The 6.0 Silverado Build - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Driveway Dreams · 02-01-2010, 12:42 PM

That would be funny.
Matchstick, I too am interested in seeing some of your buddies work.

STOCKISH · 02-01-2010, 02:22 PM

Somebody is going to have trucks lined up waiting for paint before we know it!

menace121978 · 02-06-2010, 09:10 AM

To The Top!

man, this was buried! whats going on here Josh? It's been a week!!!!

STOCKISH · 02-06-2010, 09:45 AM

Well, got the flu Sunday night, didnt leave the house till Thursday for work. Still waiting for Summit to bring some stuff. Wife has to work today(sat.) as a snow make up day so I'm hangin out with my 2 year old today. Would take him out in the garage but 19 is a little cold for him. Hoping for some progress next week. Just need to find time to take the truck to pressure wash the frame so I can paint it and set the 6.0 back in. Just cant bring myself to bolt it in with the frame all nasty. Trust me, I tried...TWICE. Will likely have to wait till next weekend.

Hows yours looking?

STOCKISH · 02-06-2010, 03:44 PM

OK, wifes home and we're done with lunch. I'm going to pull the engine/trans back out and get some cleaning and paint on the chassis. I dont care if it's
27* outside. Progress will be had today.

STOCKISH · 02-06-2010, 05:37 PM

OK, got to cleaning the frame and realized it was pretty nice looking under the dirt. Didnt tear it all apart to paint it like I was planning for three reasons.
1. It's going to get the wheels driven off it... ALOT, so, a perfect chassis is not really nessecary on this truck.
2. Knowing me in 4-6 years when I'm done paying for day care it'll likely get torn down to the frame and completely re-done anyway.
3. I'm ready to boil the rear tires off this thing.
So, the engine and trans are now in for the final time and all I need to do now is mock up or purchase a crossmember for the transmission. As an added bonus, I found out my stock manifolds will work just fine for the time being. My Lokar trans shifter is on the way and I'm waiting to get my harness back from wait4meperformance so I can get back on this thing. Man I'm glad I got out there and got SOMETHING done.

menace121978 · 02-06-2010, 07:31 PM

i'm glad to man!! hey, was wondering... do you have to have the lokar shift cable? and was there alreay a hole on the x member where the front bottom frame stand bolt goes?

STOCKISH · 02-06-2010, 08:08 PM

The lokar shifter I have is part number ACA-1800. There was no hole in the crossmember for the lower frame stand bolt. Man, Are you going with a cable shifter instead of the linkage type?

menace121978 · 02-06-2010, 08:17 PM

i dont know yet. i wasnt sure we would need one. i was going to see if my stock linkage will work this weekend.

STOCKISH · 02-06-2010, 11:15 PM

Mine wouldnt, I just bought the Lokar one. Fits perfect and is fully adjustable. For $60 you cant go wrong. Here's a pic. Same one PCMCOBRA has with a 4l80 and the S&P headers.

lownfast · 02-08-2010, 12:32 AM

i think i have the stock air box and tube in my garage, pm sent

STOCKISH · 02-08-2010, 12:38 AM

PM returned. Interested, thanks.

JohnC · 02-08-2010, 10:36 AM

Sick or not man we need pics!

79gmc5.3 · 02-08-2010, 01:13 PM

Quote:

Originally Posted by JohnC

Sick or not man we need pics!

X2 on the pics

STOCKISH · 02-08-2010, 04:04 PM

Well, both fuel tanks are ordered, fuel pumps and senders already here so I will assemble and install hopefully this weekend. Need to remove the bed to insatll tanks and fuel lines and engine/trans for the final time so I can paint the frame. I really thought I could leave it in there but my conscience just wont let me do it. O well, I needed another thing to add to my list of "needs" to do. Hopefully I will actually make some progress and will have pics soon.

STOCKISH · 02-08-2010, 10:18 PM

OK picture police, here we go. Went ahead and pulled the engine and trans back out tonight so I could reinstall the freshly painted accessories as well as the valve covers. Went ahead with the black valve covers and alt, A/C compressor so I would keep with the black and silver like the exterior. Will take the truck and press. wash and paint the chassis this weekend as long as weather permits. Cant wait to pull the bed and get rolling on the fuel system and get the drivetrain reinstalled. Heres what I've got tonight.

STOCKISH · 02-08-2010, 10:22 PM

More... Sorry about the quality. The flash kills it.

Driveway Dreams · 02-08-2010, 10:23 PM

Looks really good Josh. I am sure you are getting antsy to have it back together and drive the heck out of it. Oh, the alternator looks great in black.

STOCKISH · 02-08-2010, 10:27 PM

The black looks great in person. For some reason in the pic it looks like it's bubbly? It actually looks better than I expected.

menace121978 · 02-08-2010, 10:59 PM

looking great man! little by little...

VA72C10 · 02-08-2010, 11:34 PM

I like the color combo...looking good!

fpjr0 · 02-08-2010, 11:42 PM

what did you guys do for power steering lines,,, the high pressure hose was cut... its long enough just dont have any fitting at the end I could try to adapt...
what do you guys recommend? just need the fastest, easiest, way to do it.. doesnt have to be the cheapest route!!!! I tried a few part stores but they "dont do" power steering hoses,
thanks in advanced,,,

glock35ipsc · 02-09-2010, 12:02 AM

fpjr0 -You can use the original hose from the truck. Take the hose off the original PS pump, then remove the fitting that it was threaded into (the fitting that threads into the back of the pump). Replace that fitting on the LS pump with the one from your truck's pump, and use the truck's original hose.

Josh - It's looking great!

JohnC · 02-09-2010, 10:16 AM

Looks awesome Josh!

fpjr0 · 02-09-2010, 01:08 PM

Quote:

Originally Posted by glock35ipsc

fpjr0 -You can use the original hose from the truck. Take the hose off the original PS pump, then remove the fitting that it was threaded into (the fitting that threads into the back of the pump). Replace that fitting on the LS pump with the one from your truck's pump, and use the truck's original hose.

I wish I'd ask this question b4 installing eng. and harness lol
thanks bob

truck is looking good!!

02-01-2010, 12:42 PM	#101
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: The 6.0 Silverado Build That would be funny. Matchstick, I too am interested in seeing some of your buddies work. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

02-01-2010, 02:22 PM	#102
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: The 6.0 Silverado Build Somebody is going to have trucks lined up waiting for paint before we know it! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

02-06-2010, 09:10 AM	#103
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: The 6.0 Silverado Build To The Top! man, this was buried! whats going on here Josh? It's been a week!!!! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

02-06-2010, 09:45 AM	#104
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: The 6.0 Silverado Build Well, got the flu Sunday night, didnt leave the house till Thursday for work. Still waiting for Summit to bring some stuff. Wife has to work today(sat.) as a snow make up day so I'm hangin out with my 2 year old today. Would take him out in the garage but 19 is a little cold for him. Hoping for some progress next week. Just need to find time to take the truck to pressure wash the frame so I can paint it and set the 6.0 back in. Just cant bring myself to bolt it in with the frame all nasty. Trust me, I tried...TWICE. Will likely have to wait till next weekend. Hows yours looking? __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

02-06-2010, 03:44 PM	#105
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: The 6.0 Silverado Build OK, wifes home and we're done with lunch. I'm going to pull the engine/trans back out and get some cleaning and paint on the chassis. I dont care if it's 27* outside. Progress will be had today. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

02-06-2010, 05:37 PM	#106
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: The 6.0 Silverado Build OK, got to cleaning the frame and realized it was pretty nice looking under the dirt. Didnt tear it all apart to paint it like I was planning for three reasons. 1. It's going to get the wheels driven off it... ALOT, so, a perfect chassis is not really nessecary on this truck. 2. Knowing me in 4-6 years when I'm done paying for day care it'll likely get torn down to the frame and completely re-done anyway. 3. I'm ready to boil the rear tires off this thing. So, the engine and trans are now in for the final time and all I need to do now is mock up or purchase a crossmember for the transmission. As an added bonus, I found out my stock manifolds will work just fine for the time being. My Lokar trans shifter is on the way and I'm waiting to get my harness back from wait4meperformance so I can get back on this thing. Man I'm glad I got out there and got SOMETHING done. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

02-06-2010, 07:31 PM	#107
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: The 6.0 Silverado Build i'm glad to man!! hey, was wondering... do you have to have the lokar shift cable? and was there alreay a hole on the x member where the front bottom frame stand bolt goes? __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

02-06-2010, 08:08 PM	#108
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: The 6.0 Silverado Build The lokar shifter I have is part number ACA-1800. There was no hole in the crossmember for the lower frame stand bolt. Man, Are you going with a cable shifter instead of the linkage type? __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

02-06-2010, 08:17 PM	#109
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: The 6.0 Silverado Build i dont know yet. i wasnt sure we would need one. i was going to see if my stock linkage will work this weekend. __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

02-06-2010, 11:15 PM	#110
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: The 6.0 Silverado Build Mine wouldnt, I just bought the Lokar one. Fits perfect and is fully adjustable. For $60 you cant go wrong. Here's a pic. Same one PCMCOBRA has with a 4l80 and the S&P headers. Attached Images __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

02-08-2010, 12:32 AM	#111
lownfast Gettinlow & Goinfast Join Date: Dec 2005 Location: ft. worth, tx Posts: 223	Re: The 6.0 Silverado Build i think i have the stock air box and tube in my garage, pm sent __________________ Protouring Texas built rides- 78' K5 bodied on 22's, 5.3/ 4L60E- sold-Bdydrptk5- http://67-72chevytrucks.com/vboard/s...d.php?t=358390 71' Chevelle #Bigbootyjudy 6.0 LSx, LS9 heads, Magnuson, T56 - http://ls1tech.com/forums/conversion...e-ly6-t56.html 70' Chevelle #EvilAnnie Lsx/4L80/S475 turbo- 85' C20 crew, 5.3/6L90/S475 turbo- 68' C10 5.3/4L60/Level 2 coil overs Facebook- Protouringtexasdotcom Instagram- @Protouringtexas

02-08-2010, 12:38 AM	#112
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: The 6.0 Silverado Build PM returned. Interested, thanks. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

02-08-2010, 10:36 AM	#113
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: The 6.0 Silverado Build Sick or not man we need pics!

02-08-2010, 04:04 PM	#115
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: The 6.0 Silverado Build Well, both fuel tanks are ordered, fuel pumps and senders already here so I will assemble and install hopefully this weekend. Need to remove the bed to insatll tanks and fuel lines and engine/trans for the final time so I can paint the frame. I really thought I could leave it in there but my conscience just wont let me do it. O well, I needed another thing to add to my list of "needs" to do. Hopefully I will actually make some progress and will have pics soon. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

02-08-2010, 10:18 PM	#116
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: The 6.0 Silverado Build OK picture police, here we go. Went ahead and pulled the engine and trans back out tonight so I could reinstall the freshly painted accessories as well as the valve covers. Went ahead with the black valve covers and alt, A/C compressor so I would keep with the black and silver like the exterior. Will take the truck and press. wash and paint the chassis this weekend as long as weather permits. Cant wait to pull the bed and get rolling on the fuel system and get the drivetrain reinstalled. Heres what I've got tonight. Attached Images __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.



Register or Log In To remove these advertisements.

02-08-2010, 10:22 PM	#117
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: The 6.0 Silverado Build More... Sorry about the quality. The flash kills it. Attached Images __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

02-08-2010, 10:23 PM	#118
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: The 6.0 Silverado Build Looks really good Josh. I am sure you are getting antsy to have it back together and drive the heck out of it. Oh, the alternator looks great in black. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here. Last edited by Driveway Dreams; 02-08-2010 at 10:24 PM.

02-08-2010, 10:27 PM	#119
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: The 6.0 Silverado Build The black looks great in person. For some reason in the pic it looks like it's bubbly? It actually looks better than I expected. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

02-08-2010, 10:59 PM	#120
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: The 6.0 Silverado Build looking great man! little by little... __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

02-08-2010, 11:34 PM	#121
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: The 6.0 Silverado Build I like the color combo...looking good! __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-08-2010, 11:42 PM	#122
fpjr0 Registered User Join Date: Mar 2009 Location: san antonio tx Posts: 202	Re: The 6.0 Silverado Build what did you guys do for power steering lines,,, the high pressure hose was cut... its long enough just dont have any fitting at the end I could try to adapt... what do you guys recommend? just need the fastest, easiest, way to do it.. doesnt have to be the cheapest route!!!! I tried a few part stores but they "dont do" power steering hoses, thanks in advanced,,,

02-09-2010, 12:02 AM	#123
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: The 6.0 Silverado Build fpjr0 -You can use the original hose from the truck. Take the hose off the original PS pump, then remove the fitting that it was threaded into (the fitting that threads into the back of the pump). Replace that fitting on the LS pump with the one from your truck's pump, and use the truck's original hose. Josh - It's looking great! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

02-09-2010, 10:16 AM	#124
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: The 6.0 Silverado Build Looks awesome Josh!

Register or Log In To remove these advertisements.