Ez-Wiring help with ignition hook-up

[landarts]

I have the mini-21 EZ-Wiring kit that I am trying to hookup. I did do several searches and found some good pointers. I am having trouble with the ignition switch hook-up. I do have a HEi distributor installed. This is for a 72 with a 350 V8.

In the kit it has the following wires marked and their colors:

• Ign Switch power - Red with black pigtail coming off the side
• Ign Switch start - purple
• Ign Switch coil - pink
• Ign Switch ACC - orange
• Ign Switch IGN - brown

On the back of the switch it has the following post:

• Acc
• Sol
• Ign
• Bat
• G-1
• G-2

Im a little or maybe a lot confused on getting this right. Here is what I think from the schematic:

• Acc gets the orange wire marked "Ign switch ACC"
• Bat gets the red wire marked "ign switch power"
• Ign gets the brown wire marked "Ign switch Ign"
• Not sure on the (purple wire marked "Ign switch start" and the pink wire marked " Ign switch coil" )

If I am good on the first three, where do I put the purple and pink wires ? Also what do I do with the black pigtail coming off of the red power wire?