1967 GMC Spicer and 4x4 Decal Locations - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Vintage Windmills · 03-24-2018, 05:40 PM

There are 2 67 GMC K1500's here. The fremont built one has the Spicer sticker on the glovebox door and 4x4 pattern on the roof while the Pontiac built one has both it on the visor. Here is the evidence. Jmader and I are curious what other 67 GMC owners have for locations.

arcticman · 03-24-2018, 06:18 PM

Well my 67 k1500 SWB is a Fremont truck. It has nothing in the glovebox or on the outer glovebox door. Here is a photo. I notice that your 1ST photo lists a "power-loc diff. and dana hub locks. my photo shows Warn hub info label. I'm curious to know if some of the trucks came with Warn hubs? If you look at my photo close the info label is under the visor hook.

**jmader** · 03-25-2018, 10:00 AM

These are interesting thanks for starting the thread Jud. Mine only had the sticker above the rear view mirror and nothing on the glove box.

I’m pretty sure the 67’s all came with spicer locking hubs

Vintage Windmills · 03-25-2018, 01:39 PM

Arctic man, thanks for adding pics and info. Is the label just under the edge or is it secured by the visor hook? As far as I know, theres no literature suggesting the factory used Warn hubs.

Jeremy, where was your truck built originally?

**jmader** · 03-25-2018, 01:48 PM

Quote:

Originally Posted by Vintage Windmills

Arctic man, thanks for adding pics and info. Is the label just under the edge or is it secured by the visor hook? As far as I know, theres no literature suggesting the factory used Warn hubs.

Jeremy, where was your truck built originally?

Mine is a Pontiac truck

arcticman · 03-25-2018, 02:08 PM

Vintage Windmills,
The Warn info label is just under the lip of the visor and could have been placed afterward. That said it would be difficult to peel the back of the label and place it under the edge. (not impossible). Just not practial. I guess it could have been done at the dealer. but why would the dealer change out factory lockers?

**68SWB4x4** · 03-25-2018, 02:51 PM

Mine is a 1968 GMC Suburban built in fremont

Vintage Windmills · 03-26-2018, 12:46 AM

arcticman, lockout hubs were an option in 67-72's. It was definitely the rarity not to have them as a factory installed option though. My ochre 71 K20 still had the factory driveplates on it when I bought it a few years ago. Needless to say the front axle and transfer case ouput were worn a bit.

arcticman · 03-26-2018, 12:52 AM

Ok, so more than likley they did not have lockouts and were just a close off cap? then maybe the dealer would have installed them or the owner. I dont think the owner would have installed the decal if he knew enough to install the warns.

**special-K** · 03-26-2018, 06:57 AM

Were the stickers installed in production or were they supplied with the other literature to be installed by dealer or owners? I know that was the case with at least some '69s. Any brand truck that came with Dana front axle (which was all) would have Spicer hubs as an option. Dana/Spicer, same company supplying hubs that supplied the axle.

**jmader** · 03-26-2018, 07:32 AM

Quote:

Originally Posted by arcticman

Well my 67 k1500 SWB is a Fremont truck. It has nothing in the glovebox or on the outer glovebox door. Here is a photo. I notice that your 1ST photo lists a "power-loc diff. and dana hub locks. my photo shows Warn hub info label. I'm curious to know if some of the trucks came with Warn hubs? If you look at my photo close the info label is under the visor hook.

I bet your passenger visor was added later on and that's why the sticker is underneath the clip.

**jmader** · 03-26-2018, 07:34 AM

Quote:

Originally Posted by special-K

Were the stickers installed in production or were they supplied with the other literature to be installed by dealer or owners? I know that was the case with at least some '69s. Any brand truck that came with Dana front axle (which was all) would have Spicer hubs as an option. Dana/Spicer, same company supplying hubs that supplied the axle.

That's an interesting question. I always just assumed they were installed at the factory but they very easily could be dealer installed since the locations are different from truck to truck.

**special-K** · 03-27-2018, 07:24 AM

That's what I've always assumed, because I've had trucks where the unused stickers are still in the pamphlet packet in the glovebox.

outfield · 03-27-2018, 03:02 PM

Warn guy here, I just checked with a couple other old timers to make sure. The M-8 hubs on arcticmans truck were not a factory option. They would have been purchased as an aftermarket hub kit and either installed by the dealer or the owner. This is the first time I have seen a picture of an M-8 hub, its really cool to see the old style hubs with the real brass dials!

I'm looking for a set of M-7's for my K20...

Steve

outfield · 03-27-2018, 03:04 PM

And by the way, my '69 K20 built at Freemont has the 4x4 shift pattern sticker above the rearview mirror like the '67 GMC 1500 built at Freemont.

03-24-2018, 05:40 PM	#1
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	1967 GMC Spicer and 4x4 Decal Locations There are 2 67 GMC K1500's here. The fremont built one has the Spicer sticker on the glovebox door and 4x4 pattern on the roof while the Pontiac built one has both it on the visor. Here is the evidence. Jmader and I are curious what other 67 GMC owners have for locations. Attached Images __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

03-24-2018, 06:18 PM	#2
arcticman Registered User Join Date: Feb 2018 Location: ANCHORAGE Posts: 135	Re: 1967 GMC Spicer and 4x4 Decal Locations Well my 67 k1500 SWB is a Fremont truck. It has nothing in the glovebox or on the outer glovebox door. Here is a photo. I notice that your 1ST photo lists a "power-loc diff. and dana hub locks. my photo shows Warn hub info label. I'm curious to know if some of the trucks came with Warn hubs? If you look at my photo close the info label is under the visor hook. Attached Images

03-25-2018, 10:00 AM	#3
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,485	Re: 1967 GMC Spicer and 4x4 Decal Locations These are interesting thanks for starting the thread Jud. Mine only had the sticker above the rear view mirror and nothing on the glove box. I’m pretty sure the 67’s all came with spicer locking hubs __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

03-25-2018, 01:39 PM	#4
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: 1967 GMC Spicer and 4x4 Decal Locations Arctic man, thanks for adding pics and info. Is the label just under the edge or is it secured by the visor hook? As far as I know, theres no literature suggesting the factory used Warn hubs. Jeremy, where was your truck built originally? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

03-25-2018, 02:08 PM	#6
arcticman Registered User Join Date: Feb 2018 Location: ANCHORAGE Posts: 135	Re: 1967 GMC Spicer and 4x4 Decal Locations Vintage Windmills, The Warn info label is just under the lip of the visor and could have been placed afterward. That said it would be difficult to peel the back of the label and place it under the edge. (not impossible). Just not practial. I guess it could have been done at the dealer. but why would the dealer change out factory lockers?

03-25-2018, 02:51 PM	#7
68SWB4x4 Strongman Garage Join Date: Apr 2000 Location: Salinas, CA Posts: 10,241	Re: 1967 GMC Spicer and 4x4 Decal Locations Mine is a 1968 GMC Suburban built in fremont __________________ Kalle 68 GMC Suburban 1500 4x4 SOLD 69 Pontiac Lemans 99 Silverado 4.8 5 speed ECSB [ Facebook Instagram Subscribe on YOUTUBE

03-26-2018, 12:46 AM	#8
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: 1967 GMC Spicer and 4x4 Decal Locations arcticman, lockout hubs were an option in 67-72's. It was definitely the rarity not to have them as a factory installed option though. My ochre 71 K20 still had the factory driveplates on it when I bought it a few years ago. Needless to say the front axle and transfer case ouput were worn a bit. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

03-26-2018, 12:52 AM	#9
arcticman Registered User Join Date: Feb 2018 Location: ANCHORAGE Posts: 135	Re: 1967 GMC Spicer and 4x4 Decal Locations Ok, so more than likley they did not have lockouts and were just a close off cap? then maybe the dealer would have installed them or the owner. I dont think the owner would have installed the decal if he knew enough to install the warns.

03-26-2018, 06:57 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 1967 GMC Spicer and 4x4 Decal Locations Were the stickers installed in production or were they supplied with the other literature to be installed by dealer or owners? I know that was the case with at least some '69s. Any brand truck that came with Dana front axle (which was all) would have Spicer hubs as an option. Dana/Spicer, same company supplying hubs that supplied the axle. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-27-2018, 07:24 AM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 1967 GMC Spicer and 4x4 Decal Locations That's what I've always assumed, because I've had trucks where the unused stickers are still in the pamphlet packet in the glovebox. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-27-2018, 03:02 PM	#14
outfield Registered User Join Date: Apr 2016 Location: Portland, Or Posts: 387	Re: 1967 GMC Spicer and 4x4 Decal Locations Warn guy here, I just checked with a couple other old timers to make sure. The M-8 hubs on arcticmans truck were not a factory option. They would have been purchased as an aftermarket hub kit and either installed by the dealer or the owner. This is the first time I have seen a picture of an M-8 hub, its really cool to see the old style hubs with the real brass dials! I'm looking for a set of M-7's for my K20... Steve

03-27-2018, 03:04 PM	#15
outfield Registered User Join Date: Apr 2016 Location: Portland, Or Posts: 387	Re: 1967 GMC Spicer and 4x4 Decal Locations And by the way, my '69 K20 built at Freemont has the 4x4 shift pattern sticker above the rearview mirror like the '67 GMC 1500 built at Freemont.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.