PA 72 blazer 4-spd CST part out

[1rippen6]

Originally Posted by 6768chevylover

Do you have a lot in Carlisle? Are you bringing parts for sale or just for customers?

No spot this time, I just plan on bringing anything if someone wants to meet up.

[K5 MAX]

Interested in this area, inside the blue tape on the passenger side if its not roached out under the top
[IMG]123

[1rippen6]

Originally Posted by K5 MAX

Interested in this area, inside the blue tape on the passenger side if its not roached out under the top
[IMG]123

Ok, the plan is to take the top off this weekend so I should know.

[K5 MAX]

Originally Posted by 1rippen6

Ok, the plan is to take the top off this weekend so I should know.

Sounds good sir, add pics if it still good. Thank you!

[6768chevylover]

I'm looking for a good pair of 52" rear springs and a good passenger side door? Got any?!

[Another 72]

Originally Posted by 1rippen6

Looks like 10 for shipping

Thanks! It came yesterday afternoon, and it cleaned up real nice! Money well-spent!

[1rippen6]

Originally Posted by CHEVY_DUDE

Still interested in the stainless top hold down strips once you're able to get to them. Thanks.

Sorry, it took so long. They are painted black but should clean up nice 200 plus shipping with correct "P" stamped bolts or 180 plus shipping without the bolts

[1rippen6]

Originally Posted by 6768chevylover

I'm looking for a good pair of 52" rear springs and a good passenger side door? Got any?!

Sorry, no doors I actually have to buy a passenger side at Carlisle. I have rear springs but as far as being good I can tell you they won't have any broken plies. They could sti sag like most of them do lol.

[1rippen6]

Originally Posted by Another 72

Thanks! It came yesterday afternoon, and it cleaned up real nice! Money well-spent!

Good to hear!!! Is it going to work like you hoped it would.

[6768chevylover]

Okay! Thanks for the info.. I'll pass on the springs but, do you happen to have a rear drive shaft for a sm465/np205 combo?

[1rippen6]

Originally Posted by 6768chevylover

Okay! Thanks for the info.. I'll pass on the springs but, do you happen to have a rear drive shaft for a sm465/np205 combo?

Sorry, the only one I have I'm going to try and sell with the tranny. If that doesn't happen I'll let you know.

[lks dcvn]

How is the passenger side floor - I'm looking for the brace (under the floor) that the latch bolts into?

Also - how is the bucket seat brace that is under the floor?

Thanks.

[1rippen6]

Originally Posted by lks dcvn

How is the passenger side floor - I'm looking for the brace (under the floor) that the latch bolts into?

Also - how is the bucket seat brace that is under the floor?

Thanks.

I will look at the passenger side brace, guessing it will be in the same shape as the seat channel rough. Did you see the guy on the truck side making the seat channel, they look nice.

[Bigk5]

Is the rear hatch with lock and mechanisms available

[Bigk5]

Looking for rear hatch with lock and mechanisms and brackets willing to pay500 for complete hatch

[1rippen6]

When you say lock do you mean the handle with the lock cylinder or the latches on each end of the hatch.

[CHEVY_DUDE]

Going to pass on the top hold down strips. A buddy of mine had an extra set. Thanks

[Bigk5]

I was needing a complete hatch with latches internal rods latches on ends all parts to make hatch lockable thanks for quick respons

[1rippen6]

I have a couple hatches, do you want a nice one that needs a little work or one that needs more work.

[Bigk5]

I would like to get one that has all the parts on it that have to do with lock internal hardware rods cover plates latches bumpers and if possible the two brackets that latches latch on to I don't need the whole hatch I have a good one but there is no parts on it just hinges I will pay for whole hatch if complete

[Bigk5]

If you can remove all of the parts to complete the rear hatch I have I will be willing to pay 350 if you don't want to do it that way I understand thanks I have been looking for a couple of years I am so happy that you do what you do thanks

[1rippen6]

Originally Posted by Bigk5

If you can remove all of the parts to complete the rear hatch I have I will be willing to pay 350 if you don't want to do it that way I understand thanks I have been looking for a couple of years I am so happy that you do what you do thanks

Let me see what I have tomorrow, none have the handles. I removed them and had them rekeyed and chrome plated. I sell them for 250 but you can go to lowes or home depot and pick up a garage door handle for around 15. I'm sure between all of them I should be able to get everything.

[Bigk5]

A complete hatch will work for me also. I am post happy it's like I struck gold

[Bigk5]

Sound good I will be waiting

[1rippen6]

Originally Posted by bigk5

a complete hatch will work for me also. I am post happy it's like i struck gold

lol