OR Serpentine belt conversions - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ms2335** · 05-03-2014, 09:10 PM

Tried to PM you about the serpentine system that you said might be ready in a couple of weeks. Still interested

**tll74** · 05-05-2014, 01:30 AM

Quote:

Originally Posted by ms2335

Tried to PM you about the serpentine system that you said might be ready in a couple of weeks. Still interested

My PM box was full. I have it thinned down now so please try again. Thanks, Tom

**ms2335** · 05-05-2014, 08:29 AM

PM sent

esoxman308 · 06-04-2014, 10:27 AM

PM request for detailed kit (71 4x4 w/350), minus A/C, but with ilder pully if you have one, bracket with no smog, also will need the water neck if you have that available as well. If your out, please place me on the waiting list....Thank You..Lee

jpwright10 · 06-05-2014, 10:28 PM

Hey guys great thread! I have a 72 current setup is later with alternator on right R4 a/c compressor on left. Is there any magic or particular reasoning on which serpentine setup(right or left a/c comp.) is best?

True 67 · 06-06-2014, 10:15 AM

i'm luving this kit!!! i just bought a GM Performance crate engine as my '71 had nothing so i will need the entire setup. My truck isn't a AC truck but Vintage will be in the plans down the road. How much for teh setup shipped to 30168?

True

**tll74** · 06-07-2014, 01:48 AM

Quote:

Originally Posted by True 67

i'm luving this kit!!! i just bought a GM Performance crate engine as my '71 had nothing so i will need the entire setup. My truck isn't a AC truck but Vintage will be in the plans down the road. How much for teh setup shipped to 30168?

True

300.00 shipped. Which engine did you buy? These will not fit the ZZ4. Thanks, Tom

**tll74** · 06-07-2014, 01:51 AM

Quote:

Originally Posted by esoxman308

PM request for detailed kit (71 4x4 w/350), minus A/C, but with ilder pully if you have one, bracket with no smog, also will need the water neck if you have that available as well. If your out, please place me on the waiting list....Thank You..Lee

Lee, PM sent

True 67 · 06-08-2014, 01:14 AM

Tom,
I bought the base model 350 / 260hp engine for $1199 whike they had it on sale..

True

**tll74** · 06-08-2014, 01:21 AM

Quote:

Originally Posted by True 67

Tom,
I bought the base model 350 / 260hp engine for $1199 whike they had it on sale..

True

Ok...no problem it will fit just fine.

Lee H · 06-11-2014, 02:17 PM

Any issues running the stock fan shroud with this swap, either AC or non-AC shroud? I installed a serpentine system about 10 years ago with electric fans. I'm getting tired of relays and fan motors going out so I'm going with a clutch fan and shroud. I have the correct fan & clutch, I now need to source a shroud that will fit.

Bryan H · 06-11-2014, 10:23 PM

PM sent.

Jb70c10 · 06-13-2014, 07:04 AM

Quote:

Originally Posted by Lee H

Any issues running the stock fan shroud with this swap, either AC or non-AC shroud? I installed a serpentine system about 10 years ago with electric fans. I'm getting tired of relays and fan motors going out so I'm going with a clutch fan and shroud. I have the correct fan & clutch, I now need to source a shroud that will fit.

Same deal here. My factory 70 model shroud is to small for the factory late model fan. Fan and shroud opening both measure 19 1/2" diameter. What shroud do I need for the serpentine set up to work?

calvin78612 · 06-17-2014, 07:11 AM

Sbc setup, shipping to 76008.

**tll74** · 06-19-2014, 02:10 AM

Quote:

Originally Posted by Jb70c10

Same deal here. My factory 70 model shroud is to small for the factory late model fan. Fan and shroud opening both measure 19 1/2" diameter. What shroud do I need for the serpentine set up to work?

I'm not really sure what buyers have been doing about shrouds. You may want to send some PM's to other guys that have done the conversion. I do know that some have used electric fans.

Quote:

Originally Posted by calvin78612

Sbc setup, shipping to 76008.

Shipping is 75.00

Thanks, Tom

Dirt_Baller · 07-13-2014, 09:15 PM

Can you set one with alternator ,crank, long water pump and power steering with idler? Shipped to 78234. I have electric fans so no need for anything but the pulley for the water pump.

**tll74** · 07-18-2014, 12:54 AM

Quote:

Originally Posted by Dirt_Baller

Can you set one with alternator ,crank, long water pump and power steering with idler? Shipped to 78234. I have electric fans so no need for anything but the pulley for the water pump.

I'm kinda confused. Do you want a conversion with only the items you listed? Or a complete set up less the fan and clutch?

Aaronsk5 · 07-25-2014, 07:07 PM

Im looking for a sbc serpentine set up with a 134 compressor. Will you pm me with a total going to 98146

DrawDown · 07-29-2014, 11:54 PM

I'm looking for a complete SBC setup using an r134 compressor. Can you PM me a price shipped to 77386? Detailed as well. Thanks!

**tll74** · 07-31-2014, 02:05 AM

Quote:

Originally Posted by Aaronsk5

Im looking for a sbc serpentine set up with a 134 compressor. Will you pm me with a total going to 98146

Quote:

Originally Posted by DrawDown

I'm looking for a complete SBC setup using an r134 compressor. Can you PM me a price shipped to 77386? Detailed as well. Thanks!

PM's sent to both of you guys, Thanks, Tom

**TBONE1964** · 08-01-2014, 02:25 PM

Bump

TobyArnot · 08-01-2014, 03:37 PM

Aren't the R4 compressor all made for Freon? Based on some advise from a friend at Vintage Air, I flushed my compressor and used it with 134. Vintage also makes a conversion kit with brackets for a Sanden compressor with a serpentine pulley, Straight swap, just more $$$

67stepside · 08-13-2014, 08:44 PM

Hi, I was wondering if you still had any small block kits? I have a 68 327. The right head does have 1 mounting hole in it. Left has 2. Will this work? I need a kit with no a/c compressor and no smog pump. Will my stock fan shroud work?What would the price be with shipping to 47203? Thanks

**tll74** · 08-22-2014, 01:40 AM

Quote:

Originally Posted by TobyArnot

Aren't the R4 compressor all made for Freon? Based on some advise from a friend at Vintage Air, I flushed my compressor and used it with 134. Vintage also makes a conversion kit with brackets for a Sanden compressor with a serpentine pulley, Straight swap, just more $$$

Yup if you flush the system the pump won't care if it has R12 or R134.

Quote:

Originally Posted by 67stepside

Hi, I was wondering if you still had any small block kits? I have a 68 327. The right head does have 1 mounting hole in it. Left has 2. Will this work? I need a kit with no a/c compressor and no smog pump. Will my stock fan shroud work?What would the price be with shipping to 47203? Thanks

Your 327 has later heads on it so these conversions will work just fine. I can do the conversion as asked. As for the shroud I'm not sure. Many members in this thread have bought one so you may consider asking them. 200.00 for the conversion less the AC pump and with a idler to take the place of the pump. 70.00 shipping. Thanks, Tom

03glide · 08-22-2014, 08:45 AM

I would like the complete kit. Pricing to 28405 and how you would like to be paid.

sbc. cleaned no detail.

05-03-2014, 09:10 PM	#201
ms2335 Senior Member Join Date: Jan 2009 Location: glenmora. la Posts: 290	Re: Serpentine belt conversions Tried to PM you about the serpentine system that you said might be ready in a couple of weeks. Still interested __________________ 65 Chevy C10 Short Fleet BBW 6.0L/4l80E 68 Chevy C10 SWB 6.0L/4L80E 84 Chevy C10 SWB 5.3/4l60E QA1 Suspension

05-05-2014, 08:29 AM	#203
ms2335 Senior Member Join Date: Jan 2009 Location: glenmora. la Posts: 290	Re: Serpentine belt conversions PM sent __________________ 65 Chevy C10 Short Fleet BBW 6.0L/4l80E 68 Chevy C10 SWB 6.0L/4L80E 84 Chevy C10 SWB 5.3/4l60E QA1 Suspension

06-04-2014, 10:27 AM	#204
esoxman308 Registered User Join Date: May 2014 Location: Glenburn, ND Posts: 34	Re: Serpentine belt conversions PM request for detailed kit (71 4x4 w/350), minus A/C, but with ilder pully if you have one, bracket with no smog, also will need the water neck if you have that available as well. If your out, please place me on the waiting list....Thank You..Lee

06-05-2014, 10:28 PM	#205
jpwright10 Registered User Join Date: May 2013 Location: Yakima, WA Posts: 14	Re: Serpentine belt conversions Hey guys great thread! I have a 72 current setup is later with alternator on right R4 a/c compressor on left. Is there any magic or particular reasoning on which serpentine setup(right or left a/c comp.) is best?

06-06-2014, 10:15 AM	#206
True 67 Registered User Join Date: Sep 2010 Location: Austell, Ga Posts: 151	Re: Serpentine belt conversions i'm luving this kit!!! i just bought a GM Performance crate engine as my '71 had nothing so i will need the entire setup. My truck isn't a AC truck but Vintage will be in the plans down the road. How much for teh setup shipped to 30168? True

06-08-2014, 01:14 AM	#209
True 67 Registered User Join Date: Sep 2010 Location: Austell, Ga Posts: 151	Re: Serpentine belt conversions Tom, I bought the base model 350 / 260hp engine for $1199 whike they had it on sale.. True

06-11-2014, 02:17 PM	#211
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,139	Re: Serpentine belt conversions Any issues running the stock fan shroud with this swap, either AC or non-AC shroud? I installed a serpentine system about 10 years ago with electric fans. I'm getting tired of relays and fan motors going out so I'm going with a clutch fan and shroud. I have the correct fan & clutch, I now need to source a shroud that will fit. __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

06-11-2014, 10:23 PM	#212
Bryan H Registered User Join Date: Jul 2002 Location: Chesnee SC Posts: 254	Re: Serpentine belt conversions PM sent. __________________ 1980 Malibu Classic 2 dr coupe 1964 Impala SS 4 speed 1968 GMC (major project) grandpa bought new 1969 Chevrolet C-10 Shortbed Fleetside 2008 GMC Canyon (daily driver)

06-17-2014, 07:11 AM	#214
calvin78612 Registered User Join Date: Mar 2010 Location: Aledo, Texas Posts: 803	Re: Serpentine belt conversions Sbc setup, shipping to 76008. __________________ 84 step side 87 swb

07-13-2014, 09:15 PM	#216
Dirt_Baller Registered User Join Date: Feb 2014 Location: Ft Campbell Posts: 82	Re: Serpentine belt conversions Can you set one with alternator ,crank, long water pump and power steering with idler? Shipped to 78234. I have electric fans so no need for anything but the pulley for the water pump.

07-25-2014, 07:07 PM	#218
Aaronsk5 Registered User Join Date: Jul 2014 Location: Burien Wa Posts: 3	Re: Serpentine belt conversions Im looking for a sbc serpentine set up with a 134 compressor. Will you pm me with a total going to 98146

07-29-2014, 11:54 PM	#219
DrawDown Registered User Join Date: Jul 2014 Location: Houston, Tx Posts: 23	Re: Serpentine belt conversions I'm looking for a complete SBC setup using an r134 compressor. Can you PM me a price shipped to 77386? Detailed as well. Thanks!

08-01-2014, 02:25 PM	#221
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: Serpentine belt conversions Bump __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

08-01-2014, 03:37 PM	#222
TobyArnot Quit if it's not FUN!!! Join Date: Jul 2010 Location: Indian Trail, N.C, Posts: 864	Re: Serpentine belt conversions Aren't the R4 compressor all made for Freon? Based on some advise from a friend at Vintage Air, I flushed my compressor and used it with 134. Vintage also makes a conversion kit with brackets for a Sanden compressor with a serpentine pulley, Straight swap, just more $$$

08-13-2014, 08:44 PM	#223
67stepside Registered User Join Date: Jan 2002 Location: Columbus, IN. USA Posts: 140	Re: Serpentine belt conversions Hi, I was wondering if you still had any small block kits? I have a 68 327. The right head does have 1 mounting hole in it. Left has 2. Will this work? I need a kit with no a/c compressor and no smog pump. Will my stock fan shroud work?What would the price be with shipping to 47203? Thanks



Register or Log In To remove these advertisements.

08-22-2014, 08:45 AM	#225
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	Re: Serpentine belt conversions I would like the complete kit. Pricing to 28405 and how you would like to be paid. sbc. cleaned no detail.

Register or Log In To remove these advertisements.