The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-13-2018, 06:29 PM   #1
krue
Designated A-hole!
 
krue's Avatar
 
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,450
Wiring harness question

Noticing some issues with the harness on the 03 Savana 6.0l harness. I have an 01 Silverado 4.8l parts truck. Can I use that harness for my swap? Both are drive by cable. The truck was 4wd with the4l60e and the van is 2wd 4l80e.
__________________
"If it ain't broke, fix it 'til it is!"
Being stupid ain't illegal.

We're Still Debt Free Except for the House!!!
www.daveramsey.com

70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e
93 S-10 "Poppaw's Truck"
krue is offline   Reply With Quote
Old 03-13-2018, 09:27 PM   #2
t300
Registered User
 
Join Date: Mar 2013
Location: Manitoba
Posts: 184
Re: Wiring harness question

i used a 2001 silverado 4x4 4.8 harness on my 2002 6.0 lq4 motor. DBC and 4l60e. was my first LS rewire but went fine.
t300 is offline   Reply With Quote
Old 03-13-2018, 10:09 PM   #3
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,118
Re: Wiring harness question

Quote:
Originally Posted by krue View Post
Noticing some issues with the harness on the 03 Savana 6.0l harness. I have an 01 Silverado 4.8l parts truck. Can I use that harness for my swap? Both are drive by cable. The truck was 4wd with the4l60e and the van is 2wd 4l80e.
They're basically the same harness, but vans use a different MAF, so you may need to change the plug. Also, you will need to re-pin the transmission connector to a 4l80e if that's what trans you're using, but it's pretty straight forward. http://lt1swap.com/4l60e_4l80e_harness.htm
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote
Old 03-13-2018, 10:27 PM   #4
krue
Designated A-hole!
 
krue's Avatar
 
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,450
Re: Wiring harness question

Quote:
Originally Posted by ls1nova71 View Post
They're basically the same harness, but vans use a different MAF, so you may need to change the plug. Also, you will need to re-pin the transmission connector to a 4l80e if that's what trans you're using, but it's pretty straight forward. http://lt1swap.com/4l60e_4l80e_harness.htm
I was planning on swapping the truck intake on the van, it's not as fugly. I assume that is doable.
__________________
"If it ain't broke, fix it 'til it is!"
Being stupid ain't illegal.

We're Still Debt Free Except for the House!!!
www.daveramsey.com

70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e
93 S-10 "Poppaw's Truck"
krue is offline   Reply With Quote
Old 03-13-2018, 10:45 PM   #5
Dustytrix
Registered User
 
Join Date: Jan 2012
Location: Petal,Ms.
Posts: 428
Re: Wiring harness question

Yes you can swap intakes,
Dustytrix is offline   Reply With Quote
Old 03-14-2018, 11:59 PM   #6
Flubyu
Registered User
 
Join Date: Mar 2017
Location: Clever, Mo
Posts: 69
Re: Wiring harness question

I’ve heard the van harness gives you more wire length...may help with pcm mounting.
__________________
'71 C-10 SWB Shop Truck
Currently 350/350, soon to be LS'd.
Flubyu is offline   Reply With Quote
Old 03-15-2018, 03:35 AM   #7
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Wiring harness question

The main "leg" of the van harness has a good deal of extra length (like 14-18" IIRC). My donor was from a truck, and I had my harness done on the van-donor style. Made moving ECM mounting locations easier imo.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 03-15-2018, 07:59 AM   #8
krue
Designated A-hole!
 
krue's Avatar
 
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,450
Re: Wiring harness question

My van harness has sensor wires cut out, multiple butt splices crimped on, to include mystery wires added.
__________________
"If it ain't broke, fix it 'til it is!"
Being stupid ain't illegal.

We're Still Debt Free Except for the House!!!
www.daveramsey.com

70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e
93 S-10 "Poppaw's Truck"
krue is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:09 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com