The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-29-2014, 12:27 AM   #26
2tontruck
Registered User
 
Join Date: Sep 2003
Location: Omaha,Ne
Posts: 108
Re: Will 1987-1991 blazer fuel tank work?

Does anybody have the part number of the sending unit? I plan on putting one of these in a Suburban that I am doing a LS swap on. I would guess that the sending unit is the standard 0-90ohm?
2tontruck is offline   Reply With Quote
Old 12-29-2014, 03:12 PM   #27
N.T.Q
Registered User
 
Join Date: Jun 2012
Location: kewaunee,wi
Posts: 86
Re: Will 1987-1991 blazer fuel tank work?

how can one find out which sending unit you need ? I know there is 2 inch difference from 25 to 31 gallon tank, do you measure from the pan or from bottom of the inside
N.T.Q is offline   Reply With Quote
Old 01-19-2015, 11:13 PM   #28
XJDG72X
Registered User
 
Join Date: Jan 2015
Location: Portland Oregon
Posts: 5
Re: Will 1987-1991 blazer fuel tank work?

Quote:
Originally Posted by jamesjones View Post
I'm using an '87 tank and sending unit in my '72. I put a Walbro 400 in it though.

I haven't had a chance to mount the tank yet but I looks like it should fit.
I am building a 72 K20 4x4 with lq4 4l80e and was wondering if this set up would work?

Thanks!
XJDG72X is offline   Reply With Quote
Old 02-07-2015, 10:20 AM   #29
chevy-fun
Registered User
 
chevy-fun's Avatar
 
Join Date: Jun 2011
Location: Arlington, Tx
Posts: 338
Re: Will 1987-1991 blazer fuel tank work?

good info
chevy-fun is offline   Reply With Quote
Old 10-13-2015, 10:28 AM   #30
mcmlxix
Collector of Projects
 
mcmlxix's Avatar
 
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
Re: Will 1987-1991 blazer fuel tank work?

Bringing this back up for information on the connections to the in tank pump. I don't want to run AN fittings. Looking for either a barbed fitting for EFI rubber hose or possible the newer style nylon fuel line.
__________________
Rich
1972 K5 Blazer CST Click HERE

D60 BIG BRAKE UPGRADE Click HERE
mcmlxix is offline   Reply With Quote
Old 10-15-2015, 09:32 PM   #31
jessemthompson
Registered User
 
Join Date: Nov 2011
Location: Williamsburg, VA
Posts: 955
Re: Will 1987-1991 blazer fuel tank work?

I installed this tank in my 72 with AN Fittings. I bought the sending unit from rock auto. They had sending units that used barbed fittings as well.
jessemthompson is offline   Reply With Quote
Old 10-15-2015, 09:37 PM   #32
jessemthompson
Registered User
 
Join Date: Nov 2011
Location: Williamsburg, VA
Posts: 955
Re: Will 1987-1991 blazer fuel tank work?

Quote:
Originally Posted by dkauffman05 View Post
I would like to see some picture of how much these tanks hang below the truck.
jessemthompson is offline   Reply With Quote
Old 10-16-2015, 12:02 AM   #33
GMC-YA68
Senior Member
 
GMC-YA68's Avatar
 
Join Date: Mar 2004
Location: Lee's Summit, MO (KC)
Posts: 742
Re: Will 1987-1991 blazer fuel tank work?

Dorman 800-078 feed
dorman 800-079 return

Those look like they would work.
__________________
-Keegan-

'72 Jimmy 4x4 - 5.3/4L65E/NP205 swap
http://67-72chevytrucks.com/vboard/s...d.php?t=663780
GMC-YA68 is offline   Reply With Quote
Old 04-10-2017, 10:15 PM   #34
findog78
Registered User
 
Join Date: Dec 2009
Location: Puyallup WA
Posts: 60
Re: Will 1987-1991 blazer fuel tank work?

Quote:
Originally Posted by 1SICMAX View Post
Thanks for the answer. I found a replacement fuel sending unit with threaded fittings.
What sending unit did you find to get the threaded fittings?
findog78 is offline   Reply With Quote
Old 06-23-2017, 02:19 PM   #35
stangtjk
Registered User
 
Join Date: Nov 2016
Location: Newport News
Posts: 249
Re: Will 1987-1991 blazer fuel tank work?

Quote:
Originally Posted by jamesjones View Post
Yes it can be turned. The slanted edge on the bottom will just be facing the front instead of the back. I plan on doing it that way. I should be installing mine later this week. I'll try and post some pics of the fitment.
For anyone else looking into this the 92-96 31 gallon tank appears to be identical except the filler neck is on the opposite side but doesn't have the 90 bend on it.
stangtjk is offline   Reply With Quote
Old 07-03-2017, 11:47 PM   #36
lowrodderchev
Registered User
 
lowrodderchev's Avatar
 
Join Date: Dec 2011
Location: visalia ca
Posts: 1,480
Re: Will 1987-1991 blazer fuel tank work?

for those who have used the 87 tank what fuel gauge did you use? i ran the 87 tank with the 87 sender and my 75 fuel gauge goes past fuel everything is brand new, any suggestions?
__________________
my 57 chevy truck build
http://67-72chevytrucks.com/vboard/s...d.php?t=601554
lowrodderchev is offline   Reply With Quote
Old 07-08-2017, 01:36 AM   #37
Blazerowner
Senior Member
 
Blazerowner's Avatar
 
Join Date: Apr 2006
Location: Yuba City, Ca
Posts: 1,919
Re: Will 1987-1991 blazer fuel tank work?

It's likely the ohm on the sender. Here's some good reading.

http://www.chevyclassicsclub.com/the...ry-1965-newer/
__________________
Kirk
72 Blazer CST 4wd highlander
66 Nova
Blazerowner is offline   Reply With Quote
Old 03-02-2018, 12:51 PM   #38
K5 MAX
Registered User
 
K5 MAX's Avatar
 
Join Date: Jan 2017
Location: Panama City, FL
Posts: 120
Re: Will 1987-1991 blazer fuel tank work?

Quote:
Originally Posted by stangtjk View Post
For anyone else looking into this the 92-96 31 gallon tank appears to be identical except the filler neck is on the opposite side but doesn't have the 90 bend on it.
Yeah I'm thinking about this tank as well. https://www.1aauto.com/fuel-tank/i/1...yABEgLLPPD_BwE
Filler neck hole is on the correct side for the first gen k5. I need a tank in mine and would like to go ahead and get a bigger one that would work for a further LS swap but could also work for now with my stock 72 motor and fuel pump. Anyone know if I can buy the stock 96 fuel pump/sending unit then pull the fuel pump out and replace it with a piece of fuel line. Rely on the 72 fuel pump then, to suck from the new tank just like it does with the older set up. That way I could go back to the in the tank pump when I do a LS swap later?
__________________
1972 K5 Blazer
350/350/PS/PB
From GA but live in Panama City, FL
K5 MAX is offline   Reply With Quote
Old 03-04-2018, 01:41 PM   #39
findog78
Registered User
 
Join Date: Dec 2009
Location: Puyallup WA
Posts: 60
Re: Will 1987-1991 blazer fuel tank work?

What size is the filler neck on this tank?
findog78 is offline   Reply With Quote
Old 03-04-2018, 03:00 PM   #40
K5 MAX
Registered User
 
K5 MAX's Avatar
 
Join Date: Jan 2017
Location: Panama City, FL
Posts: 120
Re: Will 1987-1991 blazer fuel tank work?

Quote:
Originally Posted by findog78 View Post
What size is the filler neck on this tank?
Not sure, the plan would be to have a filler neck welded on to fit the first gen if needed if the stock tahoe one wouldn’t work. Maybe pull a filler tube from one from a junkyard to save some $. I’ll buy a new tank though
__________________
1972 K5 Blazer
350/350/PS/PB
From GA but live in Panama City, FL
K5 MAX is offline   Reply With Quote
Old 03-08-2018, 11:50 PM   #41
K5 MAX
Registered User
 
K5 MAX's Avatar
 
Join Date: Jan 2017
Location: Panama City, FL
Posts: 120
Re: Will 1987-1991 blazer fuel tank work?

After doing some measuring the 92-96 tank won’t fit. It’s too wide to fit between the frame rails. I measure the width between mine at 27 1/4”, the stock tank and the 87-91 tanks are a little wider than this but only with the flanges. Guess it’s back to the 87-91 for me and having the filler next swapped to the other side on the tank or turning it around.
__________________
1972 K5 Blazer
350/350/PS/PB
From GA but live in Panama City, FL
K5 MAX is offline   Reply With Quote
Old 03-09-2018, 12:43 AM   #42
krue
Designated A-hole!
 
krue's Avatar
 
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,450
Re: Will 1987-1991 blazer fuel tank work?

Quote:
Originally Posted by findog78 View Post
What size is the filler neck on this tank?
Does this help?
Attached Images
 
__________________
"If it ain't broke, fix it 'til it is!"
Being stupid ain't illegal.

We're Still Debt Free Except for the House!!!
www.daveramsey.com

70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e
93 S-10 "Poppaw's Truck"
krue is offline   Reply With Quote
Old 03-09-2018, 08:33 AM   #43
Palf70Step
State of Confusion!

 
Palf70Step's Avatar
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,575
Re: Will 1987-1991 blazer fuel tank work?

1 3/4" looks to me. You measure the diameter below the ridge though, least I do with a caliper
__________________
Bill
1970 Chevy Custom/10 LWB Fleetside
2010 Toyota Tacoma PreRunner SR5 Double Cab - DD

Member of Louisiana Classic Truck Club (LCTC)

Bill's Gallery
Life isn't tied with a bow, but it's still a gift.
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!
Palf70Step is offline   Reply With Quote
Old 11-16-2018, 09:38 PM   #44
Coursey
Registered User
 
Coursey's Avatar
 
Join Date: Aug 2013
Location: Kentucky
Posts: 549
Re: Will 1987-1991 blazer fuel tank work?

ttt
Coursey is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:24 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com