BB ex. manifolds F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68gmcjon · 07-30-2003, 11:49 AM

anyone out there need some exhaust manifolds for a bb?
50 bucks and theyre yours

68gmcjon · 07-30-2003, 06:36 PM

Since a couple of people have asked for pics here are a few
Two studs have been broken off the manifolds(one on each) and they are out of a late 70's i think so they have smog stuff, which in the second and third pics is melted on one manifold, but it is not needed. i took these off of my truck and put headers on, they worked fine.

68gmcjon · 07-30-2003, 06:38 PM

Here is the melted bolts

68gmcjon · 07-30-2003, 06:56 PM

the left hand side is off a 73-75 vehicle and according to the part # was used for police???????
the right hand side is off a 67 and has nothing special about it.

07-30-2003, 11:49 AM	#1
68gmcjon Got earplugs? Join Date: Mar 2002 Location: Winfield, Kansas Posts: 556	BB ex. manifolds F/S anyone out there need some exhaust manifolds for a bb? 50 bucks and theyre yours __________________ 1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA

07-30-2003, 06:36 PM	#2
68gmcjon Got earplugs? Join Date: Mar 2002 Location: Winfield, Kansas Posts: 556	Since a couple of people have asked for pics here are a few Two studs have been broken off the manifolds(one on each) and they are out of a late 70's i think so they have smog stuff, which in the second and third pics is melted on one manifold, but it is not needed. i took these off of my truck and put headers on, they worked fine. __________________ 1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA

07-30-2003, 06:38 PM	#3
68gmcjon Got earplugs? Join Date: Mar 2002 Location: Winfield, Kansas Posts: 556	Here is the melted bolts Attached Images __________________ 1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA

07-30-2003, 06:56 PM	#4
68gmcjon Got earplugs? Join Date: Mar 2002 Location: Winfield, Kansas Posts: 556	the left hand side is off a 73-75 vehicle and according to the part # was used for police??????? the right hand side is off a 67 and has nothing special about it. __________________ 1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.