67-72 partsssssssss! - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 05-06-2009, 09:10 PM

Cyclone44, George here is apic of fuse and splice

deweychop · 05-06-2009, 09:11 PM

Consider that stuff sold!!!! Can you do me a huge favor though. Don't ship till next Thursday. I'm leaving on vacation this saturday and not getting back till next saturday. PM me your Paypal info.

teeitup · 05-06-2009, 09:11 PM

Forever71, I went out to look at column again, its a little burgered up on end, see pic. I didn't realize it was when I posted price. Now its $25 plus ship

teeitup · 05-06-2009, 09:12 PM

70cst, Dewayne, no problem, Thanks Randy

chas350 · 05-06-2009, 09:18 PM

Randy I will take the tail light, bu lights, wires, side marker lights you quoted me on. pm me the paypal info. pm'd you with a question about the park lights.
thanks
chas

teeitup · 05-06-2009, 09:24 PM

chas350, here is a pic of the front turn signals, they mount to bumper, all mounting areas are good, the lens are driver quality, no bad but not perfect

zeusflash · 05-06-2009, 09:30 PM

How much for the two intake manifold vacuum fittings in group frffr(the ones with two vacuum ports). Figure shipping to 83854. Thanks again Randy!

mattmich · 05-06-2009, 09:37 PM

I will take the brake booster.

johnnykool1 · 05-06-2009, 09:48 PM

Hey,Randy- I'll take a set of V8 motor towers. Pm me your mailing address and I'll get a money order in the mail tomorrow. Thanks! Later - johnny

teeitup · 05-06-2009, 10:11 PM

zeusflash, $16 shipped for the pair
mattmich, Pm'd you total
johnnykool1, PM'd you info.
Thanks Randy

FOREVER71 · 05-06-2009, 10:31 PM

hey randy, check shipping and ill see. it shouldnt be hard to replace that center rod...i just want a floor shift so i need a 4 speed column...let me know...thanks

super72swb · 05-06-2009, 10:40 PM

Any rear bumper brackets ? Shipped to 76009?

teeitup · 05-06-2009, 10:47 PM

Forever71, I'll get a quote tomorrow. If your not wanting the shaft I'm sure it would save on shipping. I'll get a quote for you both ways
super72swb, sorry none right now
Thanks Randy

teeitup · 05-06-2009, 10:49 PM

Deweychop, sure I can wait till next Thurs to ship. Sorry for not getting back with on this thread, we posted at the same time. Thanks Randy

Classic Bowties · 05-07-2009, 01:07 AM

Hi Randy, all of the below circled also any 71/2 4wd front outer bumper brackets or 67 Ign. switch spacers available? Thanks, Mel.

IndyRich · 05-07-2009, 01:18 AM

I would like the GMC parking lights on page one. I could also use the two clear rear back up lenses if they are not cracked and yellowed. Thanks.
Rich

Loptics · 05-07-2009, 02:56 AM

I need the U-bolts, nuts and bracket that retain the leaf springs to the rear axle of a 1/2 ton 4x4 (1972), will buy a pair but only need one. Can you help?

Scott

gcburdic · 05-07-2009, 07:55 AM

Hey Randy,

Spring cleanin again!!!HAHA.....

Do you have a full set of deluxe side makers?...I only saw 3....I believe post 24....

Also, post 12....are those sway bar brackets that attach the frame?...

shipped to 28031

Thanks

teeitup · 05-07-2009, 08:07 AM

Classic Bowties, Mel, $12 for the E-brake cover, $10 for blazer door supports, one is dinged up a little bit but not real bad, $15 for the 3 pass blazer seat brackets, plus $10 shipping, total of $47
Indyrich, let me look at those GMC turn signal lights, I'm thinking they had an issue, but can't remember for sure. If they are OK and for a set of decent backup light lens $25 shipped. I'll look after work
Loptics, sorry no U-bolts right now, I cut them off with a torch
gcburdic, Geoff, yes cleaning again

. I think there is only 3 of the deluxe side markers, I'll check tonight. The brackets in the pic are actually Automatic crossmember brackets for a longhorn, sorry.
Thanks Randy

muscletrucks · 05-07-2009, 08:23 AM

Randy: Please keep me in mind for a clearence light harness. Thanks

gcburdic · 05-07-2009, 08:51 AM

so we are on the same page.....these are automatic x-members for a LH...right??....WOW...they look just like the sway bar brackets!!!....Thanks for the info!!!...And thanks for checking on the side markers for me!!!

cleszkie · 05-07-2009, 12:09 PM

PM'ed you.

chuckmc8 · 05-07-2009, 12:14 PM

I need the blue single arm rest for 67 if its still available. If so, shipped to 30135 please.

Cyclone44 · 05-07-2009, 12:14 PM

Quote:

Originally Posted by Cyclone44

Randy in post #4 and item #4 is a wiring harness under hood for a 72 lights and alt....Was this out of a idiot light or gauge dash truck?....Does it have the black wire in it?

Also post#27 the dual horn wiring......Can you give me the shipped price to 37918 on # 4 and #27....Thanks

Randy thanks for the picture....I will take these two wiring harness's please give me the best looking dual horn harness....Also the outside door handle in post # 27 how much to add it to my other stuff?

teeitup · 05-07-2009, 01:24 PM

Chuckmc8, one crack in it $11 shipped
IndyRich, they are fine, some smal stresscracks in lens but not bad, $25 shipped for them and backup light lens in pic

05-06-2009, 09:10 PM	#51
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 67-72 partsssssssss! Cyclone44, George here is apic of fuse and splice Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-06-2009, 09:11 PM	#52
deweychop Registered User Join Date: Aug 2008 Location: Naples FL Posts: 77	Re: 67-72 partsssssssss! Consider that stuff sold!!!! Can you do me a huge favor though. Don't ship till next Thursday. I'm leaving on vacation this saturday and not getting back till next saturday. PM me your Paypal info. __________________ Horsepower sells cars Torque wins races

05-06-2009, 09:11 PM	#53
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 67-72 partsssssssss! Forever71, I went out to look at column again, its a little burgered up on end, see pic. I didn't realize it was when I posted price. Now its $25 plus ship Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-06-2009, 09:12 PM	#54
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 67-72 partsssssssss! 70cst, Dewayne, no problem, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-06-2009, 09:18 PM	#55
chas350 Registered User Join Date: Mar 2007 Location: Connecticut Posts: 581	Re: 67-72 partsssssssss! Randy I will take the tail light, bu lights, wires, side marker lights you quoted me on. pm me the paypal info. pm'd you with a question about the park lights. thanks chas __________________ "I'll Procrastinate Tomorrow" quote by LEEVON 71 K10 long fleet (sons truck) new 370hp 355, sm465 np205, 3.73's 33's 70 K20 long fleet 98 G3500 work van

05-06-2009, 09:24 PM	#56
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 67-72 partsssssssss! chas350, here is a pic of the front turn signals, they mount to bumper, all mounting areas are good, the lens are driver quality, no bad but not perfect Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-06-2009, 09:30 PM	#57
zeusflash Registered User Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 690	Re: 67-72 partsssssssss! How much for the two intake manifold vacuum fittings in group frffr(the ones with two vacuum ports). Figure shipping to 83854. Thanks again Randy! __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4

05-06-2009, 09:37 PM	#58
mattmich Registered User Join Date: May 2009 Location: Brighton, MI Posts: 3	Re: 67-72 partsssssssss! I will take the brake booster.

05-06-2009, 09:48 PM	#59
johnnykool1 Registered User Join Date: Jun 2004 Location: upstate south carolina Posts: 12	Re: 67-72 partsssssssss! Hey,Randy- I'll take a set of V8 motor towers. Pm me your mailing address and I'll get a money order in the mail tomorrow. Thanks! Later - johnny

05-06-2009, 10:11 PM	#60
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 67-72 partsssssssss! zeusflash, $16 shipped for the pair mattmich, Pm'd you total johnnykool1, PM'd you info. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-06-2009, 10:31 PM	#61
FOREVER71 Registered User Join Date: May 2008 Location: PORTLAND,ORGON Posts: 585	Re: 67-72 partsssssssss! hey randy, check shipping and ill see. it shouldnt be hard to replace that center rod...i just want a floor shift so i need a 4 speed column...let me know...thanks

05-06-2009, 10:40 PM	#62
super72swb Registered User Join Date: Oct 2008 Location: alvarado texas Posts: 109	Re: 67-72 partsssssssss! Any rear bumper brackets ? Shipped to 76009?

05-06-2009, 10:47 PM	#63
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 67-72 partsssssssss! Forever71, I'll get a quote tomorrow. If your not wanting the shaft I'm sure it would save on shipping. I'll get a quote for you both ways super72swb, sorry none right now Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-06-2009, 10:49 PM	#64
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 67-72 partsssssssss! Deweychop, sure I can wait till next Thurs to ship. Sorry for not getting back with on this thread, we posted at the same time. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-07-2009, 01:07 AM	#65
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,538	Re: 67-72 partsssssssss! Hi Randy, all of the below circled also any 71/2 4wd front outer bumper brackets or 67 Ign. switch spacers available? Thanks, Mel. Attached Images



Register or Log In To remove these advertisements.

05-07-2009, 01:18 AM	#66
IndyRich Registered User Join Date: Feb 2009 Location: Indianapolis, IN Posts: 372	Re: 67-72 partsssssssss! I would like the GMC parking lights on page one. I could also use the two clear rear back up lenses if they are not cracked and yellowed. Thanks. Rich

05-07-2009, 02:56 AM	#67
Loptics Registered User Join Date: Jun 2008 Location: Kalispell Montana Posts: 34	Re: 67-72 partsssssssss! I need the U-bolts, nuts and bracket that retain the leaf springs to the rear axle of a 1/2 ton 4x4 (1972), will buy a pair but only need one. Can you help? Scott

05-07-2009, 07:55 AM	#68
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: 67-72 partsssssssss! Hey Randy, Spring cleanin again!!!HAHA..... Do you have a full set of deluxe side makers?...I only saw 3....I believe post 24.... Also, post 12....are those sway bar brackets that attach the frame?... shipped to 28031 Thanks __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present Last edited by gcburdic; 05-07-2009 at 07:57 AM.

05-07-2009, 08:07 AM	#69
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 67-72 partsssssssss! Classic Bowties, Mel, $12 for the E-brake cover, $10 for blazer door supports, one is dinged up a little bit but not real bad, $15 for the 3 pass blazer seat brackets, plus $10 shipping, total of $47 Indyrich, let me look at those GMC turn signal lights, I'm thinking they had an issue, but can't remember for sure. If they are OK and for a set of decent backup light lens $25 shipped. I'll look after work Loptics, sorry no U-bolts right now, I cut them off with a torch gcburdic, Geoff, yes cleaning again. I think there is only 3 of the deluxe side markers, I'll check tonight. The brackets in the pic are actually Automatic crossmember brackets for a longhorn, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-07-2009, 08:23 AM	#70
muscletrucks Registered User Join Date: Mar 2008 Location: Kansas City Posts: 431	Re: 67-72 partsssssssss! Randy: Please keep me in mind for a clearence light harness. Thanks __________________ 1972 GMC Sierra Grande 3/4 Ton 4x4 1970 Mercury Cougar XR7 1943 Farmall M

05-07-2009, 08:51 AM	#71
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: 67-72 partsssssssss! so we are on the same page.....these are automatic x-members for a LH...right??....WOW...they look just like the sway bar brackets!!!....Thanks for the info!!!...And thanks for checking on the side markers for me!!! Attached Images __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present Last edited by gcburdic; 05-07-2009 at 08:52 AM.

05-07-2009, 12:09 PM	#72
cleszkie Registered User Join Date: Feb 2003 Location: Santa Ana, CA Posts: 2,191	Re: 67-72 partsssssssss! PM'ed you.

05-07-2009, 12:14 PM	#73
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: 67-72 partsssssssss! I need the blue single arm rest for 67 if its still available. If so, shipped to 30135 please.

05-07-2009, 01:24 PM	#75
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 67-72 partsssssssss! Chuckmc8, one crack in it $11 shipped IndyRich, they are fine, some smal stresscracks in lens but not bad, $25 shipped for them and backup light lens in pic Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 05-07-2009 at 01:26 PM.

Register or Log In To remove these advertisements.