cluster. Used an older pontiac vac gauge and a 60-63 delete plate Took 20 minutes total and had the parts on hand so no extra cost ..minus decal. I will have to order a new vacuum gauge decal. Took the needle of using two spoons apply pressure under the base of the needle on the sides. They always pop of great this way. Removed the cover of the gauge by the two tiny bolts. Took the back side of the rivet off using a small phillips head screwdriver. The back of the rivet is soft. .maybe 7-8 turns and it'll let the delete face free. Used the old gauge as the template and drilled a 3/16" hole for the needle. Bolt the new face on & thos is where the decal will apply....but you guys get the idea. I see these vac gauges go for $20 all the time if I had to purchase one on ebay. With a delete plate, gauge & decal and maybe 20-25 minutes...it'll make a nice addition to the truck and save $200. The gauge itself is identical to my original gauge in my stepside. The delete is the same size plate..so once redecaled it'll look oem Attached Images __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

08-21-2014, 09:59 PM	#312
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1963 C-10 SWB BBW Fleetside in NC Some more pics Attached Images __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

08-21-2014, 10:05 PM	#313
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1963 C-10 SWB BBW Fleetside in NC Last few Attached Images __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

08-21-2014, 10:12 PM	#314
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1963 C-10 SWB BBW Fleetside in NC Ill have to fix the pics tomorrow...my phones flipping pics. Will set the needle once the decals in. Put it in the cluster for now. __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

08-23-2014, 04:56 PM	#315
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: 1963 C-10 SWB BBW Fleetside in NC Gauge cluster looks good! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

08-23-2014, 05:27 PM	#316
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1963 C-10 SWB BBW Fleetside in NC Thanks bud. Cant get to far into this build until the stepsides done, but cant help do some smaller projects __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

08-24-2014, 08:14 AM	#317
PowerdbyChevy79 Senior Member Join Date: Apr 2013 Location: Houston,Tx Posts: 740	Re: 1963 C-10 SWB BBW Fleetside in NC looking good brother... __________________ 1966 C10 "Mary" 1972 C10 Cheyenne "Betty" https://67-72chevytrucks.com/vboard/...d.php?t=847364 1976 C35 Sierra Grande "Mr. Harvey" 1979 C10 Silverado "The BIG TEN" https://67-72chevytrucks.com/vboard/...d.php?t=841339 1982 C10 Silverado "Lucy" C10 Club Texas -HMIC



Register or Log In To remove these advertisements.

08-24-2014, 09:50 PM	#320
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1963 C-10 SWB BBW Fleetside in NC Thats a nice gauge...I dont blame you. __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

08-24-2014, 09:52 PM	#321
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1963 C-10 SWB BBW Fleetside in NC How will that mount to the cluster housing? I imagine the back of the housing plate will have to be modified? __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

08-24-2014, 10:23 PM	#324
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,189	Re: 1963 C-10 SWB BBW Fleetside in NC my latest project took me bout 30 mins to get it str. it was broke and twisted, but i got it Attached Images

Register or Log In To remove these advertisements.