The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-11-2015, 12:40 AM   #151
rudyyloverboiii
Registered User
 
Join Date: Nov 2014
Location: IE California
Posts: 225
Re: The 60-66 "PAYING IT FORWARD" thread!

Isaiah92260 I have a wiring harness from my 64 if u want it. I'm in riverside.
rudyyloverboiii is offline   Reply With Quote
Old 09-11-2015, 12:49 AM   #152
rudyyloverboiii
Registered User
 
Join Date: Nov 2014
Location: IE California
Posts: 225
Re: The 60-66 "PAYING IT FORWARD" thread!

I also have the west coast mirrors That are a little worn down and a manual steering box that might need a new bearing. (Has play)
rudyyloverboiii is offline   Reply With Quote
Old 09-11-2015, 07:40 AM   #153
57chevy406
Registered User
 
Join Date: Jan 2009
Location: Edgewater FL
Posts: 19
Re: The 60-66 "PAYING IT FORWARD" thread!

Quote:
Originally Posted by 57chevy406 View Post
Free 1961 gas tank with sending unit. Took out of my truck when I moved tank to rear under bed. No leaks sender works good has minor surface rust as it has been setting outside. Must pickup cannot ship.
Tank is gone. Went to Bill in Daytona
57chevy406 is offline   Reply With Quote
Old 09-11-2015, 09:20 PM   #154
slepysal
Registered User
 
slepysal's Avatar
 
Join Date: Oct 2006
Location: San Jose NOR*CAL
Posts: 3,077
Re: The 60-66 "PAYING IT FORWARD" thread!

the windshield went to Josh jteck10.
__________________
1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes.

"Over, Around or through it... "
slepysal is offline   Reply With Quote
Old 09-12-2015, 11:31 PM   #155
jwcardy
Registered User
 
Join Date: Jan 2008
Location: Omaha, Nebraska
Posts: 116
Re: The 60-66 "PAYING IT FORWARD" thread!

Quote:
Originally Posted by rudyyloverboiii View Post
I also have the west coast mirrors That are a little worn down and a manual steering box that might need a new bearing. (Has play)
Pics of the mirrors?
jwcardy is offline   Reply With Quote
Old 09-14-2015, 02:06 PM   #156
Fogrocker
Registered User
 
Join Date: Sep 2015
Location: Snohomish, Wa
Posts: 17
Re: The 60-66 "PAYING IT FORWARD" thread!

>>>>

I don't have any pictures to post at this time, but while I'm thinking about it...I just did a front disc brake swap/lowering job on my 63 C10. I have all 4 factory coil springs along with the stock front spindles that are assembled with decent drum brakes. Very useable if someone has the need. Obviously too heavy to ship, but they are free if someone can use them. I'll haul them off to the scrap metal yard in a week or two.

Jerry


Did you get rid of these?
If not I could use them.
Fogrocker is offline   Reply With Quote
Old 09-14-2015, 02:19 PM   #157
Fogrocker
Registered User
 
Join Date: Sep 2015
Location: Snohomish, Wa
Posts: 17
Re: The 60-66 "PAYING IT FORWARD" thread!

Quote:
Originally Posted by Crazy Rusty View Post
Could this thread be stickied?

I have the original dash cluster for a 62 (fuel gauge, warning lights) with the cluster harness if anyone wants them.
Long shot I know... still got them?
Fogrocker is offline   Reply With Quote
Old 09-16-2015, 06:57 PM   #158
jteck10
Registered User
 
jteck10's Avatar
 
Join Date: Aug 2015
Location: Bay Area, CA
Posts: 94
Re: The 60-66 "PAYING IT FORWARD" thread!

Quote:
Originally Posted by slepysal View Post
the windshield went to Josh jteck10.
thanks again sal! putting it in hopefully this week
__________________
1962 GMC 2500 3/4 ton longbed stepside (currently w/flatbed), 4 on the floor, 305-V6-5.0L
jteck10 is offline   Reply With Quote
Old 09-16-2015, 08:04 PM   #159
Isaiah92260
Registered User
 
Isaiah92260's Avatar
 
Join Date: Jul 2015
Location: Whittier, CA
Posts: 851
Re: The 60-66 "PAYING IT FORWARD" thread!

Quote:
Originally Posted by rudyyloverboiii View Post
Isaiah92260 I have a wiring harness from my 64 if u want it. I'm in riverside.
Just sent you a PM!
Isaiah92260 is offline   Reply With Quote
Old 09-18-2015, 06:19 PM   #160
LostMy65
But Found Her 25yrs Later!
 
LostMy65's Avatar
 
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,457
Re: The 60-66 "PAYING IT FORWARD" thread!

Free
- Local - Oregon City
6 - Dually Wheels with nice tires. 8 Lug. 16.5 Dia.
__________________
I lost my 65 - Found it 25 years later:
http://67-72chevytrucks.com/vboard/s...d.php?t=426650

66 C20 Service Truck:
http://67-72chevytrucks.com/vboard/s...d.php?t=428035

Last edited by LostMy65; 09-18-2015 at 06:31 PM.
LostMy65 is offline   Reply With Quote
Old 09-18-2015, 06:34 PM   #161
LostMy65
But Found Her 25yrs Later!
 
LostMy65's Avatar
 
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,457
Re: The 60-66 "PAYING IT FORWARD" thread!

Quote:
Originally Posted by LostMy65 View Post
SM465 - Supposedly recently rebuilt.
Come get it.
Oregon City
__________________
I lost my 65 - Found it 25 years later:
http://67-72chevytrucks.com/vboard/s...d.php?t=426650

66 C20 Service Truck:
http://67-72chevytrucks.com/vboard/s...d.php?t=428035
LostMy65 is offline   Reply With Quote
Old 09-19-2015, 02:00 PM   #162
jteck10
Registered User
 
jteck10's Avatar
 
Join Date: Aug 2015
Location: Bay Area, CA
Posts: 94
Re: The 60-66 "PAYING IT FORWARD" thread!

Quote:
Originally Posted by LostMy65 View Post
Free
- Local - Oregon City
6 - Dually Wheels with nice tires. 8 Lug. 16.5 Dia.
shipping an option if i pay?
__________________
1962 GMC 2500 3/4 ton longbed stepside (currently w/flatbed), 4 on the floor, 305-V6-5.0L
jteck10 is offline   Reply With Quote
Old 09-19-2015, 02:26 PM   #163
LostMy65
But Found Her 25yrs Later!
 
LostMy65's Avatar
 
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,457
Re: The 60-66 "PAYING IT FORWARD" thread!

Quote:
Originally Posted by jteck10 View Post
shipping an option if i pay?
If I can just drop them off someplace and someone else takes care of them from there, sure.
__________________
I lost my 65 - Found it 25 years later:
http://67-72chevytrucks.com/vboard/s...d.php?t=426650

66 C20 Service Truck:
http://67-72chevytrucks.com/vboard/s...d.php?t=428035
LostMy65 is offline   Reply With Quote
Old 09-19-2015, 03:15 PM   #164
jteck10
Registered User
 
jteck10's Avatar
 
Join Date: Aug 2015
Location: Bay Area, CA
Posts: 94
Re: The 60-66 "PAYING IT FORWARD" thread!

Quote:
Originally Posted by LostMy65 View Post
If I can just drop them off someplace and someone else takes care of them from there, sure.
ill pm you
__________________
1962 GMC 2500 3/4 ton longbed stepside (currently w/flatbed), 4 on the floor, 305-V6-5.0L
jteck10 is offline   Reply With Quote
Old 09-20-2015, 09:02 PM   #165
HumphreyMurdoch
Registered User
 
HumphreyMurdoch's Avatar
 
Join Date: May 2012
Location: Murphy, MO
Posts: 172
Re: The 60-66 "PAYING IT FORWARD" thread!

I've got a few pieces I saved off my '62 that are free to anyone who can use them.

Rear step bumper. I had to cut off one of the brackets but its a straight cut and should be pretty easy to reuse. It's really heavy.

[IMG][/IMG]

[IMG][/IMG]

I also have both lower control arms with the torsion bars still in them, H032 center section and both axle shafts still available if anyone is interested.

I can post pics of the other stuff if needed.

I'd really prefer not to ship these, but if ya really need it I'll see what I can do.
__________________
'62 C10 LWB fleet side.
283 w/ a T5
HumphreyMurdoch is offline   Reply With Quote
Old 09-20-2015, 09:17 PM   #166
62 bigwindow
Registered User
 
62 bigwindow's Avatar
 
Join Date: Apr 2011
Location: Mocksville NC
Posts: 824
Re: The 60-66 "PAYING IT FORWARD" thread!

Factory gauges from I believe 64 with warning lights
was in a load of parts I got looks to be in decent shape but noticed the speedo needle is MIA..if anybody needs one for parts or can fix the needle you are welcome to it just toss in a little for shipping.. I am in NC
Attached Images
 
62 bigwindow is offline   Reply With Quote
Old 09-21-2015, 11:00 AM   #167
tigerburns
Active Member
 
tigerburns's Avatar
 
Join Date: Aug 2015
Location: Greenville, SC
Posts: 129
Re: The 60-66 "PAYING IT FORWARD" thread!

Quote:
Originally Posted by 62 bigwindow View Post
Factory gauges from I believe 64 with warning lights
was in a load of parts I got looks to be in decent shape but noticed the speedo needle is MIA..if anybody needs one for parts or can fix the needle you are welcome to it just toss in a little for shipping.. I am in NC
I could use it for some parts on one that I am restoring now. What would shipping to 29662 be?
tigerburns is offline   Reply With Quote
Old 10-13-2015, 10:59 AM   #168
matt_l
Registered User
 
Join Date: Jan 2013
Location: Milford, MI
Posts: 159
Re: The 60-66 "PAYING IT FORWARD" thread!

Inline 6 250 casting number 366855. Still in truck and you can hear it run.. Has some issues and runs on the hot side. I am switching over to an LS motor, and if anyone can use it, come and get it. I am in Milford MI. You can also have the three speed manual transmission. If no one wants it, I am just going to scrap it.
Attached Images
 
__________________
Matt
Father Son 66 Build: http://67-72chevytrucks.com/vboard/s...d.php?t=564694
matt_l is offline   Reply With Quote
Old 10-13-2015, 11:46 AM   #169
blown240
Registered User
 
blown240's Avatar
 
Join Date: Jan 2011
Location: CA
Posts: 772
Re: The 60-66 "PAYING IT FORWARD" thread!

Oh Man! I wish you were closer!
__________________
'61 Panel - Helms Bakery Truck - Daily Driver - FOR SALE
blown240 is offline   Reply With Quote
Old 10-14-2015, 11:56 AM   #170
zplightning
Registered User
 
Join Date: Jul 2014
Location: San Diego, CA
Posts: 77
Re: The 60-66 "PAYING IT FORWARD" thread!

I have a Classic Performance Trac Bar 6364DATB, which is supposedly made for 63-64 trucks. Brand new, with attempted installation marks on it.

I bought it from Summit, and I can't get it to fit for the life of me, I am sure it user error but I could use some good karma and I'm just going to put new bushings in my stock bar.

Here is the exact one: http://www.summitracing.com/parts/cl...datb/overview/

I think it's missing a lock nut on it from trying to get it on, but I think it can be used as is or replaced (you can still lock the bar from spinning with one nut)

Please don't ask for this to resell, if you've got a lowered 63-64 and can pay shipping, I will send it to you.

-Zac
zplightning is offline   Reply With Quote
Old 10-14-2015, 12:07 PM   #171
Raptor0206
Registered User
 
Join Date: Jun 2015
Location: Las Vegas, NV
Posts: 63
Re: The 60-66 "PAYING IT FORWARD" thread!

Quote:
Originally Posted by zplightning View Post
I have a Classic Performance Trac Bar 6364DATB, which is supposedly made for 63-64 trucks. Brand new, with attempted installation marks on it.

I bought it from Summit, and I can't get it to fit for the life of me, I am sure it user error but I could use some good karma and I'm just going to put new bushings in my stock bar.

Here is the exact one: http://www.summitracing.com/parts/cl...datb/overview/

I think it's missing a lock nut on it from trying to get it on, but I think it can be used as is or replaced (you can still lock the bar from spinning with one nut)

Please don't ask for this to resell, if you've got a lowered 63-64 and can pay shipping, I will send it to you.

-Zac
PM sent
Raptor0206 is offline   Reply With Quote
Old 10-15-2015, 01:27 PM   #172
zplightning
Registered User
 
Join Date: Jul 2014
Location: San Diego, CA
Posts: 77
Re: The 60-66 "PAYING IT FORWARD" thread!

Quote:
Originally Posted by zplightning View Post
I have a Classic Performance Trac Bar 6364DATB, which is supposedly made for 63-64 trucks. Brand new, with attempted installation marks on it.

I bought it from Summit, and I can't get it to fit for the life of me, I am sure it user error but I could use some good karma and I'm just going to put new bushings in my stock bar.

Here is the exact one: http://www.summitracing.com/parts/cl...datb/overview/

I think it's missing a lock nut on it from trying to get it on, but I think it can be used as is or replaced (you can still lock the bar from spinning with one nut)

Please don't ask for this to resell, if you've got a lowered 63-64 and can pay shipping, I will send it to you.

-Zac
This is still available if anyone has a 63 or 64 truck to put this on (it won't fit other years)
zplightning is offline   Reply With Quote
Old 10-16-2015, 09:18 AM   #173
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Re: The 60-66 "PAYING IT FORWARD" thread!

Quote:
Originally Posted by zplightning View Post
This is still available if anyone has a 63 or 64 truck to put this on (it won't fit other years)
Im interested if its still available. PM sent
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer
1963c-10 is offline   Reply With Quote
Old 10-21-2015, 08:03 AM   #174
jlwilliams598
Registered User
 
Join Date: Oct 2012
Location: Jackson, TN
Posts: 11
Re: The 60-66 "PAYING IT FORWARD" thread!

62 bigwindow, did anyone get the gauges from you? I am in Charleston and could use them if you still have them.
jlwilliams598 is offline   Reply With Quote
Old 10-27-2015, 10:33 AM   #175
slepysal
Registered User
 
slepysal's Avatar
 
Join Date: Oct 2006
Location: San Jose NOR*CAL
Posts: 3,077
Re: The 60-66 "PAYING IT FORWARD" thread!

Quote:
Originally Posted by jlwilliams598 View Post
62 bigwindow, did anyone get the gauges from you? I am in Charleston and could use them if you still have them.
I might have one I can check for you
__________________
1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes.

"Over, Around or through it... "
slepysal is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:13 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com