Help!Core support - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dubb702 · 09-15-2013, 10:07 PM

Ok I'm installing the Absolute sheet metal core support and inner apron kits
The problem is that I have a custom frame so I don't have any factory
Rivets or mounts, holes ect.
What I need to know is the measurement from the front of frame to center of the first two rivets that hold the front cross member in place as shown in picture
So I can drill my holes .
Thanks
I do own the factory assembly manual but can't find measurements
Posted via Mobile Device

09-15-2013, 10:07 PM	#1
dubb702 Registered User Join Date: Sep 2010 Location: las vegas nevada Posts: 33	Help!Core support Ok I'm installing the Absolute sheet metal core support and inner apron kits The problem is that I have a custom frame so I don't have any factory Rivets or mounts, holes ect. What I need to know is the measurement from the front of frame to center of the first two rivets that hold the front cross member in place as shown in picture So I can drill my holes . Thanks I do own the factory assembly manual but can't find measurements Posted via Mobile Device Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.