Another one underway! Meet project Savannah

[NoNeck]

We couldn't find any upper radiator brackets that we like for the FrostBite radiator. After some experimentation we made up some simple aluminum brackets from 1" x .025" bar stock. They look right at home with the aluminum radiator. We are going to change out the black mounting bolt for a chrome button top.

POP

[68bowtie]

Those look really slick, and fit very well!

[NoNeck]

Chad and I have started pulling things together for his truck now that Spring is just around the corner.

We had the bed tubs, front bed panel, rear bed panel, grille, and tailgate media blasted last week and delivered to the body shop for initial primer/sealer.

While we were at it they blasted the parking light housings and I detailed them and bagged them for reassembly.

The wood bed sills and front splash apron were blasted then powder coated GM Satin Black. They turned out nice.

The original Bowties shine pretty good after a little polishing.

Chad has chosen African Mahogany Sepele exotic wood for the bed floor. It has a nice grain and color and planes really smooth.

Truck is scheduled to go to body shop for prep and paint in a few weeks. Stay tuned!

POP

[nlped]

Phenomenal!!! Hope y’all keep plugging away at it.

[NoNeck]

Originally Posted by nlped

Phenomenal!!! Hope y’all keep plugging away at it.

Thanks Carter. Good to hear from you.

[cericd]

Looking great guys! Can't wait to see how this one turns out.

[omodified]

Originally Posted by NoNeck

Nothing like an awesome set of Doug's 1-7/8" Full Length Headers bolted to those Gibbons Motorsports Heads. That 6.0 will like all that extra air flow.

POP

I just read through your build and it is coming along very nicely. Are these headers polished stainless or coated? I really like the fit on those. Keep it up!