|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-12-2014, 11:16 PM
|
#1 |
|
Registered User
Join Date: Feb 2012
Location: Elyria, ohio
Posts: 180
|
triangulated 4 link installed
I was originally going to do a parallel 4 link but decided to do a triangulated so I didn't have to mess with a watts link or panhard. I Built a cross member with a tunnel for the drive shaft out of 3/16" wall square tubing and wwelded it inside the frame rails and reinforced it with additional tubing on top of the frame rails.
|
|
|
|
11-13-2014, 12:28 AM
|
#2 |
|
Registered User
Join Date: Dec 2012
Location: la puente so cal
Posts: 51
|
Re: triangulated 4 link installed
Any pics?
|
|
|
|
|
11-13-2014, 06:40 AM
|
#3 |
|
Registered User
Join Date: Feb 2012
Location: Elyria, ohio
Posts: 180
|
Re: triangulated 4 link installed
Sorry I don't know why the picture didn't post
|
|
|
|
|
11-13-2014, 06:51 AM
|
#4 |
|
Registered User
Join Date: Feb 2012
Location: Ruskin Florida
Posts: 4,546
|
Re: triangulated 4 link installed
Nice! More pics! I don't see the other two. Have you driven it yet?
__________________
70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350 |
|
|
|
|
11-13-2014, 07:16 AM
|
#5 |
|
Registered User
Join Date: Feb 2012
Location: Elyria, ohio
Posts: 180
|
Re: triangulated 4 link installed
No. I just got the top bars completely welded in after setting the pinion angle. I used the front leaf sing perch for the lower bars then went stright back to the axle.
|
|
|
|
|
11-13-2014, 08:56 AM
|
#6 |
|
Registered User
Join Date: Feb 2012
Location: Ruskin Florida
Posts: 4,546
|
Re: triangulated 4 link installed
VERY interested in results as I was thinking something like this for my truck in the future. I got the idea from looking at a big box truck one day. It seemed to have half a leaf spring going to the front leaf perch and then air bags under the axle. Nothing in the rear. Must have had some type of track bar but I didn't see one.
More pics are definitely necessary. Curiosity is peaking.
__________________
70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350 |
|
|
|
|
11-16-2014, 02:53 PM
|
#7 |
|
Registered User
Join Date: Feb 2012
Location: Elyria, ohio
Posts: 180
|
Re: triangulated 4 link installed
Sorry I forgot about pics. I started disassembly already but this is the passenger side link bar and how it's mounted
|
|
|
|
|
11-17-2014, 12:34 AM
|
#8 |
|
Registered User
Join Date: Feb 2012
Location: Sandy Eggo, CA
Posts: 183
|
Re: triangulated 4 link installed
Here are a couple of pics of a triangulated link. This is on my Ranger.. On my Blazer we are going to go with more of a wishbone link but it does the same thing, it keeps the axle centered.
  
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
