Camaro Caliper Brackets - Page 14 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Cj Davidson · 12-05-2016, 06:22 PM

I need a set for 68 GMC. How much? what rotor will I need to purchase?

**Captainfab** · 12-06-2016, 01:14 AM

That information is in post #1 of this for sale thread.

I assume your GMC has a truck 12 bolt and not the Dana 44?

Quote:

Originally Posted by Cj Davidson

I need a set for 68 GMC. How much? what rotor will I need to purchase?

Bobzilla75 · 04-07-2017, 03:37 PM

PM incoming.

**Captainfab** · 04-07-2017, 11:48 PM

I replied to your PM

Quote:

Originally Posted by Bobzilla75

PM incoming.

Hidesertchevy · 04-09-2017, 01:29 AM

How much does this swap cost average with all parts?

**Captainfab** · 04-09-2017, 11:06 PM

I have no idea what the current cost is on this conversion. That is going to depend on what you will pay for the caliper and bracket cores or if you just pay the core charge when you purchase rebuilt calipers with the bracket.

Here is the cost comparison I did nearly 7 years ago, in post #32.

http://www.67-72chevytrucks.com/vboa...=398352&page=2

Quote:

Originally Posted by Hidesertchevy

How much does this swap cost average with all parts?

Bobzilla75 · 04-17-2017, 11:36 AM

Another satisfied customer!

As for total cost,I have the brackets ($133), the rotors $17 ea from Advance with coupon code, rear pads at $13 with coupon codes, Calipers are $56 each and hte used parts cost me $40 for cores, cables, hoses and lines. Under $350 in total cost so far.

**Captainfab** · 04-18-2017, 12:06 AM

Thanks for posting the pic and cost info.

badazmalibu · 05-03-2017, 09:40 PM

I have used Moser axles to convert my 71 truck 12 bolt to a 5x4.75(GM car) lug pattern. If I purchase the Camaro caliper brackets what would I use for rotors since the Bolt pattern has been changed? Will the Camaro rotors and calipers work? Thanks!

**Captainfab** · 05-03-2017, 11:35 PM

The '93-'97 Camaro (F body) have a 5 x 4.650" wheel stud pattern, plus these brackets are designed to use the '94-'96 Impala SS/Caprice 9C1 rear rotors. You can not just change rotors and still have the caliper line up with the rotor. To use these brackets on a differential with the 5 x 4.75 wheel stud pattern, you will have to drill the 4.75" pattern in between the 5 x 5 pattern on the Impala SS rotors. I do have a set of brackets that are designed for the 5 x 4.75 wheel stud pattern on a truck/Impala 12 bolt, but I just haven't put them on the market yet. They use a different caliper.

Quote:

Originally Posted by badazmalibu

I have used Moser axles to convert my 71 truck 12 bolt to a 5x4.75(GM car) lug pattern. If I purchase the Camaro caliper brackets what would I use for rotors since the Bolt pattern has been changed? Will the Camaro rotors and calipers work? Thanks!

DarkKnightWong · 05-20-2017, 04:46 PM

Hi Captian

I have a 69 that I'm converting to 5 Lug. I plan to just redrill my current axles and turn down the center of them. I was going to just get some 5 lug drums. However I scored a set of calipers and brackets

Will these brackets still work on my 69 Axles ?

Thanks
Allen

**Captainfab** · 05-20-2017, 11:12 PM

As long as your '69 has a truck 12 bolt, it will be really no different than any other '64-'82 truck 12 bolt. I don't remember if the Impala SS rotors require to turn down the OD of the axle flange or not.

crob35 · 06-06-2017, 07:45 PM

I need payment information, so I can order a set of brackets. Thanks

**Captainfab** · 06-06-2017, 11:40 PM

I will send you a PM with that info.

Quote:

Originally Posted by crob35

I need payment information, so I can order a set of brackets. Thanks

Shinysideup · 06-19-2017, 12:12 PM

Id like a set please, Pm address for money order.

**Captainfab** · 06-20-2017, 12:06 AM

I replied to both of your PM's

Quote:

Originally Posted by Shinysideup

Id like a set please, Pm address for money order.

greybeard2009 · 08-21-2017, 09:29 PM

Took a little while to get them but your brackets looked great and all hardware was perfect. Thanks Captainfab!

**Captainfab** · 08-21-2017, 11:58 PM

Thanks for the compliments

71Charlie10 · 10-25-2017, 04:28 PM

I am interested in a set of the 93-97 camaro caliper brackets.

thanks

nic

mpalmer03 · 02-19-2018, 09:33 PM

They look great. Can you give a couple specifics (yr/model) from which vehicles most people are sourcing the rotors & calipers to use in conjunction with your brackets? I just bought a '69 w/ 6 lug I want to convert. Thanks

**Captainfab** · 02-20-2018, 12:23 AM

That info is in post#11. All of my rear disc brackets come with a parts list including parts numbers. I assume you are changing your truck to the 5 x 5" wheel stud pattern?

Quote:

Originally Posted by mpalmer03

They look great. Can you give a couple specifics (yr/model) from which vehicles most people are sourcing the rotors & calipers to use in conjunction with your brackets? I just bought a '69 w/ 6 lug I want to convert. Thanks

mpalmer03 · 02-20-2018, 09:08 AM

Thanks for your reply. Where is Post #11 with that info? I'm new to messaging on the site and don't find it real intuitive. And yes, converting to 5 lug

mpalmer03 · 02-20-2018, 11:13 PM

So, to clarify as I may be a little slow...I need to find either 94-96 impala rotors & calipers or 93-97 Camaro rotors & calipers or are the calipers and rotors mixed? Thanks

**Captainfab** · 02-21-2018, 12:17 AM

Post #11 of this for sale thread

Quote:

Originally Posted by mpalmer03

Thanks for your reply. Where is Post #11 with that info? I'm new to messaging on the site and don't find it real intuitive. And yes, converting to 5 lug

Yes

Quote:

Originally Posted by mpalmer03

Is this post #11? These brackets utilize the '94-'96 Impala/Caprice rotors and the '93-'97 F-body calipers which have a built in e-brake.

Exactly as stated in your quote from post #11 above.........the Impala rotors and the Camaro calipers. If you want to use the Impala SS rotors and calipers, I have different brackets for that combination.

Quote:

Originally Posted by mpalmer03

So, to clarify as I may be a little slow...I need to find either 94-96 impala rotors & calipers or 93-97 Camaro rotors & calipers or are the calipers and rotors mixed? Thanks

mpalmer03 · 02-20-2018, 09:26 AM

Is this post #11? These brackets utilize the '94-'96 Impala/Caprice rotors and the '93-'97 F-body calipers which have a built in e-brake.

04-09-2017, 01:29 AM	#5
Hidesertchevy Registered User Join Date: Mar 2017 Location: yucca valley Posts: 239	Re: Camaro Caliper Brackets How much does this swap cost average with all parts?

04-17-2017, 11:36 AM	#7
Bobzilla75 Registered User Join Date: Mar 2017 Location: Lebanon Posts: 30	Re: Camaro Caliper Brackets Another satisfied customer! As for total cost,I have the brackets ($133), the rotors $17 ea from Advance with coupon code, rear pads at $13 with coupon codes, Calipers are $56 each and hte used parts cost me $40 for cores, cables, hoses and lines. Under $350 in total cost so far.

04-18-2017, 12:06 AM	#8
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Camaro Caliper Brackets Thanks for posting the pic and cost info. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

05-03-2017, 09:40 PM	#9
badazmalibu Registered User Join Date: May 2013 Location: Palm City, Fl Posts: 86	Re: Camaro Caliper Brackets I have used Moser axles to convert my 71 truck 12 bolt to a 5x4.75(GM car) lug pattern. If I purchase the Camaro caliper brackets what would I use for rotors since the Bolt pattern has been changed? Will the Camaro rotors and calipers work? Thanks!

05-20-2017, 11:12 PM	#12
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Camaro Caliper Brackets As long as your '69 has a truck 12 bolt, it will be really no different than any other '64-'82 truck 12 bolt. I don't remember if the Impala SS rotors require to turn down the OD of the axle flange or not. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

12-05-2016, 06:22 PM	#1
Cj Davidson Registered User Join Date: Dec 2016 Location: Sheridan arkansas Posts: 3	Re: Camaro Caliper Brackets I need a set for 68 GMC. How much? what rotor will I need to purchase?

04-07-2017, 03:37 PM	#3
Bobzilla75 Registered User Join Date: Mar 2017 Location: Lebanon Posts: 30	Re: Camaro Caliper Brackets PM incoming.

05-20-2017, 04:46 PM	#11
DarkKnightWong Registered User Join Date: Oct 2012 Location: Dunwoody GA Posts: 34	Re: Camaro Caliper Brackets Hi Captian I have a 69 that I'm converting to 5 Lug. I plan to just redrill my current axles and turn down the center of them. I was going to just get some 5 lug drums. However I scored a set of calipers and brackets Will these brackets still work on my 69 Axles ? Thanks Allen

06-06-2017, 07:45 PM	#13
crob35 Registered User Join Date: Jan 2009 Location: albany,ga Posts: 82	Re: Camaro Caliper Brackets I need payment information, so I can order a set of brackets. Thanks

08-21-2017, 09:29 PM	#17
greybeard2009 Registered User Join Date: Jan 2015 Location: Morganton, NC Posts: 9	Re: Camaro Caliper Brackets Took a little while to get them but your brackets looked great and all hardware was perfect. Thanks Captainfab! __________________ As of 12/24/2014 building a 69 LWB low buget daily driver with/for my son. He is 16 and learning/buying/building as we go. 69LWB, factory air, PS, PB, custom deluxe, two tone Saddle and White, 350/350TH, 12 bolt 373

08-21-2017, 11:58 PM	#18
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Camaro Caliper Brackets Thanks for the compliments __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

10-25-2017, 04:28 PM	#19
71Charlie10 Registered User Join Date: Oct 2016 Location: FWB Fl Posts: 14	Re: Camaro Caliper Brackets I am interested in a set of the 93-97 camaro caliper brackets. thanks nic

02-19-2018, 09:33 PM	#20
mpalmer03 Registered User Join Date: Oct 2017 Location: Baltimore, MD Posts: 16	Re: Camaro Caliper Brackets They look great. Can you give a couple specifics (yr/model) from which vehicles most people are sourcing the rotors & calipers to use in conjunction with your brackets? I just bought a '69 w/ 6 lug I want to convert. Thanks

02-20-2018, 09:08 AM	#22
mpalmer03 Registered User Join Date: Oct 2017 Location: Baltimore, MD Posts: 16	Re: Camaro Caliper Brackets Thanks for your reply. Where is Post #11 with that info? I'm new to messaging on the site and don't find it real intuitive. And yes, converting to 5 lug

02-20-2018, 11:13 PM	#23
mpalmer03 Registered User Join Date: Oct 2017 Location: Baltimore, MD Posts: 16	Re: Camaro Caliper Brackets So, to clarify as I may be a little slow...I need to find either 94-96 impala rotors & calipers or 93-97 Camaro rotors & calipers or are the calipers and rotors mixed? Thanks



Register or Log In To remove these advertisements.

02-20-2018, 09:26 AM	#25
mpalmer03 Registered User Join Date: Oct 2017 Location: Baltimore, MD Posts: 16	Re: Camaro Caliper Brackets Is this post #11? These brackets utilize the '94-'96 Impala/Caprice rotors and the '93-'97 F-body calipers which have a built in e-brake.

Register or Log In To remove these advertisements.