RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!

[SparkyRnD]

Sure. On the brackets, ours uses the stock brackets with the 3-core or 4-core inserts. Depending on which inserts you have, you may have to trim the rubber slightly. On the fans, we use Spal and Derale as well as a private-label fan made for us depending on your location, horsepower level, etc.

[RoyL]

Originally Posted by SparkyRnD

Sure. On the brackets, ours uses the stock brackets with the 3-core or 4-core inserts. Depending on which inserts you have, you may have to trim the rubber slightly. On the fans, we use Spal and Derale as well as a private-label fan made for us depending on your location, horsepower level, etc.

Thanks,
What is the cfm for the fans you use? And noise level?
Some high end rad/fan combos I've heard are LOUD, can hear them coming across the parking lot...
I understand the more air moved, the louder they are, but not be obnoxious...
Thanks for any insights on your fan specs.
Roy

[SparkyRnD]

for the fan(s), that depends on location where it'll be used, horsepower levels and how much space is available. We have 1,200cfm to 2,400cfm per fan, depending again on the above. Noise on the 2,400 fan is loud, but not horrible.