MD Blazer windshield frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**richard2717** · 03-11-2020, 08:22 PM

There are a few holes on top passenger side but the rest of it is solid. This is for only the frame nothing else on the firewall/dash area unless negotiated. I will be pulling all of the dash components and listing them tomorrow.

$400 plus shipping which will depend on how much pillar you want left attached.

EDIT: Just to be clear, this is only for the windshield frame. I am keeping the outer cowl and the lower firewall is toast.

Windshield frame is SOLD
.

**richard2717** · 03-11-2020, 08:23 PM

more pics

.

Ctgry5 · 03-11-2020, 09:05 PM

I’m interested, any rough idea what shipping would cost to 33811??

**richard2717** · 03-11-2020, 09:11 PM

Quote:

Originally Posted by Ctgry5

I’m interested, any rough idea what shipping would cost to 33811??

How much of the vertical posts do you need? PM me your full address and let me know how much post and I will get cost tomorrow

Ctgry5 · 03-11-2020, 09:27 PM

My bodywork man says right above the top of door hinge please... I’ll message you address...

**richard2717** · 03-11-2020, 09:40 PM

Ok will PM you tomorrow with shipping costs
Thanks

**richard2717** · 03-12-2020, 08:56 AM

Sent PM with shipping cost options

**richard2717** · 03-12-2020, 01:09 PM

Still available

**richard2717** · 03-14-2020, 09:04 AM

some more pics now that i have it stripped down more

.

**richard2717** · 03-14-2020, 09:12 AM

some more pics now that i have it stripped down more

.

twp1 · 03-18-2020, 08:20 PM

can you take photos of the front floor area?

**richard2717** · 03-18-2020, 08:35 PM

Quote:

Originally Posted by twp1

can you take photos of the front floor area?

I can get some but it is rotten all across the lower area. Will post them in the morning.

**richard2717** · 03-19-2020, 08:42 AM

Quote:

Originally Posted by twp1

can you take photos of the front floor area?

here are pics of the lower, pretty rotten. I do have a non AC one that is real nice on the wall

.

**richard2717** · 03-19-2020, 08:43 AM

...

*randy500* · 03-19-2020, 11:51 AM

Richard, i need the ac flapper door cowl bushing and nut shown in picture 3 of post number 9.

*randy500* · 03-19-2020, 11:52 AM

I also need a 4wd vacuum pod bracket and a good plastic vac pod.

**richard2717** · 03-19-2020, 11:55 AM

Quote:

Originally Posted by randy500

Richard, i need the ac flapper door cowl bushing and nut shown in picture 3 of post number 9.

Randy
The shaft was broken off of the flapper and at the moment it is still stuck in the outer bracket. I have it sprayed with blaster trying to get it loosened up. Will let you know how I make out with that
RH

**richard2717** · 03-19-2020, 11:57 AM

Quote:

Originally Posted by randy500

I also need a 4wd vacuum pod bracket and a good plastic vac pod.

Have you got a pic of what you are talking about to make sure I am looking for the correct items? I don't get many with AC lol

*randy500* · 03-19-2020, 12:03 PM

Picture of ac vacuum pod bracket which mounts to outer ac box, on engine side.
I need the screws with it if possible.

*randy500* · 03-19-2020, 12:07 PM

Flap door layout and bushing which mounts through firewall with nut behind glovebox
The pictured bushing is cracked and part of it it missing

**richard2717** · 03-19-2020, 12:17 PM

I should have some. Give me a little while to get it all out

**richard2717** · 03-19-2020, 03:13 PM

Randy
Here is what I have. $150 shipped for everything. While I had the bracket off I went ahead and made a new one as well for a pattern but did not have proper thickness metal here. The original is in nice shape with very minor pitting. No cracks in either of the plastic pcs that i can see.

.

*randy500* · 03-19-2020, 03:38 PM

I only need the firewall bushing and the 4wd bracket and Pod, whats the price on those alone?

**richard2717** · 03-19-2020, 04:07 PM

$80 shipped

.

*randy500* · 03-19-2020, 04:16 PM

Money sent, thank you.

03-11-2020, 08:22 PM	#1
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,885	Blazer windshield frame There are a few holes on top passenger side but the rest of it is solid. This is for only the frame nothing else on the firewall/dash area unless negotiated. I will be pulling all of the dash components and listing them tomorrow. $400 plus shipping which will depend on how much pillar you want left attached. EDIT: Just to be clear, this is only for the windshield frame. I am keeping the outer cowl and the lower firewall is toast. Windshield frame is SOLD . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type. Last edited by richard2717; 04-12-2020 at 01:53 PM.

03-11-2020, 08:23 PM	#2
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,885	Re: Blazer windshield frame more pics . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

03-11-2020, 09:05 PM	#3
Ctgry5 Registered User Join Date: Jun 2013 Location: Homestead, Florida Posts: 60	Re: Blazer windshield frame I’m interested, any rough idea what shipping would cost to 33811??

03-11-2020, 09:27 PM	#5
Ctgry5 Registered User Join Date: Jun 2013 Location: Homestead, Florida Posts: 60	Re: Blazer windshield frame My bodywork man says right above the top of door hinge please... I’ll message you address...

03-11-2020, 09:40 PM	#6
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,885	Re: Blazer windshield frame Ok will PM you tomorrow with shipping costs Thanks __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

03-12-2020, 08:56 AM	#7
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,885	Re: Blazer windshield frame Sent PM with shipping cost options __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

03-12-2020, 01:09 PM	#8
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,885	Re: Blazer windshield frame Still available __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

03-14-2020, 09:04 AM	#9
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,885	Re: Blazer windshield frame some more pics now that i have it stripped down more . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

03-14-2020, 09:12 AM	#10
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,885	Re: Blazer windshield frame some more pics now that i have it stripped down more . __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

03-18-2020, 08:20 PM	#11
twp1 Registered User Join Date: Aug 2014 Location: Arkansas Posts: 351	Re: Blazer windshield frame can you take photos of the front floor area?

03-19-2020, 08:43 AM	#14
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,885	Re: Blazer windshield frame ... Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

03-19-2020, 11:51 AM	#15
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Blazer windshield frame Richard, i need the ac flapper door cowl bushing and nut shown in picture 3 of post number 9.

03-19-2020, 11:52 AM	#16
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Blazer windshield frame I also need a 4wd vacuum pod bracket and a good plastic vac pod.

03-19-2020, 12:03 PM	#19
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Blazer windshield frame Picture of ac vacuum pod bracket which mounts to outer ac box, on engine side. I need the screws with it if possible. Attached Images

03-19-2020, 12:07 PM	#20
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Blazer windshield frame Flap door layout and bushing which mounts through firewall with nut behind glovebox The pictured bushing is cracked and part of it it missing Attached Images



Register or Log In To remove these advertisements.

03-19-2020, 12:17 PM	#21
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,885	Re: Blazer windshield frame I should have some. Give me a little while to get it all out __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

03-19-2020, 03:13 PM	#22
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,885	Re: Blazer windshield frame Randy Here is what I have. $150 shipped for everything. While I had the bracket off I went ahead and made a new one as well for a pattern but did not have proper thickness metal here. The original is in nice shape with very minor pitting. No cracks in either of the plastic pcs that i can see. . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

03-19-2020, 03:38 PM	#23
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Blazer windshield frame I only need the firewall bushing and the 4wd bracket and Pod, whats the price on those alone?

03-19-2020, 04:07 PM	#24
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,885	Re: Blazer windshield frame $80 shipped . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

03-19-2020, 04:16 PM	#25
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Blazer windshield frame Money sent, thank you.

Register or Log In To remove these advertisements.