a few pics - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bmfpeterson · 09-04-2010, 03:38 PM

thanks Cheby!

Dan Thats my baby I couldnt resist buying it its an 09 I bought brand new for 5300 out the door! I had 2 other crf's I just sold last week an 02 and an 04!
RIDE RED!

djimenzj · 09-04-2010, 03:46 PM

Black is beautiful ! Nice truck man ! I have a question, Im doing a poor mans frame off on my truck and I want to shave my firewall as well, can I still run heat and ac if I do this ?

dan468 · 09-04-2010, 03:57 PM

Quote:

Originally Posted by bmfpeterson

thanks Cheby!

Dan Thats my baby I couldnt resist buying it its an 09 I bought brand new for 5300 out the door! I had 2 other crf's I just sold last week an 02 and an 04!
RIDE RED!

Hell ya, I love the EFI. I still have flame out problems but just cranked up the idle a little...sorry for the hijack guys

bmfpeterson · 09-05-2010, 11:05 PM

vintage air has a kit that you still have to run 2 lines through the fire wall but you can put them down low??

bmfpeterson · 12-28-2010, 11:17 AM

I borrowed some wheels from my buddys truck just to see what it looks like..... what do you think 22's?

**FRENCHBLUE72** · 12-28-2010, 11:22 AM

looks good i think

**67cheby** · 12-28-2010, 11:24 AM

they look great ,i like the wheels , i prefer 20's on these trucks just my opinion

SCOTI · 12-28-2010, 11:38 AM

They look good. What size are the tires?

bmfpeterson · 12-28-2010, 12:07 PM

I like it too but im going to run 20's. they clear no problem in the back

not exact on the tire size 40 50 series? they look about 13" wide I know he said 30mm off set?

they fit the rear like a dream but the front fender would have to be cut beoynd the bolt holes for the fender well to bolt on???? if that makes sense?

these are the wheels I want to run in the back.....

kvn1011 · 01-08-2011, 02:16 PM

nice!!
those mt's will look good!!

bmfpeterson · 01-11-2011, 11:16 AM

got my carb-- alternator--- and starter in and mounted it all up.....

bmfpeterson · 01-11-2011, 11:18 AM

ordering a radiator and fuel pump today.....

**67cheby** · 01-11-2011, 11:19 AM

Looking great !!

RCbowtie69 · 01-11-2011, 04:46 PM

NICE!!!!!! looking good

mahanian · 01-11-2011, 05:43 PM

Great looking truck! A buddy of mine lives off of Knox and McQueen, looks like you might live in his neighborhood. If you don't mind a visitor I'd love to swing by and check out your truck sometime.

Dynomutt · 01-11-2011, 08:04 PM

Very nice. How are you running your wire harness through the firewall? I noticed you filled in the hole, I'm doing the same but haven't decided what to do with the harness/fuse panel.

weircc · 01-11-2011, 08:36 PM

Quote:

Originally Posted by Hart_Rod

BTDT....

yep have same problem lol

bmfpeterson · 01-12-2011, 12:04 AM

Thanks guys!
I just bolted my ignition up inside my cab behinde the glove box upside down, and I looked for the best spot for the coil wire and so I'm drilling a small hole for that wire as low as possible. Its going to end up on the bottom side of the firrwall, almost the floor? The rest of the wireing i m not real sure....... I'm running the battery inside th cab behinde the seats, so I Might just go through the floor at that point but it for sure will not be through the firewall after all that work cleaning it up! :-)

Do you have any ideas what you might do with the wireing?
Posted via Mobile Device

bmfpeterson · 02-18-2011, 01:50 PM

hung a fender for show and radiator as well...

**67cheby** · 02-18-2011, 02:56 PM

WOW man that is looking sweet

**FRENCHBLUE72** · 02-18-2011, 03:03 PM

I ran my wiring through a hole just above the tranny hump.....

bmfpeterson · 02-18-2011, 05:29 PM

Quote:

Originally Posted by 67cheby

WOW man that is looking sweet

mike

I just went through your whole build...... and well holly **** your a mad man! your truck is simply beautiful! I cant wait to see it done!

coming from you I really appreciate the complements, you have built a nice ride! this is my first project so im learning a lot!

french--- thats the same spot i was looking at going through!

**67cheby** · 02-18-2011, 05:32 PM

thanks man....i just want to get to your stage....PRETTY PAINT !!! someday maybe if i would quit changing stuff i would be there already !!

67_ShortFleet · 02-25-2011, 01:44 PM

Looks great. Any progress? What brand is the radiator? I love your signature!

bmfpeterson · 02-25-2011, 05:26 PM

I speak the truth! hahaha

The radiator is built by champion radiators. it was cheap around 300 shipped. its not the qaulity of a be cool but the price is right! says its rated for 800hp????? its a 3 core with trans cooler. it looks ok just not as clean as the be cools

been busy at work trying to get some money to buy some more parts so nothing just yet but Im on it!

09-04-2010, 03:38 PM	#76
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: a few pics thanks Cheby! Dan Thats my baby I couldnt resist buying it its an 09 I bought brand new for 5300 out the door! I had 2 other crf's I just sold last week an 02 and an 04! RIDE RED!

09-04-2010, 03:46 PM	#77
djimenzj Registered User Join Date: Mar 2009 Location: Stockton California Posts: 42	Re: a few pics Black is beautiful ! Nice truck man ! I have a question, Im doing a poor mans frame off on my truck and I want to shave my firewall as well, can I still run heat and ac if I do this ?

09-05-2010, 11:05 PM	#79
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: a few pics vintage air has a kit that you still have to run 2 lines through the fire wall but you can put them down low??

12-28-2010, 11:17 AM	#80
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: a few pics I borrowed some wheels from my buddys truck just to see what it looks like..... what do you think 22's? Attached Images

12-28-2010, 11:22 AM	#81
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: a few pics looks good i think __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-28-2010, 11:24 AM	#82
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: a few pics they look great ,i like the wheels , i prefer 20's on these trucks just my opinion __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-28-2010, 11:38 AM	#83
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,910	Re: a few pics They look good. What size are the tires? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

12-28-2010, 12:07 PM	#84
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: a few pics I like it too but im going to run 20's. they clear no problem in the back not exact on the tire size 40 50 series? they look about 13" wide I know he said 30mm off set? they fit the rear like a dream but the front fender would have to be cut beoynd the bolt holes for the fender well to bolt on???? if that makes sense? these are the wheels I want to run in the back..... Attached Images

01-08-2011, 02:16 PM	#85
kvn1011 Kvn1011 Join Date: May 2009 Location: kankakee il Posts: 560	Re: a few pics nice!! those mt's will look good!!

01-11-2011, 11:16 AM	#86
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: a few pics got my carb-- alternator--- and starter in and mounted it all up..... Attached Images

01-11-2011, 11:18 AM	#87
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: a few pics ordering a radiator and fuel pump today.....

01-11-2011, 11:19 AM	#88
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: a few pics Looking great !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-11-2011, 04:46 PM	#89
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: a few pics NICE!!!!!! looking good

01-11-2011, 05:43 PM	#90
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: a few pics Great looking truck! A buddy of mine lives off of Knox and McQueen, looks like you might live in his neighborhood. If you don't mind a visitor I'd love to swing by and check out your truck sometime.

01-11-2011, 08:04 PM	#91
Dynomutt Registered User Join Date: Mar 2009 Location: North Texas Posts: 440	Re: a few pics Very nice. How are you running your wire harness through the firewall? I noticed you filled in the hole, I'm doing the same but haven't decided what to do with the harness/fuse panel. __________________ MARQ Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=446194



Register or Log In To remove these advertisements.

01-12-2011, 12:04 AM	#93
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: a few pics Thanks guys! I just bolted my ignition up inside my cab behinde the glove box upside down, and I looked for the best spot for the coil wire and so I'm drilling a small hole for that wire as low as possible. Its going to end up on the bottom side of the firrwall, almost the floor? The rest of the wireing i m not real sure....... I'm running the battery inside th cab behinde the seats, so I Might just go through the floor at that point but it for sure will not be through the firewall after all that work cleaning it up! :-) Do you have any ideas what you might do with the wireing? Posted via Mobile Device

02-18-2011, 01:50 PM	#94
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: a few pics hung a fender for show and radiator as well... Attached Images

02-18-2011, 02:56 PM	#95
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: a few pics WOW man that is looking sweet __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-18-2011, 03:03 PM	#96
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: a few pics I ran my wiring through a hole just above the tranny hump..... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

02-18-2011, 05:32 PM	#98
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: a few pics thanks man....i just want to get to your stage....PRETTY PAINT !!! someday maybe if i would quit changing stuff i would be there already !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-25-2011, 01:44 PM	#99
67_ShortFleet Registered User Join Date: May 2008 Location: Eastern Iowa Posts: 423	Re: a few pics Looks great. Any progress? What brand is the radiator? I love your signature! __________________ Matt Garage build http://www.garagejournal.com/forum/s...ead.php?t=6784 My slow but sure truck build http://67-72chevytrucks.com/vboard/s...d.php?t=394924 My philosophy on tires is the same as cigarettes. "smoke them if you got them" HAPPILY DIVORCED!

02-25-2011, 05:26 PM	#100
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: a few pics I speak the truth! hahaha The radiator is built by champion radiators. it was cheap around 300 shipped. its not the qaulity of a be cool but the price is right! says its rated for 800hp????? its a 3 core with trans cooler. it looks ok just not as clean as the be cools been busy at work trying to get some money to buy some more parts so nothing just yet but Im on it! Last edited by bmfpeterson; 02-25-2011 at 05:38 PM.

Register or Log In To remove these advertisements.