OH K5 part out with in-line six - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rayray767 · 07-15-2018, 06:55 PM

Not sure when I’m going to be able to get to this project but I’m going to be parting this thing out. It has an in-line six starts and runs & drives . All the body panels on it are shot but there are a few usable parts . Just let me know what you might be interested in

rayray767 · 07-15-2018, 06:58 PM

Here are some more pics

**craneboy72** · 07-15-2018, 07:26 PM

Subscribe

**too much stuff** · 07-15-2018, 07:46 PM

Top hold downs and spare tire carrier prices.
Front seat with brackets also.

wwjd-5-2 · 07-15-2018, 07:58 PM

Spare tire carrier, gas filler cover, and seats

Newtynewt · 07-15-2018, 07:59 PM

Steering wheel please.
Posted via Mobile Device
And second in line for spare tire carrier.

**MikeCofield** · 07-15-2018, 08:05 PM

Any leveling mats

**a1vintage69** · 07-15-2018, 09:10 PM

Ray, do you have the jack, lug wrench and handle? first in line if available. a1

CrewCab59 · 07-15-2018, 09:53 PM

The complete air cleaner with hardware. What shape is the tailgate in?

Thanks

**4x41971SWB** · 07-15-2018, 10:17 PM

Condition and price on the complete hatch, top wire harness, sun visors, brakets from transfer case tp frame, and passenger seat belt.
Thanks

waylonbud · 07-15-2018, 10:40 PM

Also interested in complete hatch. Please put me 2nd in line.

**68350** · 07-15-2018, 10:44 PM

Interested in the tire carrier, front seat with brackets

**DeadheadNM** · 07-15-2018, 11:27 PM

I'd be interested in the rear brackets for the rear seat pending cost/condition and maybe the rear seat arm rests. Thanks. Pete

**rockc** · 07-15-2018, 11:28 PM

I interested in complete top with hatch>

NJKelly · 07-16-2018, 12:07 AM

I I'm interested in the spare tire carrier and the hatch. I'll be driving by you on the way back from Nebraska with a 72 ochre on July 30th. Making a few stops along the way four seats in a convertible top.

**jaybatta** · 07-16-2018, 12:27 AM

Million dollar question...tow hooks?

Early Rider Steve · 07-16-2018, 01:44 AM

Fuel filler neck, vent tube, and the quarter panel cuts for the fuel filler neck about 6" around.

tmontg01 · 07-16-2018, 05:21 AM

Interested in the single wall top wire harness and plate

GSD Guy · 07-16-2018, 07:04 AM

Very interested in rear seat arm rests with hardware to mount. Thanks!

**craneboy72** · 07-16-2018, 11:30 AM

If the rear bumper brackets are correct for a 71 and are not rusted bad I’ll take them pending price and condition

chevyguy_72 · 07-16-2018, 01:17 PM

Interested in the random hubcap in the back... looks like garage art to me...

**maldo** · 07-16-2018, 03:17 PM

I am interested in the hatch handle please give price and shipping to 94533. Thank you

kv63 · 07-16-2018, 04:12 PM

Hey Ray. In line for the spare tire carrier shipped to 90713. Thanks.

rayray767 · 07-17-2018, 05:45 PM

Just wanted to touch bases with everyone still at work this evening and going to my second shortly.. I’ve got to work Saturday but just a few hours . I’ll be in contact after that ...
thanks...
Ray

toomany2yz · 07-18-2018, 02:25 PM

Title? Price on what's left after everything is picked over?

07-15-2018, 06:55 PM	#1
rayray767 Registered User Join Date: Apr 2012 Location: Columbus Ohio Posts: 1,136	K5 part out with in-line six Not sure when I’m going to be able to get to this project but I’m going to be parting this thing out. It has an in-line six starts and runs & drives . All the body panels on it are shot but there are a few usable parts . Just let me know what you might be interested in Attached Images Last edited by rayray767; 07-15-2018 at 07:03 PM.

07-15-2018, 06:58 PM	#2
rayray767 Registered User Join Date: Apr 2012 Location: Columbus Ohio Posts: 1,136	Re: K5 part out with in-line six Here are some more pics Attached Images

07-15-2018, 07:26 PM	#3
craneboy72 Senior Member Join Date: Jun 2015 Location: Acton Ma Posts: 744	Re: K5 part out with in-line six Subscribe

07-15-2018, 07:46 PM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,692	Re: K5 part out with in-line six Top hold downs and spare tire carrier prices. Front seat with brackets also. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

07-15-2018, 07:58 PM	#5
wwjd-5-2 Registered User Join Date: Mar 2018 Location: Modesto, Cali. 95350 Posts: 191	Re: K5 part out with in-line six Spare tire carrier, gas filler cover, and seats

07-15-2018, 07:59 PM	#6
Newtynewt Registered User Join Date: Jan 2018 Location: Mooresville NC Posts: 287	Re: K5 part out with in-line six Steering wheel please. Posted via Mobile Device And second in line for spare tire carrier.

07-15-2018, 08:05 PM	#7
MikeCofield Senior Member Join Date: Dec 2010 Location: Eastaboga AL Posts: 4,913	Re: K5 part out with in-line six Any leveling mats

07-15-2018, 09:10 PM	#8
a1vintage69 Senior Member Join Date: Apr 2015 Location: Redding, Ca. Posts: 3,910	Re: K5 part out with in-line six Ray, do you have the jack, lug wrench and handle? first in line if available. a1

07-15-2018, 09:53 PM	#9
CrewCab59 Registered User Join Date: Jul 2010 Location: Knoxville,TN Posts: 1,191	Re: K5 part out with in-line six The complete air cleaner with hardware. What shape is the tailgate in? Thanks __________________ 1972 Custom Deluxe 20 4x4 burb 1971 GMC SWB CST 4x4 1972 GMC k20 4x4 (X- brush truck ) 1971 Chevy CST Blazer 4x4 1971 Chevy C/10 1970 Cab Chassis C30 157" 1971 Cab Chassis Custom 30 Deluxe 157" 292/4spd ( Napco Replica ) 1988 Chevy V30 4x4 wrecker challenger 4812

07-15-2018, 10:17 PM	#10
4x41971SWB Registered User Join Date: May 2016 Location: Escondido CA Posts: 571	Re: K5 part out with in-line six Condition and price on the complete hatch, top wire harness, sun visors, brakets from transfer case tp frame, and passenger seat belt. Thanks

07-15-2018, 10:40 PM	#11
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: K5 part out with in-line six Also interested in complete hatch. Please put me 2nd in line.

07-15-2018, 10:44 PM	#12
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: K5 part out with in-line six Interested in the tire carrier, front seat with brackets __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

07-15-2018, 11:27 PM	#13
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,280	Re: K5 part out with in-line six I'd be interested in the rear brackets for the rear seat pending cost/condition and maybe the rear seat arm rests. Thanks. Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

07-15-2018, 11:28 PM	#14
rockc Registered User Join Date: Jul 2007 Location: SE WY Posts: 633	Re: K5 part out with in-line six I interested in complete top with hatch> __________________ 72 chevy 3/4 ton 4X4

07-16-2018, 12:07 AM	#15
NJKelly Registered User Join Date: Mar 2018 Location: New Jersey Posts: 377	Re: K5 part out with in-line six I I'm interested in the spare tire carrier and the hatch. I'll be driving by you on the way back from Nebraska with a 72 ochre on July 30th. Making a few stops along the way four seats in a convertible top.



Register or Log In To remove these advertisements.

07-16-2018, 12:27 AM	#16
jaybatta Senior Member Join Date: Apr 2014 Location: Livingston, MT Posts: 834	Re: K5 part out with in-line six Million dollar question...tow hooks? __________________ Joe 1968 K20 1970 K20 Semper Fi

07-16-2018, 01:44 AM	#17
Early Rider Steve Registered User Join Date: Oct 2015 Location: Fort Mohave, Arizona Posts: 44	Re: K5 part out with in-line six Fuel filler neck, vent tube, and the quarter panel cuts for the fuel filler neck about 6" around. __________________ Steve 1971 Custom Deluxe pickup 1972 K-5 Blazer

07-16-2018, 05:21 AM	#18
tmontg01 Registered User Join Date: May 2015 Location: Sierra Vista, Arizona Posts: 391	Re: K5 part out with in-line six Interested in the single wall top wire harness and plate __________________ 1968 C10 SWB 400SBC with VN327 20's 1972 K5 Blazer 383SBC 2011 Cadillac CTSV

07-16-2018, 07:04 AM	#19
GSD Guy Registered User Join Date: Jul 2010 Location: Jacksonville, FL Posts: 85	Re: K5 part out with in-line six Very interested in rear seat arm rests with hardware to mount. Thanks!

07-16-2018, 11:30 AM	#20
craneboy72 Senior Member Join Date: Jun 2015 Location: Acton Ma Posts: 744	Re: K5 part out with in-line six If the rear bumper brackets are correct for a 71 and are not rusted bad I’ll take them pending price and condition

07-16-2018, 01:17 PM	#21
chevyguy_72 Vintage Evil Join Date: Aug 2005 Location: Broomfield, CO Posts: 956	Re: K5 part out with in-line six Interested in the random hubcap in the back... looks like garage art to me... __________________ Current Rides: Vintage Evil - 72 Chevy C10 (Always a work in progress) Vintage Evil Build Thread EvilK5 - 71 K5 Blazer Evil Twin - 2006 Suzuki M109R EvilDmax- 2018 GMC 2500 Denali Duramax

07-16-2018, 03:17 PM	#22
maldo Senior Member Join Date: Nov 2015 Location: cali Posts: 691	Re: K5 part out with in-line six I am interested in the hatch handle please give price and shipping to 94533. Thank you

07-16-2018, 04:12 PM	#23
kv63 Registered User Join Date: Nov 2017 Location: Lakewood, Ca Posts: 143	Re: K5 part out with in-line six Hey Ray. In line for the spare tire carrier shipped to 90713. Thanks.

07-17-2018, 05:45 PM	#24
rayray767 Registered User Join Date: Apr 2012 Location: Columbus Ohio Posts: 1,136	Re: K5 part out with in-line six Just wanted to touch bases with everyone still at work this evening and going to my second shortly.. I’ve got to work Saturday but just a few hours . I’ll be in contact after that ... thanks... Ray

07-18-2018, 02:25 PM	#25
toomany2yz Registered User Join Date: Dec 2014 Location: Auburn Posts: 57	Re: K5 part out with in-line six Title? Price on what's left after everything is picked over?

Register or Log In To remove these advertisements.