Take it all 71 longbed 500 cad /425 cad - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brennecke · 05-30-2003, 01:24 PM

I have a 71 chevy longbed pickup 3/tree, 350. Standard rust , good cab corners and bed floor, new tires. The truck runs fine, but I put in a dead HEI unit and haven't gotten that fixed. THe carrier baring just went out, and that was the last straw.

I also have a 500 cad motor half pulled from a 73 eldorado and a 425 caddy motor which is sitting in the bed of the truck. Theres an eaton 3.73 posi unit in a six bolt truck axle unit sitting in the back.

I have no time to work on this project anymore. I'm sad to part with it all, but for $2500 it can all go to anyone who can pick it up.

brennecke · 05-30-2003, 01:26 PM

i have a new carrier baring in a box and a dissasembled modified Quadrajet that go with it.

brennecke · 06-09-2003, 09:54 AM

Make me an offer.
110 views and no bites. I must have over priced it or nobody lives close enough who wants to come get it.

Tracy Focht · 06-09-2003, 11:55 AM

tried to reply to your PM, but your mailbox is full...email me at tfocht@kicker.com

Tracy

Custom 68 · 06-09-2003, 12:05 PM

I also tried to PM. I am interested in just the rear end if you are going to part some of it.
Thanks

brennecke · 06-09-2003, 02:35 PM

It's all cleared out now. Sorry about that.

brennecke · 06-12-2003, 10:42 AM

$1800 takes it all, bring a trailer. I have a new doors and front fender to throw in too. This is a great project, I just won't have time.

I would consider trading for an 97 or newer import with lousy or no interior. I need to build a car to show off car audio and entertainment stuff.

brennecke · 06-16-2003, 10:17 AM

Ok. THe caddy and the cad engines are sold.
I'll go with $1200 on the truck, two doors a fender and the posi axle.

Would also trade for a newer van or suburban with good body/engine and bad interior.

brennecke · 06-20-2003, 10:14 AM

Any offers?
Come see it, It's a decent truck.

05-30-2003, 01:24 PM	#1
brennecke Registered User Join Date: Apr 2000 Location: Missouri Posts: 469	Take it all 71 longbed 500 cad /425 cad I have a 71 chevy longbed pickup 3/tree, 350. Standard rust , good cab corners and bed floor, new tires. The truck runs fine, but I put in a dead HEI unit and haven't gotten that fixed. THe carrier baring just went out, and that was the last straw. I also have a 500 cad motor half pulled from a 73 eldorado and a 425 caddy motor which is sitting in the bed of the truck. Theres an eaton 3.73 posi unit in a six bolt truck axle unit sitting in the back. I have no time to work on this project anymore. I'm sad to part with it all, but for $2500 it can all go to anyone who can pick it up. __________________ Never tire of doing what is right II Thess. 3:13 Northeast Missouri 71 LWB original 350 3/speed Soon to be 500

05-30-2003, 01:26 PM	#2
brennecke Registered User Join Date: Apr 2000 Location: Missouri Posts: 469	i have a new carrier baring in a box and a dissasembled modified Quadrajet that go with it. __________________ Never tire of doing what is right II Thess. 3:13 Northeast Missouri 71 LWB original 350 3/speed Soon to be 500

06-09-2003, 09:54 AM	#3
brennecke Registered User Join Date: Apr 2000 Location: Missouri Posts: 469	Make me an offer. 110 views and no bites. I must have over priced it or nobody lives close enough who wants to come get it. __________________ Never tire of doing what is right II Thess. 3:13 Northeast Missouri 71 LWB original 350 3/speed Soon to be 500

06-09-2003, 12:05 PM	#5
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,930	I also tried to PM. I am interested in just the rear end if you are going to part some of it. Thanks __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"

06-09-2003, 02:35 PM	#6
brennecke Registered User Join Date: Apr 2000 Location: Missouri Posts: 469	It's all cleared out now. Sorry about that. __________________ Never tire of doing what is right II Thess. 3:13 Northeast Missouri 71 LWB original 350 3/speed Soon to be 500

06-09-2003, 11:55 AM	#4
Tracy Focht Registered User Join Date: Dec 1999 Location: Stillwater, OK 74075 Posts: 2,936	tried to reply to your PM, but your mailbox is full...email me at tfocht@kicker.com Tracy

06-12-2003, 10:42 AM	#7
brennecke Registered User Join Date: Apr 2000 Location: Missouri Posts: 469	$1800 takes it all, bring a trailer. I have a new doors and front fender to throw in too. This is a great project, I just won't have time. I would consider trading for an 97 or newer import with lousy or no interior. I need to build a car to show off car audio and entertainment stuff. __________________ Never tire of doing what is right II Thess. 3:13 Northeast Missouri 71 LWB original 350 3/speed Soon to be 500

06-16-2003, 10:17 AM	#8
brennecke Registered User Join Date: Apr 2000 Location: Missouri Posts: 469	Ok. THe caddy and the cad engines are sold. I'll go with $1200 on the truck, two doors a fender and the posi axle. Would also trade for a newer van or suburban with good body/engine and bad interior. __________________ Never tire of doing what is right II Thess. 3:13 Northeast Missouri 71 LWB original 350 3/speed Soon to be 500

06-20-2003, 10:14 AM	#9
brennecke Registered User Join Date: Apr 2000 Location: Missouri Posts: 469	Any offers? Come see it, It's a decent truck. __________________ Never tire of doing what is right II Thess. 3:13 Northeast Missouri 71 LWB original 350 3/speed Soon to be 500



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.