settle a bet!

[Longhorn Man]

Originally Posted by streetstar

Why, when the materials are available to do it the rght way ----- granted , no pro will be caught dead using a $40 HVLP gun, but that will be fine with practice for a beginner paint job --- and compressors can be had for $100 at Harbor Freight and similar tool outlets. -- again , not a pro quality compressor(you dont need an 80 gallon 2 stage 3 cylinder compressor for paint anymore unless you are using a siphon feed gun) , but all you need is consistent air flow and a good moisture filter in the line

You gotta remember, one man's budget bolt on (or budget paint job in this case) is another man's ENTIRE budget.

[streetstar]

Originally Posted by Longhorn Man

You gotta remember, one man's budget bolt on (or budget paint job in this case) is another man's ENTIRE budget.

Oh, i know - everyone's on a budget to one degree or another, i was just trying to point what a low buck paint operation might cost. I have seen some people make a makeshift booth in their garage as well using 2x4's and plastic sheeting too. But usually for painting by the panel, not an entire truck because of ventilation issues