KS Pre Mothers Day sale 67-72 truck parts - Page 13 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jervin · 10-10-2013, 01:01 AM

Hello. do you have any of the following, '67/'68 radiator support, 67/68 grille and/or grill hoops(inserts) and any power steering components for a 292 engine? Thanks, jervin

teeitup · 10-10-2013, 07:40 AM

Greg, info sent

Jervin, no support or ps stuff for 6 cyl. I will have a 67 chevy grill with inserts coming in. I think it will be here Sun but not sure yet

Thanks Randy

teeitup · 10-10-2013, 07:45 AM

JimH2828, JIm, sorry all I have is 4 speed boot ring, no transfer case boot ring, no 4x4 knob, no 4x4 shrouds, no 4x4 exhaust manifolds, I have 2 heat pipes and one back shield for heat stove, all I have is painted wing windows right now no chrome ones, I have 8 tower clamps. I think I'm buying a 4x4 but not sure if I'm going to part it out of sell complete

Thanks Randy

JimH2828 · 10-10-2013, 10:30 AM

That's too bad, keep me in mind when the next 4x4 comes in. Can you send a pic of the tower clamps?

Thanks
Jim

teeitup · 10-14-2013, 07:11 PM

pic

JimH2828 · 10-14-2013, 08:56 PM

Thanks for posting the pic.....what's your price shipped to 30005 GA?

-Jim

teeitup · 10-16-2013, 08:56 PM

Jim, $16 shipped for the ones in pic. Thanks Randy

JimH2828 · 10-16-2013, 09:21 PM

Randy, sounds good, I'll get $16 in the mail tomorrow.

Thanks
Jim

tallbob · 10-21-2013, 10:38 AM

Looking for power steering pump brackets for a 70 C-10 with swp smallblock. Particularly the rear bracket that is behind the resevoir. Thanks much, Bob

teeitup · 10-21-2013, 12:35 PM

Jim, sounds good, Thanks

Bob, sorry I only have a front bracket right now.

Thanks Randy

jervin · 11-03-2013, 12:22 AM

Hello, would you have any parts, brackets, pump, etc related to power steering for a 292 six? Thanks

teeitup · 11-03-2013, 09:28 AM

Sorry no 6 cyl stuff right now, Thanks Randy

Hawghauler · 11-03-2013, 11:02 AM

Hello Randy,
I think they may be gone already, but do you have any of the deluxe dash knobs for a '67? smaller than '68-72 stainless insert style with knurl? I need 3. Also passenger fender trim for '67 or '68.
Thanks,
Curtis

teeitup · 11-03-2013, 12:31 PM

Curtis, all I have now is the radio knobs, I have them listed separately in another thread. Thanks Randy

CaliLivn · 11-03-2013, 02:26 PM

Do you still have the 72 window reg an a 72 passenger door latch? How much each?

teeitup · 11-04-2013, 07:17 PM

Calilivn, are you needing both for pass side? Thanks Randy

gs1969 · 11-04-2013, 09:31 PM

Randy,

Looking for small block A/C compressor brackets, and 4 bbl Air breather and spacer. Have any? Price?

Gary

teeitup · 11-04-2013, 09:45 PM

Gary, I'll have to look on AC brackets, I have some out out there, not sure if I have the whole set. I think I'm sold out of air cleaners, I will look Tues after work and get pics of what I have. Thanks Randy

CaliLivn · 11-05-2013, 11:21 AM

Quote:

Originally Posted by teeitup

Calilivn, are you needing both for pass side? Thanks Randy

Yeah I need the passenger door reg an passenger door latch for a 72 chevy

teeitup · 11-05-2013, 11:30 AM

I have both out there, I'll get pics later this afternoon and price. Thanks Randy

teeitup · 11-05-2013, 07:12 PM

CaliLivn, is this what all your needing

teeitup · 11-05-2013, 07:13 PM

Gary, all I have is this in SB AC brackets, missing intake and the small flat one that comes from intake. $50 for these, sorry no air cleaners

CaliLivn · 11-05-2013, 07:27 PM

Quote:

Originally Posted by teeitup

CaliLivn, is this what all your needing

I'll take the passenger side door latch as long as it works good an I'm sorry I need the drivers side window reg. How much for both shipped to 93635? Thank you

teeitup · 11-05-2013, 07:37 PM

72 drivers side window reg and pass door latch $55 shipped. Thanks Randy

gs1969 · 11-05-2013, 10:39 PM

Randy,

I'll take them, all I have is the intake bracket, so I'm almost there, maybe I'll be able to get out this weekend, what day or time works for you.

Thanks Gary

10-10-2013, 01:01 AM	#301
jervin Registered User Join Date: Jul 2009 Location: Swartz Creek, Michigan Posts: 85	Re: Pre Mothers Day sale 67-72 truck parts Hello. do you have any of the following, '67/'68 radiator support, 67/68 grille and/or grill hoops(inserts) and any power steering components for a 292 engine? Thanks, jervin

10-10-2013, 07:40 AM	#302
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Pre Mothers Day sale 67-72 truck parts Greg, info sent Jervin, no support or ps stuff for 6 cyl. I will have a 67 chevy grill with inserts coming in. I think it will be here Sun but not sure yet Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-10-2013, 07:45 AM	#303
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Pre Mothers Day sale 67-72 truck parts JimH2828, JIm, sorry all I have is 4 speed boot ring, no transfer case boot ring, no 4x4 knob, no 4x4 shrouds, no 4x4 exhaust manifolds, I have 2 heat pipes and one back shield for heat stove, all I have is painted wing windows right now no chrome ones, I have 8 tower clamps. I think I'm buying a 4x4 but not sure if I'm going to part it out of sell complete Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-10-2013, 10:30 AM	#304
JimH2828 Registered User Join Date: Oct 2012 Location: Cumming GA Posts: 613	Re: Pre Mothers Day sale 67-72 truck parts That's too bad, keep me in mind when the next 4x4 comes in. Can you send a pic of the tower clamps? Thanks Jim

10-14-2013, 07:11 PM	#305
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Pre Mothers Day sale 67-72 truck parts pic Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-14-2013, 08:56 PM	#306
JimH2828 Registered User Join Date: Oct 2012 Location: Cumming GA Posts: 613	Re: Pre Mothers Day sale 67-72 truck parts Thanks for posting the pic.....what's your price shipped to 30005 GA? -Jim

10-16-2013, 08:56 PM	#307
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Pre Mothers Day sale 67-72 truck parts Jim, $16 shipped for the ones in pic. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-16-2013, 09:21 PM	#308
JimH2828 Registered User Join Date: Oct 2012 Location: Cumming GA Posts: 613	Re: Pre Mothers Day sale 67-72 truck parts Randy, sounds good, I'll get $16 in the mail tomorrow. Thanks Jim

10-21-2013, 10:38 AM	#309
tallbob Registered User Join Date: Aug 2013 Location: Greensburg,Pa Posts: 147	Re: Pre Mothers Day sale 67-72 truck parts Looking for power steering pump brackets for a 70 C-10 with swp smallblock. Particularly the rear bracket that is behind the resevoir. Thanks much, Bob

10-21-2013, 12:35 PM	#310
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Pre Mothers Day sale 67-72 truck parts Jim, sounds good, Thanks Bob, sorry I only have a front bracket right now. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-03-2013, 12:22 AM	#311
jervin Registered User Join Date: Jul 2009 Location: Swartz Creek, Michigan Posts: 85	Re: Pre Mothers Day sale 67-72 truck parts Hello, would you have any parts, brackets, pump, etc related to power steering for a 292 six? Thanks

11-03-2013, 09:28 AM	#312
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Pre Mothers Day sale 67-72 truck parts Sorry no 6 cyl stuff right now, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-03-2013, 11:02 AM	#313
Hawghauler Registered User Join Date: Nov 2012 Location: Whidbey Island/Edmonds,WA Posts: 360	Re: Pre Mothers Day sale 67-72 truck parts Hello Randy, I think they may be gone already, but do you have any of the deluxe dash knobs for a '67? smaller than '68-72 stainless insert style with knurl? I need 3. Also passenger fender trim for '67 or '68. Thanks, Curtis __________________ If I have to be on 4 wheels, It has to be a classic Chevy 1967 c10 Longbed (Hawghauler/Icy weather transport) 2003 BMW K1200GT (Rain bike) 2007 Softail Deuce (Sun bike) 2009 Ultra Classic Electra Glide (Everything else bike)

11-03-2013, 12:31 PM	#314
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Pre Mothers Day sale 67-72 truck parts Curtis, all I have now is the radio knobs, I have them listed separately in another thread. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-03-2013, 02:26 PM	#315
CaliLivn Registered User Join Date: Oct 2013 Location: Northern Ca Posts: 71	Re: Pre Mothers Day sale 67-72 truck parts Do you still have the 72 window reg an a 72 passenger door latch? How much each?



Register or Log In To remove these advertisements.

11-04-2013, 07:17 PM	#316
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Pre Mothers Day sale 67-72 truck parts Calilivn, are you needing both for pass side? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-04-2013, 09:31 PM	#317
gs1969 Registered User Join Date: Jun 2007 Location: Leavenworth Posts: 72	Re: Pre Mothers Day sale 67-72 truck parts Randy, Looking for small block A/C compressor brackets, and 4 bbl Air breather and spacer. Have any? Price? Gary

11-04-2013, 09:45 PM	#318
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Pre Mothers Day sale 67-72 truck parts Gary, I'll have to look on AC brackets, I have some out out there, not sure if I have the whole set. I think I'm sold out of air cleaners, I will look Tues after work and get pics of what I have. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-05-2013, 11:30 AM	#320
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Pre Mothers Day sale 67-72 truck parts I have both out there, I'll get pics later this afternoon and price. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-05-2013, 07:12 PM	#321
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Pre Mothers Day sale 67-72 truck parts CaliLivn, is this what all your needing Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-05-2013, 07:13 PM	#322
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Pre Mothers Day sale 67-72 truck parts Gary, all I have is this in SB AC brackets, missing intake and the small flat one that comes from intake. $50 for these, sorry no air cleaners Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-05-2013, 07:37 PM	#324
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Pre Mothers Day sale 67-72 truck parts 72 drivers side window reg and pass door latch $55 shipped. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-05-2013, 10:39 PM	#325
gs1969 Registered User Join Date: Jun 2007 Location: Leavenworth Posts: 72	Re: Pre Mothers Day sale 67-72 truck parts Randy, I'll take them, all I have is the intake bracket, so I'm almost there, maybe I'll be able to get out this weekend, what day or time works for you. Thanks Gary

Register or Log In To remove these advertisements.