Hello - 64 C20 in Papillion, NE - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Raszaron · 03-12-2016, 03:10 PM

Hello everyone, name is Chris but I go by Dirk.

I am just getting back into the old Chevy game and I am starting off with something that I am not all that familiar with, a 1964 Chevrolet C20.

It currently has a 350 and 4 on the floor (with granny low). I haven't pulled the numbers off of the rear end yet, but I am thinking it is at least 4.11.

I know it is a 3/4 ton and this is where it will possibly become tricky at completing this build as it has already had a lot of work done to it.

Things on my list:
1. Remove and relocate gas tank from cab to under the bed, finish work on Cab supports, and add a harness bar w/ harnesses.
2. Adding the Retro style EFI system (already have one)
3. Upgrading the suspension and brakes - HERE'S WHERE I WILL NEED ADVICE!
- I want to convert to all disc brakes and change from 8 lug to 5 lug
4. Swap out the 4spd and Rear end for something more highway friendly!
- T5 and rear end with 3.73.

Raszaron · 03-12-2016, 03:11 PM

I hate my Iphone! It saves pictures upside down... I will have to find a site that will revert the pictures.

Raszaron · 03-12-2016, 04:30 PM

**rustytruck50** · 07-08-2018, 01:03 AM

Hey Dirk....I just found this post back...how's the '64 coming along?

03-12-2016, 03:10 PM	#1
Raszaron Registered User Join Date: Mar 2016 Location: Papillion, NE Posts: 14	Hello - 64 C20 in Papillion, NE Hello everyone, name is Chris but I go by Dirk. I am just getting back into the old Chevy game and I am starting off with something that I am not all that familiar with, a 1964 Chevrolet C20. It currently has a 350 and 4 on the floor (with granny low). I haven't pulled the numbers off of the rear end yet, but I am thinking it is at least 4.11. I know it is a 3/4 ton and this is where it will possibly become tricky at completing this build as it has already had a lot of work done to it. Things on my list: 1. Remove and relocate gas tank from cab to under the bed, finish work on Cab supports, and add a harness bar w/ harnesses. 2. Adding the Retro style EFI system (already have one) 3. Upgrading the suspension and brakes - HERE'S WHERE I WILL NEED ADVICE! - I want to convert to all disc brakes and change from 8 lug to 5 lug 4. Swap out the 4spd and Rear end for something more highway friendly! - T5 and rear end with 3.73. Attached Images

03-12-2016, 03:11 PM	#2
Raszaron Registered User Join Date: Mar 2016 Location: Papillion, NE Posts: 14	Re: Hello - 64 C20 in Papillion, NE I hate my Iphone! It saves pictures upside down... I will have to find a site that will revert the pictures.

03-12-2016, 04:30 PM	#3
Raszaron Registered User Join Date: Mar 2016 Location: Papillion, NE Posts: 14	Re: Hello - 64 C20 in Papillion, NE

07-08-2018, 01:03 AM	#4
rustytruck50 Senior Member Join Date: Feb 2011 Location: Papillion, Ne Posts: 897	Re: Hello - 64 C20 in Papillion, NE Hey Dirk....I just found this post back...how's the '64 coming along? __________________ -Doug '05 RCSB Sierra 2WD '71 Sierra 2WD Longbed '98 Silverado K1500 Xcab...sold '72 Highlander"Raymond"...sold



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.