Difficult to turn key in ignition lock cylinder. Key question too. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Green Monster · 07-11-2006, 09:40 AM

My ignition lock cylinder is worn. I have to push the key down to get it to turn the key once insterted. Took me months to figure this out. I used to do the wiggle wiggle wiggle everytime till it turned.

Does anyone else have this problem?

I have new keys that were given to me by the previous owner. While the keys appear to have nicer cuts on them, they do not work as well as my old worn key.

So, here is my question. If I replace the ignition lock cylinder, do I have to change out the door locks too if I want to use the same key for both the ignition and doors? Or do the doors and igition use different parts of the key?

MikeS · 07-11-2006, 12:23 PM

Easiest thing to do is just change the ignition cylinder. If you want to you can get the complete set of ignition and 2 door cylinders. Or, if your door locks work fine (actually no point in locking the doors if you've got the top off!) just do the ignition and then you'll have two keys.

tom71 · 07-11-2006, 12:32 PM

any reputable locksmith can rekey the doors to your new ignition key , its cheaper if you pull the locks out of the blazer and bring them to the locksmith

Pop's72 · 07-11-2006, 01:59 PM

When I bought my Blazer I didn't want any keys floating around for my truck, so I bought new key set from Early Classic that consisted of a 2 door keys, 1 ignition key, and 1 glovebox key for about $50. I believe that Brothers now has the similar key kit available, but I am not sure on the price. My back hatch lock and key is still the same as it didn't match my previous keys and dealing with it is a pain in the...

Just be careful that when you remove the door locks you don't take any paint with you.

Green Monster · 07-11-2006, 07:29 PM

I know the top is off, but I really like having the truck the way it was from the factory, one key does it all. Now, if any reputable locksmith can rekey the doors, will he be able to rekey my hatch too? If not, is there any kits with a hatch lock included?

69TowRig · 07-12-2006, 09:50 AM

No kits with hatch locks that I know of. I bought a 3-piece lock kit (both doors and ignition) for $25 from GMC Pauls. The 4-piece with glovebox lock is $40. The closest to OEM look aftermarket hatch handle I can find you can buy at Northern Tool & Equip, but the keys are a completely different style.

cdowns · 07-12-2006, 09:53 AM

ever think about spraying some lubricant in the lock cylinders to make them work easier??

meathead95 · 07-12-2006, 11:46 AM

i had the exact same problem having to wiggle my key to get it to start so i went to the lock smith and he made me a new key for free (he liked my blazer) and i have no problems at all now

Green Monster · 07-12-2006, 12:15 PM

Quote:

Originally Posted by meathead95

i had the exact same problem having to wiggle my key to get it to start so i went to the lock smith and he made me a new key for free (he liked my blazer) and i have no problems at all now

I have new keys, but they are even worse. Maybe I'll try again. I'll try the lubricant trick too.

07-11-2006, 09:40 AM	#1
Green Monster Registered User Join Date: Mar 2006 Location: Malvern, PA Posts: 951	Difficult to turn key in ignition lock cylinder. Key question too. My ignition lock cylinder is worn. I have to push the key down to get it to turn the key once insterted. Took me months to figure this out. I used to do the wiggle wiggle wiggle everytime till it turned. Does anyone else have this problem? I have new keys that were given to me by the previous owner. While the keys appear to have nicer cuts on them, they do not work as well as my old worn key. So, here is my question. If I replace the ignition lock cylinder, do I have to change out the door locks too if I want to use the same key for both the ignition and doors? Or do the doors and igition use different parts of the key? __________________ Photo Gallery of 1972 K/5 Blazer CST

07-11-2006, 12:23 PM	#2
MikeS Active Member Join Date: Jun 2000 Location: Pottstown, PA Posts: 197	Re: Difficult to turn key in ignition lock cylinder. Key question too. Easiest thing to do is just change the ignition cylinder. If you want to you can get the complete set of ignition and 2 door cylinders. Or, if your door locks work fine (actually no point in locking the doors if you've got the top off!) just do the ignition and then you'll have two keys. __________________ The rides: '72 Blazer 350/4spd/Tuned Port Injection '69 Firebird 400/4 speed 2001 Dodge Dakota Sport 4X4/4.7L V8/5 spd/Headers/Jet Chip, etc. Daily Driver 2002 Airborne Zeppelin (roadbike) Titanium frame/Campy Chorus 2004 Filippi Italia S (rowing shell)

07-11-2006, 12:32 PM	#3
tom71 what happened to flint mi Join Date: Oct 2005 Location: san diego Posts: 437	Re: Difficult to turn key in ignition lock cylinder. Key question too. any reputable locksmith can rekey the doors to your new ignition key , its cheaper if you pull the locks out of the blazer and bring them to the locksmith __________________ 71 swb 2wd fleet frame off in progress 72 4x4 blazer daily driver 70 olds cutlass s mint condition owned by a grandma 56 gmc 2wd project waitng 97 fiance mobile

07-11-2006, 01:59 PM	#4
Pop's72 It's ok to stare... Join Date: Dec 2004 Location: San Jose, CA Posts: 669	Re: Difficult to turn key in ignition lock cylinder. Key question too. When I bought my Blazer I didn't want any keys floating around for my truck, so I bought new key set from Early Classic that consisted of a 2 door keys, 1 ignition key, and 1 glovebox key for about $50. I believe that Brothers now has the similar key kit available, but I am not sure on the price. My back hatch lock and key is still the same as it didn't match my previous keys and dealing with it is a pain in the... Just be careful that when you remove the door locks you don't take any paint with you. __________________ -Matt 1971 Blazer/Jimmy : Factory 2WD, Factory AC, Crate 350

07-11-2006, 07:29 PM	#5
Green Monster Registered User Join Date: Mar 2006 Location: Malvern, PA Posts: 951	Re: Difficult to turn key in ignition lock cylinder. Key question too. I know the top is off, but I really like having the truck the way it was from the factory, one key does it all. Now, if any reputable locksmith can rekey the doors, will he be able to rekey my hatch too? If not, is there any kits with a hatch lock included? __________________ Photo Gallery of 1972 K/5 Blazer CST Last edited by Green Monster; 07-11-2006 at 07:30 PM.

07-12-2006, 09:50 AM	#6
69TowRig Senior Member Join Date: Jan 2005 Location: Raleigh, NC Posts: 894	Re: Difficult to turn key in ignition lock cylinder. Key question too. No kits with hatch locks that I know of. I bought a 3-piece lock kit (both doors and ignition) for $25 from GMC Pauls. The 4-piece with glovebox lock is $40. The closest to OEM look aftermarket hatch handle I can find you can buy at Northern Tool & Equip, but the keys are a completely different style. __________________ -Chris Building a stripper, one part at a time: 1969 K5, 307, 3spd, 3 seats, hard top. Added Pwr Discs, Pwr Steering, Aux Battery, T-case Skid, Lighted Sidemarkers, HEI, Lock-Right Diff, ECE Class IV Hitch, 32" MT/Rs. Parts to Install: Hand Throttle, Console, Tow Hooks, Dual Horns, AM-FM, Dealer Swing-Away Tire Carrier, Gas Tank Skid. Also building a 1950 Willys CJ-3A and off-roading a 2001 Nissan Frontier on 1-Ton Portals...

07-12-2006, 09:53 AM	#7
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Difficult to turn key in ignition lock cylinder. Key question too. ever think about spraying some lubricant in the lock cylinders to make them work easier?? __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

07-12-2006, 11:46 AM	#8
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: Difficult to turn key in ignition lock cylinder. Key question too. i had the exact same problem having to wiggle my key to get it to start so i went to the lock smith and he made me a new key for free (he liked my blazer) and i have no problems at all now __________________ 72 2wd blazer 72 swb 4x4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.