The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-02-2024, 06:18 PM   #1
Dennisch
Registered User
 
Join Date: Jul 2014
Location: Hilversum
Posts: 1
C15/C25 rotor question.

Hi there,

I have a 1976 GMC Sierra Classic 1500, which I've converted to 8 lug wheels. By doing so I lost my drop spindles and now I've decided that it needs to go low again. Are the rotors, wheel bearings and spindles (shafts) all the same on the 2500 models from 73-87? I have no clue where my front suspension came from as the seller had no idea either and he mentioned that there is a difference in the spindles, but all I can find is a difference in the spindles on the C10 models with the different rotor thickness, 1" v 1.25".

I need to make sure that I get the correct spindles as I'm in the Netherlands and I need to have them shipped from the States, and if I get the wrong set it's a waste of quite a bit of money.

I found the Western Chassis spindles but they don't mention anything about the rotors.

Thanks in advance.
Dennisch is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:37 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com