Parting out 1967 GMC LWB Fleet 1/2 Ton - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Sinisterspeed · 07-04-2009, 02:37 PM

OK i posted some pictures of this truck in the main area laughing about bringing it home the other day after leaving the house for some bolts for my project. There is a ton of Nice parts on this truck. No way can I post prices for each and every part of this truck but I can start with whats already spoken for and some of the big stuff. RH bed side is no good. To much damage to repair it reasonably.

ALL SHIPPING WILL BE ACTUAL SHIPPING PLUS A COUPLE BUX CAUSE THEY ARE ALWAYS OFF WHEN I TAKE ITEMS IN. I WILL SHIP
USPS
UPS
FED EX
WHATEVER OTHER WAY NEEDS TO BE DONE WITHIN REASON.

ALL ITEMS WILL BE SHIPPED FROM 97124 AREA CODE.

Horse trading is always welcome as well. THINGS I STILL NEED (changing daily :WINK)

5. Black or Grey seat belts

7. Black or Grey Visor Clips

If there is something you see you need just say so, I will get pictures of it and search for some pricing accordingly.

I'll Start off with a few things I do know of:

STILL FOR SALE

67 Grill (Painted Grill Dent in center top not caved in)---- 40.oo (top bar is removed)
Front Fender Drivers Side---- 25.00 ea
Front Fender Pass Side (Has Spit at the bottom Corner as seen in pics)---- 25.00

Drivers Side Bedside---- 100.oo
Hood Hinges 30.00
Column (Non Tilt 4sp) ---- 50.00
Radio Delete Cowl ---- 35.00
4sp SM420 Trans 50.00 (NO SHIPPING)
Glove box door --- 15.00
Seat Belts --- 35.00
Rear End (leaf spring 6 lug) ----75.00 (no shipping)
Leaf Springs ---- 75.00 (will ship but they are expensive)
clutch pedal and linkage (everything from pedal to trans) 50.00
Complete front end ( Ill cut the frame in front of cab w/new brakes) 50.00 NO SHIPPING on this either.
Core Support 35.00
Batt tray 25.00
Drive Shaft 40.00

Anything else that you dont see in the "Still for Sale" or "Sold Items" list let me know and I'll see if its there.

SOLD ITEMS
Engine Compartment Harness 35.00 SHIPPED sold
Carberator w/linkage ---- 30.00 Shipped sold
Very Nice 99% rust free 67 Small window cab w/Title---- 500.oo SOLD stored till april when fine69 picks it up
Doors Pair ---- 100.oo (Not perfect if you need detailed pics let me know) Sold to fine69 w/cab
Engine Bay Harness 35.00 (GMC w/4sp Not sure if there is any diff but this is what its from) sold
Very Nice Tilt fwd seat no rips---- 125.oo SOLD TO BRAD Storing till he returns from IRAQ
Floor covering ---- 25.00 Sold glimmertwin ****Shipped****
67 only AshTray---- 10.00 Sold glimmertwin ****Shipped****
door sill plates ---- 10.00 Sold glimmertwin ****Shipped****
Gas Pedal ---- 5.00 Sold glimmertwin ****Shipped****
exhaust pipe ---- Sold pament glimmertwin ****Shipped****
Rear Bumper ----25.00 glimmertwin ****Shipped****
Ignition/Door Lock Set ---- 30.00 Sold glimmertwin
Bed Wood ---- SOLD Keeping
Inside Door Panels ---- SOLD Keeping
Inside door handles/window cranks----- SOLD thanks Raguemoe ****Shipped ****
Wheel Wells 85.oo Pr. ----SOLD thanks Raguemoe ****Shipped ****
Dash Pad 25.00 ---- Sold Raguemoe ****Shipped ****
Hood 25.oo ---- Sold-Frizzle Fry ****Picked up.****
Inner Fenders 25.oo ea ---- Sold-Frizzle Fry ****Picked up.****
Rear View Mirror 10.00 ---- Sold CPNE ****Shipped****
Guage Cluster 50.00 ---- Sold CPNE ****Shipped****
Choke Knob/Cable 5.00 ---- Sold CPNE ****Shipped****
Heater Controls ---- Sold CPNE ****Shipped****
Steering Wheel ---- Sold to Mullet '72 ****Shipped ****
Steering Gear 40.00 ---- Sold to Elephanthead ****Shipped ****
292 I6 200.00 ---- Sold locally ****Picked up.****
Headlight/Wiper Switches 10.oo SHIPPED **** SOLD nicks05z71 ****[/B] ****Shipped ****
Under Dash Wiring 50.oo Shipped **** Sold to Buckeye1 **** ****Shipped ****[/COLOR]

Everything Else Goes as well Just let me know what you need and I'll get pictures of it (if I have it)

Raguemoe · 07-04-2009, 02:53 PM

How are the rear wheel well housings (dents,rust,damage). Can you ship the seat and are the window wings/vents chrome (condition). Can we get a pic of the engine compartment! Thanks

Sinisterspeed · 07-04-2009, 03:31 PM

Sinisterspeed · 07-04-2009, 03:32 PM

Sinisterspeed · 07-04-2009, 03:34 PM

Sinisterspeed · 07-04-2009, 03:35 PM

Sinisterspeed · 07-04-2009, 03:44 PM

Quote:

Originally Posted by Raguemoe

How are the rear wheel well housings (dents,rust,damage). Can you ship the seat and are the window wings/vents chrome (condition). Can we get a pic of the engine compartment! Thanks

The Wings are not up to par with your projects. (they dont match 1 black 1 chrome)

Seat I'm sure could be shipped. Not sure how yet though.
Wheel well housings are perfect and 81.oo ea on Brothers with 10% off. lets just make it half that.

Raguemoe · 07-04-2009, 03:57 PM

Put me in line for the housings, give me a day or so to think about it. Thanks!

Raguemoe · 07-04-2009, 05:08 PM

Put me in line for the dash pad also! Thanks

cobra1966 · 07-04-2009, 05:46 PM

How about the Front winshield? If its clear of cracks, how much? Do you have the front sway bar? Auto prefered Thanks

Lewis

**CPNE** · 07-04-2009, 08:52 PM

Interested in

1. Guage cluster
2. Choke knob/cable, etc
3. Rear bumper brackets
4. GMC grille top bar (possibly whole grille/headlight bezels, inluding top bar if included in $40 price)
5. Headlight wiring harness

shipping to 03580

Thanks

**CPNE** · 07-04-2009, 09:01 PM

Also

Heater control
rear view mirror

Sinisterspeed · 07-04-2009, 09:22 PM

Quote:

Originally Posted by cobra1966

How about the Front winshield? If its clear of cracks, how much? Do you have the front sway bar? Auto prefered Thanks

Lewis

Windshield is great I'd say 40.00 however wouldn't it be cheaper to just order one from your local vendor? due to the shipping costs?
Usually under 2oo bucks installed with new glass. Might want to check that out first. If not I'll work with ya for sure on a fair price for sure. Not sure about how to ship glass though. Anyone ever shipped a w/s on here before?

Truck does not have a sway bar.

Quote:

Originally Posted by CPNE

Interested in

1. Guage cluster
2. Choke knob/cable, etc
3. Rear bumper brackets
4. GMC grille top bar (possibly whole grille/headlight bezels, inluding top bar if included in $40 price)
5. Headlight wiring harness

Guage Cluster 50.00 (Bezel and guages included)
Choke Knob cable 5.oo
rear bumper brackets 20.00
Grill was stated as 40.oo for the whole thing due to the dent in the main section.
Headlight wiring harness (not sure if this is seperate from the Engine harness?)

Im at family's house for 4th of july. I will have a better idea tomorrow when I will be home again to look at the truck/parts

shipping to 03580

Again, shipping I will have to figure out once I get them removed tomorrow.

Thanks

Quote:

Originally Posted by CPNE

Also

Heater control
rear view mirror

Heater control 25.00? (i'll include the cables too if you need them)
Rear View Mirrow I belive is spoken for already. I will have to let ya know on that.

Frizzle Fry · 07-04-2009, 09:47 PM

Interested in the hood and front inner fenders pending condition and price. I can pick up.

Frizzle Fry · 07-04-2009, 09:48 PM

Also, I've shipped two bench seats via greyhound. It's usually around $80-$120.

**CPNE** · 07-04-2009, 09:54 PM

I'll pass on the guages, interested in everything else

**CPNE** · 07-04-2009, 09:55 PM

Headlight harness does separate at the fuse block in firewall

Sinisterspeed · 07-04-2009, 11:37 PM

Quote:

Originally Posted by Frizzle Fry

Interested in the hood and front inner fenders pending condition and price. I can pick up.

come take a look Frizzle. I can give you directions.

Hwy 6 going towards Tillamook, Just past Log cabin next driveway on the left.

If your still in North Plains Should be about 15-20 min from you. *6 miles past banks* Ill be home working on stuff all day Sunday if you want to come out.

jcsarmy · 07-05-2009, 01:35 AM

Dashpad? ship to 63965

jcsarmy · 07-05-2009, 01:35 AM

Also what color is it can we get a better pic

Sinisterspeed · 07-05-2009, 10:05 AM

Quote:

Originally Posted by jcsarmy

Dashpad? ship to 63965

jcsarmy sorry the dashpad is "pending" already with Raguemoe If something changes I will let you know.

Raguemoe · 07-05-2009, 05:30 PM

Ok, I'll take the interior handle set, dash pad and wheel wells. PM me with total w/shipping and I'll send payment.

I will pass on the rear view mirror and ash tray (I have a set already).

Thanks!

Sinisterspeed · 07-05-2009, 07:22 PM

Quote:

Originally Posted by Raguemoe

Ok, I'll take the interior handle set, dash pad and wheel wells. PM me with total w/shipping and I'll send payment.

I will pass on the rear view mirror and ash tray (I have a set already).

Thanks!

Sounds good. In the process of removing the wheel wells right now. As soon as I get them boxed up I can get you a quote.

Sinisterspeed · 07-05-2009, 07:22 PM

Hood is Sold
L & R inner fenders are Sold

Thanks Frizzle Fry!

Frizzle Fry · 07-05-2009, 08:16 PM

Thank you!

07-04-2009, 02:37 PM	#1
Sinisterspeed Registered User Join Date: Apr 2008 Location: Gales Creek, Oregon Posts: 619	Parting out 1967 GMC LWB Fleet 1/2 Ton OK i posted some pictures of this truck in the main area laughing about bringing it home the other day after leaving the house for some bolts for my project. There is a ton of Nice parts on this truck. No way can I post prices for each and every part of this truck but I can start with whats already spoken for and some of the big stuff. RH bed side is no good. To much damage to repair it reasonably. ALL SHIPPING WILL BE ACTUAL SHIPPING PLUS A COUPLE BUX CAUSE THEY ARE ALWAYS OFF WHEN I TAKE ITEMS IN. I WILL SHIP USPS UPS FED EX WHATEVER OTHER WAY NEEDS TO BE DONE WITHIN REASON. ALL ITEMS WILL BE SHIPPED FROM 97124 AREA CODE. Horse trading is always welcome as well. THINGS I STILL NEED (changing daily :WINK) 5. Black or Grey seat belts 7. Black or Grey Visor Clips If there is something you see you need just say so, I will get pictures of it and search for some pricing accordingly. I'll Start off with a few things I do know of: STILL FOR SALE 67 Grill (Painted Grill Dent in center top not caved in)---- 40.oo (top bar is removed) Front Fender Drivers Side---- 25.00 ea Front Fender Pass Side (Has Spit at the bottom Corner as seen in pics)---- 25.00 Drivers Side Bedside---- 100.oo Hood Hinges 30.00 Column (Non Tilt 4sp) ---- 50.00 Radio Delete Cowl ---- 35.00 4sp SM420 Trans 50.00 (NO SHIPPING) Glove box door --- 15.00 Seat Belts --- 35.00 Rear End (leaf spring 6 lug) ----75.00 (no shipping) Leaf Springs ---- 75.00 (will ship but they are expensive) clutch pedal and linkage (everything from pedal to trans) 50.00 Complete front end ( Ill cut the frame in front of cab w/new brakes) 50.00 NO SHIPPING on this either. Core Support 35.00 Batt tray 25.00 Drive Shaft 40.00 Anything else that you dont see in the "Still for Sale" or "Sold Items" list let me know and I'll see if its there. SOLD ITEMS Engine Compartment Harness 35.00 SHIPPED sold Carberator w/linkage ---- 30.00 Shipped sold Very Nice 99% rust free 67 Small window cab w/Title---- 500.oo SOLD stored till april when fine69 picks it up Doors Pair ---- 100.oo (Not perfect if you need detailed pics let me know) Sold to fine69 w/cab Engine Bay Harness 35.00 (GMC w/4sp Not sure if there is any diff but this is what its from) sold Very Nice Tilt fwd seat no rips---- 125.oo SOLD TO BRAD Storing till he returns from IRAQ Floor covering ---- 25.00 Sold glimmertwin **Shipped 67 only AshTray---- 10.00 Sold glimmertwin Shipped door sill plates ---- 10.00 Sold glimmertwin Shipped Gas Pedal ---- 5.00 Sold glimmertwin Shipped exhaust pipe ---- Sold pament glimmertwin Shipped Rear Bumper ----25.00 glimmertwin Shipped Ignition/Door Lock Set ---- 30.00 Sold glimmertwin Bed Wood ---- SOLD Keeping Inside Door Panels ---- SOLD Keeping Inside door handles/window cranks----- SOLD thanks Raguemoe Shipped Wheel Wells 85.oo Pr. ----SOLD thanks Raguemoe Shipped Dash Pad 25.00 ---- Sold Raguemoe Shipped Hood 25.oo ---- Sold-Frizzle Fry Picked up. Inner Fenders 25.oo ea ---- Sold-Frizzle Fry Picked up. Rear View Mirror 10.00 ---- Sold CPNE Shipped Guage Cluster 50.00 ---- Sold CPNE Shipped Choke Knob/Cable 5.00 ---- Sold CPNE Shipped Heater Controls ---- Sold CPNE Shipped Steering Wheel ---- Sold to Mullet '72 Shipped Steering Gear 40.00 ---- Sold to Elephanthead Shipped 292 I6 200.00 ---- Sold locally Picked up. Headlight/Wiper Switches 10.oo SHIPPED SOLD nicks05z71 [/B] Shipped Under Dash Wiring 50.oo Shipped Sold to Buckeye1 Shipped [/COLOR] Everything Else** Goes as well Just let me know what you need and I'll get pictures of it (if I have it) __________________ There are two kinds of people, those who finish what they start and so on. 70 GMC Longhorn (A.K.A Money Bucket) 57 Chev 3100 05 Chevy LLY Dmax. 67 Chevy Camaro Dad's Budget Build 55 My Longhorn Build Last edited by Sinisterspeed; 01-21-2010 at 03:02 PM.

07-04-2009, 02:53 PM	#2
Raguemoe Junior Member Join Date: Jan 2007 Location: Highland CA Posts: 742	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton How are the rear wheel well housings (dents,rust,damage). Can you ship the seat and are the window wings/vents chrome (condition). Can we get a pic of the engine compartment! Thanks

07-04-2009, 03:31 PM	#3
Sinisterspeed Registered User Join Date: Apr 2008 Location: Gales Creek, Oregon Posts: 619	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton __________________ There are two kinds of people, those who finish what they start and so on. 70 GMC Longhorn (A.K.A Money Bucket) 57 Chev 3100 05 Chevy LLY Dmax. 67 Chevy Camaro Dad's Budget Build 55 My Longhorn Build

07-04-2009, 03:32 PM	#4
Sinisterspeed Registered User Join Date: Apr 2008 Location: Gales Creek, Oregon Posts: 619	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton __________________ There are two kinds of people, those who finish what they start and so on. 70 GMC Longhorn (A.K.A Money Bucket) 57 Chev 3100 05 Chevy LLY Dmax. 67 Chevy Camaro Dad's Budget Build 55 My Longhorn Build

07-04-2009, 03:34 PM	#5
Sinisterspeed Registered User Join Date: Apr 2008 Location: Gales Creek, Oregon Posts: 619	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton __________________ There are two kinds of people, those who finish what they start and so on. 70 GMC Longhorn (A.K.A Money Bucket) 57 Chev 3100 05 Chevy LLY Dmax. 67 Chevy Camaro Dad's Budget Build 55 My Longhorn Build Last edited by Sinisterspeed; 08-07-2009 at 08:32 PM.

07-04-2009, 03:35 PM	#6
Sinisterspeed Registered User Join Date: Apr 2008 Location: Gales Creek, Oregon Posts: 619	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton __________________ There are two kinds of people, those who finish what they start and so on. 70 GMC Longhorn (A.K.A Money Bucket) 57 Chev 3100 05 Chevy LLY Dmax. 67 Chevy Camaro Dad's Budget Build 55 My Longhorn Build

07-04-2009, 03:57 PM	#8
Raguemoe Junior Member Join Date: Jan 2007 Location: Highland CA Posts: 742	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton Put me in line for the housings, give me a day or so to think about it. Thanks!

07-04-2009, 05:08 PM	#9
Raguemoe Junior Member Join Date: Jan 2007 Location: Highland CA Posts: 742	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton Put me in line for the dash pad also! Thanks Last edited by Raguemoe; 07-04-2009 at 05:09 PM. Reason: Spelling

07-04-2009, 05:46 PM	#10
cobra1966 Registered User Join Date: May 2009 Location: FT POLK, La Posts: 75	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton How about the Front winshield? If its clear of cracks, how much? Do you have the front sway bar? Auto prefered Thanks Lewis

07-04-2009, 08:52 PM	#11
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton Interested in 1. Guage cluster 2. Choke knob/cable, etc 3. Rear bumper brackets 4. GMC grille top bar (possibly whole grille/headlight bezels, inluding top bar if included in $40 price) 5. Headlight wiring harness shipping to 03580 Thanks __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

07-04-2009, 09:01 PM	#12
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton Also Heater control rear view mirror __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

07-04-2009, 09:47 PM	#14
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton Interested in the hood and front inner fenders pending condition and price. I can pick up.

07-04-2009, 09:48 PM	#15
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton Also, I've shipped two bench seats via greyhound. It's usually around $80-$120.

07-04-2009, 09:54 PM	#16
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton I'll pass on the guages, interested in everything else __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

07-04-2009, 09:55 PM	#17
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton Headlight harness does separate at the fuse block in firewall __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all



Register or Log In To remove these advertisements.

07-05-2009, 01:35 AM	#19
jcsarmy Registered User Join Date: Jun 2009 Location: Winona MO Posts: 40	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton Dashpad? ship to 63965 __________________ Im gonna need a lot of help!

07-05-2009, 05:30 PM	#22
Raguemoe Junior Member Join Date: Jan 2007 Location: Highland CA Posts: 742	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton Ok, I'll take the interior handle set, dash pad and wheel wells. PM me with total w/shipping and I'll send payment. I will pass on the rear view mirror and ash tray (I have a set already). Thanks!

07-05-2009, 07:22 PM	#24
Sinisterspeed Registered User Join Date: Apr 2008 Location: Gales Creek, Oregon Posts: 619	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton Hood is Sold L & R inner fenders are Sold Thanks Frizzle Fry! __________________ There are two kinds of people, those who finish what they start and so on. 70 GMC Longhorn (A.K.A Money Bucket) 57 Chev 3100 05 Chevy LLY Dmax. 67 Chevy Camaro Dad's Budget Build 55 My Longhorn Build

07-05-2009, 08:16 PM	#25
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Parting out 1967 GMC LWB Fleet 1/2 Ton Thank you!

Register or Log In To remove these advertisements.