KS Parting a 1972 cheyenne super truck and 72 cheyenne super cab - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

johnyoung · 10-27-2014, 09:19 PM

Would you have the rear wiring harness that goes to the gas tank and back to the taillights. Need one badly to finish my truck. thanks John

teeitup · 10-27-2014, 09:28 PM

John, the in cab gas tank takes a brown wire, it goes under carpet/mat. I know I have one of those. I have a harness that goes from outside front of cab to the plug for rear taillight harness, I need to make sure its in good condition. I can check on it tomorrow night

Thanks Randy

bonnieclyde100 · 10-27-2014, 09:30 PM

Quote:

Originally Posted by teeitup

I knew they had 2 different gear box shafts but in all the trucks I've parted I've never ran into the smaller gearbox shaft, I never realized that the intermediate shaft was different

yes im afraid they are .thanks for answering but i have already ordered on from another member hope i didnt inconvenience you any .

cfienen67 · 10-27-2014, 09:37 PM

do you have any small block engine mount perches? and are the straight six ones different

teeitup · 10-27-2014, 09:44 PM

Bonnieclyde100, guess I never have run into that before, you'd think out of 600 trucks I would have. I learn something new about these trucks every once and awhile. No worries though, one day I might run into one so now I will know

cfienen67, sorry none right now and yes v8 and 6 cyl stands are different. But I will have a set of V8 ones coming in on a truck Wed evening

Thanks Randy

cfienen67 · 10-27-2014, 09:49 PM

how much for v8 ones

teeitup · 10-27-2014, 09:53 PM

$30 shipped

johnyoung · 10-27-2014, 10:03 PM

Appreciate the help on the rear wiring harness. Just PM me tomorrow night if you have time to check. No big deal if it takes a few days to check it out. Thanks John

teeitup · 10-30-2014, 05:40 PM

John, here ya go

68Bowtie4x4 · 10-31-2014, 02:07 PM

Any good dash pads?

teeitup · 10-31-2014, 02:26 PM

no sorry

Senorx · 11-02-2014, 10:31 AM

Is that a Quadrajet carb on the engine? Looking for the carb stud and wing nut where the air cleaner mounts. Looking for OEM like this or close to it.

teeitup · 11-02-2014, 06:33 PM

I can look I'm not sure if I do or not

Senorx · 11-02-2014, 06:37 PM

Would appreciate it. My air cleaner comes back from powder coating this week and I lost my stud / wing nut.

Brave71 · 11-05-2014, 02:52 PM

Randy, do you have a power steering pulley ? Shipped to 89015

10-27-2014, 09:19 PM	#151
johnyoung Registered User Join Date: May 2010 Location: London, Kentucky Posts: 88	Re: Parting a 1972 cheyenne super truck and 72 cheyenne super cab Would you have the rear wiring harness that goes to the gas tank and back to the taillights. Need one badly to finish my truck. thanks John

10-27-2014, 09:28 PM	#152
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 1972 cheyenne super truck and 72 cheyenne super cab John, the in cab gas tank takes a brown wire, it goes under carpet/mat. I know I have one of those. I have a harness that goes from outside front of cab to the plug for rear taillight harness, I need to make sure its in good condition. I can check on it tomorrow night Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-27-2014, 09:37 PM	#154
cfienen67 Registered User Join Date: Feb 2009 Location: Independence, KS Posts: 8	Re: Parting a 1972 cheyenne super truck and 72 cheyenne super cab do you have any small block engine mount perches? and are the straight six ones different

10-27-2014, 09:44 PM	#155
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 1972 cheyenne super truck and 72 cheyenne super cab Bonnieclyde100, guess I never have run into that before, you'd think out of 600 trucks I would have. I learn something new about these trucks every once and awhile. No worries though, one day I might run into one so now I will know cfienen67, sorry none right now and yes v8 and 6 cyl stands are different. But I will have a set of V8 ones coming in on a truck Wed evening Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-27-2014, 09:49 PM	#156
cfienen67 Registered User Join Date: Feb 2009 Location: Independence, KS Posts: 8	Re: Parting a 1972 cheyenne super truck and 72 cheyenne super cab how much for v8 ones

10-27-2014, 09:53 PM	#157
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 1972 cheyenne super truck and 72 cheyenne super cab $30 shipped __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-27-2014, 10:03 PM	#158
johnyoung Registered User Join Date: May 2010 Location: London, Kentucky Posts: 88	Re: Parting a 1972 cheyenne super truck and 72 cheyenne super cab Appreciate the help on the rear wiring harness. Just PM me tomorrow night if you have time to check. No big deal if it takes a few days to check it out. Thanks John

10-30-2014, 05:40 PM	#159
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 1972 cheyenne super truck and 72 cheyenne super cab John, here ya go Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-31-2014, 02:07 PM	#160
68Bowtie4x4 Registered User Join Date: Oct 2003 Location: Athena, Oregon Posts: 167	Re: Parting a 1972 cheyenne super truck and 72 cheyenne super cab Any good dash pads? __________________ 72 Chevy Cheyenne K10 4x4 LWB, 4" lift kit, 350/350/NP205, rebuild in progress.

10-31-2014, 02:26 PM	#161
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 1972 cheyenne super truck and 72 cheyenne super cab no sorry __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-02-2014, 10:31 AM	#162
Senorx Registered User Join Date: Jan 2014 Location: South Texas Posts: 567	Re: Parting a 1972 cheyenne super truck and 72 cheyenne super cab Is that a Quadrajet carb on the engine? Looking for the carb stud and wing nut where the air cleaner mounts. Looking for OEM like this or close to it. Attached Images

11-02-2014, 06:33 PM	#163
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 1972 cheyenne super truck and 72 cheyenne super cab I can look I'm not sure if I do or not __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-02-2014, 06:37 PM	#164
Senorx Registered User Join Date: Jan 2014 Location: South Texas Posts: 567	Re: Parting a 1972 cheyenne super truck and 72 cheyenne super cab Would appreciate it. My air cleaner comes back from powder coating this week and I lost my stud / wing nut.

11-05-2014, 02:52 PM	#165
Brave71 Registered User Join Date: Sep 2013 Location: Henderson, NV Posts: 304	Re: Parting a 1972 cheyenne super truck and 72 cheyenne super cab Randy, do you have a power steering pulley ? Shipped to 89015



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.