I need an Antenna coax cable - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mike Culpepper · 05-14-2003, 12:35 PM

I brilliantly squashed the part of my antenna cable that goes into the radio the other day. I tried to un-squash it but it still doesn't work. Can you buy these at a local Auto Zone ? If not , anybody got one they don't need. It's for a '72 Cheyenne.
Mike

billsbowtie · 05-14-2003, 03:57 PM

i have one ant is not to good but coax is $12.00 shipping included

Mike Culpepper · 05-14-2003, 11:53 PM

Could I use my antenna and your cable, or is it a one piece type set up? I don't have my antenna off the truck, so I don't know how the cable attaches to the antenna.
Mike

67_SS396 · 05-15-2003, 01:23 AM

You should be able to get a splicer at any audio store. I need to make a run to Fry's and get a splicer. I have two antennas, one has a good mast with a bad mount and cable, the other has a bad cable and good mount. It's like the typical coax, just a smaller guage.

Mike Culpepper · 05-15-2003, 09:06 AM

I may try that first. billsbowtie, if I strike out I may give 'ya a holler.
Mike

billsbowtie · 05-15-2003, 09:35 AM

ok the one i have is off a 71 c10

05-14-2003, 12:35 PM	#1
Mike Culpepper Red Join Date: Feb 2003 Location: Llano... Texas Hill Country Posts: 448	I need an Antenna coax cable I brilliantly squashed the part of my antenna cable that goes into the radio the other day. I tried to un-squash it but it still doesn't work. Can you buy these at a local Auto Zone ? If not , anybody got one they don't need. It's for a '72 Cheyenne. Mike __________________ '72 Cheyenne LWB 350/350 "The sun don't shine on the same dog's ass all the time." - Catfish Hunter (commenting on why he was not able to pitch another perfect game).

05-14-2003, 03:57 PM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	i have one ant is not to good but coax is $12.00 shipping included __________________ i have 67/72 chevy truck parts f/s.

05-14-2003, 11:53 PM	#3
Mike Culpepper Red Join Date: Feb 2003 Location: Llano... Texas Hill Country Posts: 448	Could I use my antenna and your cable, or is it a one piece type set up? I don't have my antenna off the truck, so I don't know how the cable attaches to the antenna. Mike __________________ '72 Cheyenne LWB 350/350 "The sun don't shine on the same dog's ass all the time." - Catfish Hunter (commenting on why he was not able to pitch another perfect game).

05-15-2003, 01:23 AM	#4
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	You should be able to get a splicer at any audio store. I need to make a run to Fry's and get a splicer. I have two antennas, one has a good mast with a bad mount and cable, the other has a bad cable and good mount. It's like the typical coax, just a smaller guage. __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this." Last edited by 67_SS396; 05-15-2003 at 10:24 AM.

05-15-2003, 09:06 AM	#5
Mike Culpepper Red Join Date: Feb 2003 Location: Llano... Texas Hill Country Posts: 448	I may try that first. billsbowtie, if I strike out I may give 'ya a holler. Mike __________________ '72 Cheyenne LWB 350/350 "The sun don't shine on the same dog's ass all the time." - Catfish Hunter (commenting on why he was not able to pitch another perfect game).

05-15-2003, 09:35 AM	#6
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	ok the one i have is off a 71 c10 __________________ i have 67/72 chevy truck parts f/s.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.